2 layers62.9 × 60.9 mm
2 layers93.2 × 117 mm
ESXAR panelize
nanbuwks/ESXAR- Size
- 93.2 × 117 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 84
- Pads
- 305
- Tracks, vias
- 997, 42
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Jul 2016
- Updated
- 9 Dec 2016
Overview
ESXAR panelize is an open-source printed circuit board by nanbuwks, from the nanbuwks/ESXAR repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 93.2 × 117 mm with 57 parts on 84 nets, routed with 997 tracks and 42 vias.
It is built around the ESP-WROOM-02, TA48M033F and TLP222AF, with the RJ45 among its other parts. Its parts include 20 connectors, 9 ICs, 8 capacitors, 3 resistors and 2 diodes.
Main components
4
ESP-WROOM-02
SMD-18P-40℃~+85℃ -98dBm 170mA 2.4GHz 2.7V~3.6V 20dBm 50mA、56mA ESP8266EX On-board PCB Antenna UART、SPI、I2C、GPIO、PWM、I2S SMD-18P WiFi Modules ROHSEspressif SystemsWiFi ModulesTA48M033F
HSOP3-P-2.30DHSOP3-P-2.30D SMT ROHSToshibaUncategorised
TLP222AF
DIP-41.3V 100us 2.5kV 2Ω 60V 800us One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays - MOS Output (PhotoMOS)
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdESXAR
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | library:C_1206_HandSoldering_Small | C2, C9 |
| 2 | 100uF | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C5, C8 |
| 2 | 10uF | library:C_1206_HandSoldering_Small | C6, C7 |
| 2 | ANALOG | library:SolderWirePad_Oval_3xInline_0-65mmDrill | P1, P13 |
| 2 | RJ45 | libraly:RJ45_7810-8P8C | J1, J2 |
| 2 | UNIVERSAL | library:SolderWirePad_Oval_9xInline_0-7mmDrill | P19, P20 |
| 2 | higanbana_M | library:higanbana_M | U***, U*** |
| 1 | 1.1 | library:OSHW_LOGL_SYLK_5mm | OSHW |
| 1 | 10uF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1 |
| 1 | 4.7kΩ | Discret:R1 | R13 |
| 1 | 4.7kΩ | Resistors_SMD:R_1206 | R1 |
| 1 | 4.7uH | library:C_1206_HandSoldering_Small | L1 |
| 1 | 4UNIT_R_PACK | library:R_Array_For_R_Multi_library_4x1206 | RP2 |
| 1 | AUDIO_JACK | library:3_5mm_4P_phonejack_yizhijia_PJ313 | U3 |
| 1 | BARREL_JACK | library:DCJACK | CON1 |
| 1 | BEEP | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | SP2 |
| 1 | BREADBOARD | library:SolderWirePad_Oval_9xInline_0-6mmDrill | P2 |
| 1 | BREADBOARD_POWER | library:Padmatrix-wide-02x01 | P16 |
| 1 | CONN_01X02 | Connect:bornier2 | P1 |
| 1 | CP | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C3 |
| 1 | DIN | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW2 |
| 1 | ESP-WROOM-02 | library:ESP_WROOM_02 | U1 |
| 1 | EXTIO | library:SolderWirePad_Oval_9xInline_0-7mmDrill | P18 |
| 1 | GNDJP | library:SolderWirePad_Oval_9xInline_0-6mmDrill | P7 |
| 1 | JUMPER | Pin_Headers:Pin_Header_Straight_1x02 | JP3 |
| 1 | LD1117CV33 | Power_Integrations:TO-220 | U7 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | LED_RCBG | LEDs:LED-RGB-5MM_Common_Cathode | D2 |
| 1 | LM2596HV_DCDC_Module | libraly:DCDC_MODULE_LM2596HVS | U1 |
| 1 | L_Small | library:C_1206_HandSoldering_Small | L2 |
| 1 | MODEJP | library:SolderWirePad_Oval_9xInline_0-6mmDrill | P5 |
| 1 | MODE_JP | library:SolderWirePad_Oval_3xInline_0-65mmDrill | JP1 |
| 1 | MT5201-3.3N | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | Mini360 | library:Mini-360_DCDC_LM2596_module | U6 |
| 1 | PROGRAM | library:SolderWirePad_Oval_5xInline_0-65mmDrill | P3 |
| 1 | PolyHuse | Discret:R3 | TH1 |
| 1 | R | Discret:R4 | R1 |
| 1 | RASPBERRYPI_GPIO_40 | Pin_Headers:Pin_Header_Straight_2x20 | U2 |
| 1 | RESET | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW1 |
| 1 | R_PACK4 | Resistors_SMD:R_Array_Convex_4x1206 | RP1 |
| 1 | SCREW | Connect:bornier3 | P8 |
| 1 | SENSOR | Connect:bornier3 | P17 |
| 1 | SERVO/INPUT | library:SolderWirePad_Oval_3xInline_0-65mmDrill | P12 |
| 1 | SPEAKER | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | SP1 |
| 1 | TA48M033F | TO_SOT_Packages_THT:SOT126_SOT32_Housing_Vertical_Mirrored | U8 |
| 1 | TLP222A | Opto-Devices:Optocoupler_SMD_HandSoldering_KPC357_LTV35x_PC357_SingleChannel | U5 |
| 1 | USB_A | library:USB_A_Vertical_Short | P10 |
| 1 | USB_B | library:USB_A_Male_Board | P11 |
| 1 | VCCJP | library:SolderWirePad_Oval_9xInline_0-6mmDrill | P6 |
| 1 | WAKEUP | library:Solder_Jumper_3 | JP2 |
More from nanbuwks/ESXAR
1Similar boards
- 2 layers200 × 150 mm
- 2 layers55.9 × 55.9 mm
- 2 layers68 × 86.9 mm
NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.
95 parts5CC-BY-SA-4.0 - 2 layers100.3 × 99.3 mm
Miatuino
Maverick765/miatuino
まずはアクセルを完全に戻した状態で[Closed throttle ADC Count]の右の[Get Current]をクリックして、スロットル全閉時の値を取得します。 次に、アクセルを完全に踏み込んだ状態で[Full throttle ADC Count]の右の[Get Current]をクリックして、スロットル前回時の値を取得します。 完了したら[Accept]をクリックします。
121 parts1GPL-2.0 - 4 layers85 × 45 mm
Poc 4cell
cajt/poc-scp-ft-4s-bms-app
Proof of concept fault tolerant SCP with a BMS Application.
85 partsBSD-2-Clause - 2 layers81.3 × 63.5 mm
- 2 layers21 × 37.3 mm
- 2 layers113.5 × 70.5 mm
Questions
How big is the ESXAR panelize PCB?
It measures 93.2 × 117 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESXAR panelize use?
57 parts, built around the ESP-WROOM-02, TA48M033F, TLP222AF and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESXAR panelize KiCad files?
From the nanbuwks/ESXAR repository on GitHub, at the commit this page was made from: the board is ESXAR_panelize.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESXAR panelize design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).