
Microinstruction counter
jerry-kerenzikov/ytterbium
Project files for Ytterbium modular CPU platform and Yprog programming tool

WiFi Modem for Vintage Computers
Wifi modem is an open-source printed circuit board by umamibeef, from the umamibeef/wifi-modem repository on GitHub, published under the MIT licence. It is a 2-layer board of 69 × 67 mm with 59 parts on 53 nets, routed with 564 tracks and 110 vias.
It is built around the 74HC245D, ESP-12F and MAX232N, with the FT232RL, 74LVC1G11GW and LM1117-3.3 among its other parts. Its parts include 17 capacitors, 16 resistors, 8 diodes, 6 ICs and 3 connectors. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
WiFi Modem for Vintage Computers
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C5, C6, C7, C8, C9, C10, C11, C12, C14, C16, C17 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R12, R13, R14, R15, R16 |
| 8 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11 |
| 8 | LED | LED_THT:LED_Rectangular_W3.9mm_H1.8mm_FlatTop | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4 |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C15 |
| 1 | 33 Ohms @ 100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | 4.7u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C13 |
| 1 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | 74LVC1G11 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U6 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U4 |
| 1 | Jumper_NO_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MAX232 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U5 |
| 1 | RS232 DB9 | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |

jerry-kerenzikov/ytterbium
Project files for Ytterbium modular CPU platform and Yprog programming tool


mggates39/68hc11_SBC
Building a Single Board Computer around the MC68HC11. It will include my first attempt with KiCad designing a PCB



mbuyukeskil/kicad-hardware-projects
KiCad PCB design projects, schematics, layouts, 3D views and manufacturing files.

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

It measures 69 × 67 mm and has 2 copper layers, 1.6 mm thick.
59 parts, built around the 74HC245D, ESP-12F, MAX232N and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the umamibeef/wifi-modem repository on GitHub, at the commit this page was made from: the board is pcb/wifi-modem.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).