
-816-board
snippyrow/-816-board
A retro computer motherboard for the W65C816S CPU. Dual-core expandable, 16mb extended memory, four expansion ports.

Building a Single Board Computer around the MC68HC11. It will include my first attempt with KiCad designing a PCB
68hc11 is an open-source printed circuit board by mggates39, from the mggates39/68hc11_SBC repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 190 × 125 mm with 58 parts on 157 nets, routed with 1,716 tracks and 110 vias.
It is built around the 74HC245D, MAX232N and 74LS32SC, with the 74HC373D, 74LS04PC and 74LS21PC among its other parts. Its parts include 23 capacitors, 17 ICs, 7 connectors, 2 resistors and 1 diode. It belongs with the computers and single-board computers boards of this library.
Building a Single Board Computer around the MC68HC11. Specifically the XC68HC11A1FN - A38P8642. It will include my first attempt with KiCad designing a PCB
Software built with TASM
Run in the 68HC11 Simulator
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3, C4, C5, C6, C7, C8, C9, C10, C17, C18, C19, C20, C21, C22, C23 |
| 4 | 10 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C13, C14, C15, C16 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4 |
| 3 | 27C64 | Package_DIP:DIP-28_W15.24mm | U6, U7, U16 |
| 2 | 22pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C11, C12 |
| 2 | 74LS138 | Package_DIP:DIP-16_W7.62mm | U5, U11 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U13, U14 |
| 2 | MC68B21 | Package_DIP:DIP-40_W15.24mm | U2, U17 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 4.7 k | Resistor_THT:R_Array_SIP8 | RN1 |
| 1 | 74HC245 | Package_DIP:DIP-20_W7.62mm | U4 |
| 1 | 74HC373 | Package_DIP:DIP-20_W7.62mm | U3 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U15 |
| 1 | 74LS21 | Package_DIP:DIP-14_W7.62mm | U12 |
| 1 | 8.0 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | Address Bus | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J11 |
| 1 | BootSel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP4 |
| 1 | DB9_Female | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J2 |
| 1 | Data Bus | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J7 |
| 1 | HM62256BLP | Package_DIP:DIP-28_W15.24mm | U8 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | MAX232 | Package_DIP:DIP-16_W7.62mm | U9 |
| 1 | MC68HC11A1CC-PLLC | Package_LCC:PLCC-52_THT-Socket | U1 |
| 1 | MCP100-270D | Package_TO_SOT_THT:TO-92 | U10 |
| 1 | PIA 1 Ports A and B | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J5 |
| 1 | PIA 2 Ports A and B | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J8 |
| 1 | Ports A and E | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J4 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB3076-30-A | digikey-footprints:USB_Micro_B_Female_10118193-0001LF | J1 |

snippyrow/-816-board
A retro computer motherboard for the W65C816S CPU. Dual-core expandable, 16mb extended memory, four expansion ports.

Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips

wnoisephx/BenEater-6502
A KiCad PCB layout for Ben Eater's 6502 computer with some minor updates and an expanded I/O

fenr1r/Z8800_Super8_testboard
Test board for MCU Z08800020 (Super8 / Z8) from Zilog.

SmallRobot2000/AMIX-68k
Motorola 68010 based sbc with IDE, keyboard, DMA, PIT, Xosera & more!



jimbro1000/DIY-Video
General purpose video system for 8-bit computers using 74LS logic
It measures 190 × 125 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the 74HC245D, MAX232N, 74LS32SC and 74HC373D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mggates39/68hc11_SBC repository on GitHub, at the commit this page was made from: the board is Schematics/68hc11/68hc11.kicad_pcb and its schematic Schematics/68hc11/68hc11.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).