2 layers99.8 × 99.9 mm
SignalGenerator
ukmaker/SignalGenerator
Signal generator based on AD9850, AD603 and Arduino Nano
117 parts1
2 layers95.9 × 75.1 mm
Controller
ukmaker/SignalGenerator1Signal generator based on AD9850, AD603 and Arduino Nano
- Size
- 95.9 × 75.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 44
- Pads
- 124
- Tracks, vias
- 286, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 May 2017
- Updated
- 12 Aug 2017
Overview
Controller is an open-source printed circuit board by ukmaker, from the ukmaker/SignalGenerator repository on GitHub. It is a 2-layer board of 95.9 × 75.1 mm with 25 parts on 44 nets, routed with 286 tracks and 30 vias.
It is built around the MCP4728-E/UN. Its parts include 10 connectors, 5 ICs, 3 capacitors, 1 resistor and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
Controller/V2/README.mdChanges from V1:
Correct connection of SDA and SCL to Arduino Nano
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3, J4, J5, J6, J7, J9, J10 |
| 2 | C | Capacitors_ThroughHole:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 7805 | UKMaker:7805-TO-220_Vertical | U2 |
| 1 | AD9850_DDS_Module | UKMaker:AD9850_DDS_Module | U4 |
| 1 | ARDUINO_NANO | UKMaker:Arduino_nano | U1 |
| 1 | BS107 | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J8 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | CONN_02X08 | Connect:IDC_Header_Straight_16pins | J1 |
| 1 | CP | Capacitors_ThroughHole:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | D | Diodes_ThroughHole:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | MCP4728 | Housings_DIP:DIP-10_W7.62mm | U3 |
| 1 | R | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | RELAY-G5V-1 | SparkFun:SparkFun-RELAY-G5V | U5 |
The 21 most common of 25 parts.
Questions
How big is the Controller PCB?
It measures 95.9 × 75.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
25 parts, built around the MCP4728-E/UN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the ukmaker/SignalGenerator repository on GitHub, at the commit this page was made from: the board is Controller/V1/Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask ukmaker before reusing the design.
More from ukmaker/SignalGenerator
3- 2 layers100 × 80 mm
- 2 layers99.7 × 70 mm
Similar boards
- 4 layers70.8 × 108 mm
- 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 2 layers99.1 × 99.1 mm
Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 4 layers100 × 100 mm
ETH OPAMP DCMI FSMC CAN ENCODER CS1000
DanielMartensson/STM32-Ethernet-Camera
PCB board with camera and ethernet connection + CAN-bus
144 parts16MIT - 2 layers58.4 × 108.7 mm
Circuit pcb
Testbild-synth/dual-vcadsr
Dual Voltage controlled envelope/LFO/Random (Sample/hold) eurorack module
69 parts14 - 4 layers89 × 61 mm
- 2 layers58 × 109 mm
- 2 layers90.2 × 109.9 mm
Circuit pcb smd dac
Testbild-synth/super-sweet-16
Deluxe 16-step knob-per-function sequencer Module for eurorack
163 parts12MIT