6 layers55 × 40 mm
CM5-AI Cam CopperPilot
CopperPilot/CM5-AI-Cam-CopperPilot
A Raspberry Pi Compute Module 5 carrier for edge AI vision, in the CM5's own 55 × 40 mm footprint. 100 Ω MIPI and HDMI pairs, 90 Ω USB.
90 parts
4 layers82 × 35 mm
ESP32CAM
uawortu/BREAN2custom esp32cam+oled
- Size
- 82 × 35 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 87
- Pads
- 352
- Tracks, vias
- 924, 164
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Nov 2023
- Updated
- 29 Oct 2024
Overview
ESP32CAM is an open-source printed circuit board by uawortu, from the uawortu/BREAN repository on GitHub. It is a 4-layer board of 82 × 35 mm with 91 parts on 87 nets, routed with 924 tracks and 164 vias.
It is built around the ESP32-S3, AMS1117-3.3 and RT9013-12GB, with the RT9013-28GB, B3U-1000P and S8050 among its other parts. Its parts include 35 resistors, 21 capacitors, 7 diodes, 7 switches and 6 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RT9013-12GB
SOT-23-5-40℃~+125℃@(Tj) 1 1.2V 25uA 30uVrms 400mV@(500mA) 5.5V 500mA 50dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRT9013-28GB
SOT-23-5-40℃~+85℃@(Ta) 1 100mV@(100mA)、300mV@(200mA) 2.8V 500mA 50uVrms 60uA 70dB@(1kHz) 7V Enable Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdBREAN
Custom esp32cam
Video : I made a CUSTOM ESP32CAM！ - YouTube
Information provided
- 3dmodels
- Images and renders
- Gerber files
- My code and code used
- Print files
I'll give a proper description in time
BOM/PART LIST
Google sheets CSV file download
BREAN=beans+bread
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R8, R9, R10, R12, R20, R21, R24, R25 |
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C10, C13, C14, C17, C20, C21, C22 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R15, R16, R30, R37 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6, C8, C9, C11 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R11, R13, R14, R19 |
| 5 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R26, R27, R28 |
| 5 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C18, C19 |
| 4 | B3U-1000P | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | S4, S5, S6, S7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.7mm | H1, H2, H3, H4 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R34, R36 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4 |
| 3 | B3U-1000P | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | S1, S2, S3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D5 |
| 3 | S8050 | digikey-footprints:SOT-23-3 | Q2, Q5, Q6 |
| 3 | SZESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D1, D4, D6 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33, R35 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J5 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C7 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 15pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x24 | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J4 |
| 1 | ESP-32S | KiCad:ESP32S | IC1 |
| 1 | LED | LED_SMD:LED_Kingbright_AAA3528ESGCT | D7 |
| 1 | MX25R3235FM1xx1 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Micro_SD_Card_Det1 | MICRO SD forum:J_SD_Card-micro_socket_A | J7 |
| 1 | PMOS | digikey-footprints:SOT-23-3 | Q1 |
| 1 | RT9013-12 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RT9013-28 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 90 most common of 91 parts.
Similar boards
- 4 layers135 × 101.3 mm
Nft hydroponic controller
hasan-abuzaid/nft-hydroponic-controller
Open-hardware ESP32-S3 controller for NFT hydroponics: pH/EC/level sensing, 6 relay channels, ESPHome + Home Assistant
107 partsCERN-OHL-S-2.0 - 2 layers
- 4 layers33.8 × 38 mm
Watchy MrT ESP32-S3-V1
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
86 parts1 - 4 layers39.3 × 63.8 mm
EMERSON'S HANDHELD GAME
Batterhead221/game_girl
game_girl is a custom ESP32-S3 handheld mini-arcade built around a monochrome OLED display, rotary encoder controls, button input, buzzer audio, and battery support.
25 parts - 4 layers153.7 × 108.5 mm
- 2 layers42 × 30.8 mm
- 2 layers58.4 × 80.6 mm
Questions
How big is the ESP32CAM PCB?
It measures 82 × 35 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32CAM use?
91 parts, built around the ESP32-S3, AMS1117-3.3, RT9013-12GB and RT9013-28GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32CAM KiCad files?
From the uawortu/BREAN repository on GitHub, at the commit this page was made from: the board is Hardware/ESP32CAM.kicad_pcb and its schematic Hardware/ESP32CAM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32CAM design in my own project?
Its repository states no licence, so its author keeps all rights: ask uawortu before reusing the design.