
Watchy MrT ESP32-S3-V1
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
Watchy MrT ESP32-S3-V1 is an open-source printed circuit board by MrT-Stephens, from the MrT-Stephens/Watchy-MrT-Stephens repository on GitHub. It is a 4-layer board of 33.8 × 38 mm with 86 parts on 83 nets, routed with 1,251 tracks and 608 vias.
It is built around the ESP32-S3, BME688 and BMM150, with the BMP390, W25Q128JVPIQ and BMA400 among its other parts. Its parts include 32 capacitors, 19 resistors, 10 ICs, 6 diodes and 4 switches. It belongs with the ESP32 boards of this library.
Watchy Esp32-S3 • Watchy Esp32-S3 specifications • Watchy Esp32-S3 3D-Models
Current Version = V1.2
Note The version 1.2 has not been tested yet, as version 1.1 was having issues with the I2C bus.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C17, C19, C25, C26, C27, C28, C29, C30 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C21, C22, C31, C34 |
| 6 | 1uF/50V | Capacitor_SMD:C_0603_1608Metric | C10, C12, C13, C14, C15, C16 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R14, R15, R16, R17 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | 3V3, GND, SCL, SDA, VCC |
| 3 | BTN | Watchy:K2-1114SA-A4SW-06 | SW1, SW2, SW3 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C7, C33 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C18, C32 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 1 | 10uH 1A | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L2 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 1N4001 | Diode_SMD:D_SOD-123F | D6 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 1uF/50V | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 3 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 40 MHz | Oscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | Y1 |
| 1 | 442k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BAT60B | BAT60B:SOD2512X115N | D4 |
| 1 | BMA400 | open-Smartwatch:LGA-12_2x2mm_P0.5mm | U8 |
| 1 | BME688 | BME688:IC_BME688 | U4 |
| 1 | BMM150 | BMM150:XDCR_BMM150 | U7 |
| 1 | BMP390 | BMP390:BMP390 | IC2 |
| 1 | Battery | Watchy:1.25T-2PWT (Molex 532610271) | J3 |
| 1 | CJ2301 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | DS3231MZ | DS3231MZ:21-0041B_8 | U6 |
| 1 | Device_Antenna_Chip | Watchy:SWRA117D | AE1 |
| 1 | ESP32-S3 | ESP32-S3R8:QFN40P700X700X90-57N | U1 |
| 1 | FPC24(0.5MM) | Watchy:24_Pins_0.5mm_Pitch_ZIF_Connector_UP | J1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D5 |
| 1 | NCP167BMX330TBG | NCP167BMX330TBG:REG_NCP167BMX330TBG | U3 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | SHT4XA | SHT4XA:SHT4XA | U9 |
| 1 | SW_Push | open-Smartwatch:button_side_smd | SW4 |
| 1 | TP4054 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB4110-GF-A_REVB | USB4110-GF-A_REVB:GCT_USB4110-GF-A_REVB | J2 |
| 1 | Vibration_Motor | Watchy:Motor_Header | M1 |
| 1 | W25Q128JVPIQ | W25Q128JVPIQ:SON127P600X500X80-9N-D | IC1 |

MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

ccadic/The603-200
One of the most strange Vintage Connected Watch project - 192 LED and ESP32



Merix-Industries/CanSat-STM-PCB
A custom-designed PCB for a CanSat project, built around the STM32F405RGT microcontroller. The board integrates all essential subsystems for atmospheric data collection, positioning, and communication into a single…




SpaceTeam/STS1_EDU_Hardware
Contains all Hardware Informations from EDU 2.6 onwards
It measures 33.8 × 38 mm and has 4 copper layers, 0.8 mm thick.
86 parts, built around the ESP32-S3, BME688, BMM150 and BMP390. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MrT-Stephens/Watchy-MrT-Stephens repository on GitHub, at the commit this page was made from: the board is Watchy-MrT-ESP32-S3-V1.2/Watchy-MrT-ESP32-S3-V1.kicad_pcb and its schematic Watchy-MrT-ESP32-S3-V1.1/MCU_Sheet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MrT-Stephens before reusing the design.