4 layers81.1 × 85 mm
STS1 EEE
SpaceTeam/STS1_EEE
The STS1 EPS EDU Ersatzboard is intended to replace the EPS board with a simple 4×AA-type battery voltage source and provide an interface to the Raspberry Pi HAT.
43 parts
4 layers81.1 × 85 mm
STS1 EDU V3 0
SpaceTeam/STS1_EDU_Hardware2Contains all Hardware Informations from EDU 2.6 onwards
- Size
- 81.1 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 170
- Pads
- 645
- Tracks, vias
- 1,064, 229
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Feb 2024
- Updated
- 14 Jun 2024
Overview
STS1 EDU V3 0 is an open-source printed circuit board by SpaceTeam, from the SpaceTeam/STS1_EDU_Hardware repository on GitHub. It is a 4-layer board of 81.1 × 85 mm with 108 parts on 170 nets, routed with 1,064 tracks and 229 vias.
It is built around the BME688, BMM150 and MP28167GQ-P, with the PCA9546APW, ADXL345BCCZ-RL and L3GD20H among its other parts. Its parts include 32 capacitors, 30 resistors, 10 ICs, 7 connectors and 6 diodes.
Main components
8
BME688
SMD-8P-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 2.1uA I2C、SPI ±0.5℃ ±3%RH SMD-8P Temperature and Humidity Sensor ROHSBosch SensortecTemperature And Humidity Sensor
BMM150
WLCSP-12(1.6x1.6)-40℃~+85℃ 1.62V~3.6V I2C、SPI ±1.3mT ±2.5mT WLCSP-12(1.6x1.6) 3D Magnetic Sensors ROHSBosch3D Magnetic SensorsMP28167GQ-P
QFN-16(3x3)-40℃~+125℃ 1 1mA 2.8V~22V 3A 500kHz 5V Buck-Boost Buck-Boost Built-in Fixed Yes QFN-16(3x3) DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
PCA9546APW
TSSOP-16-40℃~+85℃ 2.3V~5.5V I2C、SMBus TSSOP-16 Interface - Specialized ROHSTexas InstrumentsInterface - Specialized
ADXL345BCCZ-RL
LGA-14-40℃~+85℃ 100nA 13bit 2V~3.6V Accelerometer SPI、I2C X,Y,Z ±16g LGA-14(3x5) Accelerometers ROHSAnalog DevicesAccelerometers
L3GD20H
LGA-16-40℃~+85℃ 16bit 1uA 2.2V~3.6V Gyroscope SPI、I2C X,Y,Z ±2000dps LGA-16 Accelerometers ROHSSTMicroelectronicsAccelerometers
AQ1003-01LTG
SOD-523200nA 24V 26V 300W@8/20us 42V 50pF 7A@8/20us IEC 61000-4-2、IEC 61000-4-5 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
UCLAMP0871P.TNT
SGP1610-2-40℃~+125℃ 1 100nA 23V 475pF 65A@8/20us 8V 9.5V IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SGP1610-2 ESD and Surge Protection (TVS/ESD) ROHSSEMTECHUncategorised
README
README.mdSTS1_EDU_Hardware
Contains all Hardware Informations from EDU 2.6 onwards
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9, R10, R16, R17, R18, R19, R20, R21, R22, R23, R24, R27, R30 |
| 8 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23, C25, C27, C28, C29 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C11, C12, C13 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C19, C20, C21 |
| 4 | 1k8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R28, R29 |
| 4 | Conn_01x04 | Connector_FFC-FPC:Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal | J4, J5, J6, J7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R13 |
| 3 | 47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4 |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C5, C16 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C32 |
| 2 | 4u7 | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L2, L3 |
| 2 | 54548-2271 | 54548-2271:545482271 | CAM1, CAM2 |
| 2 | Blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H5, H6 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 1 | 0.01µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31 |
| 1 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 100mR | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10nF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C30 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 21k5 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 2k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 4.7uH | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | ADXL345BCCZ-RL | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U4 |
| 1 | AQ1003-01LTG | Diode_SMD:D_SOD-523 | D4 |
| 1 | BME688 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U5 |
| 1 | BMM150 | Package_CSP:WLCSP-12_1.56x1.56mm_P0.4mm | U6 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x02_P2.00mm_Vertical | CSBI_2 |
| 1 | Conn_02x25_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x25_P2.00mm_Vertical | CSBI_1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | L3GD20H | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U7 |
| 1 | MP28167GQ | STS_Package_DFN_QFN:MP28167_QFN16 | U2 |
| 1 | PCA9546APW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 1 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | SODIMM-200 | 1717254-4:17172544 | J1 |
| 1 | ST_Logo | STS_Logo:STLogo_7x8 | U10 |
| 1 | TMP112AIDRLT | Package_TO_SOT_SMD:SOT-563 | U8 |
| 1 | UCLAMP0871P.TNT | STS_Package_DFN_QFN:SGP1610N2 | D3 |
| 1 | coordinate_system | STS:Coordinates | U1 |
| 1 | ~ | PAM2306AYPKE:SON45P300X300X80-13N | U3 |
Similar boards
- 4 layers65 × 56 mm
EDU V3 0 Raspi Hat
SpaceTeam/EDU_RASPI_HATS
This Repo contains the EDU Raspberry Pi hats from STS1.
38 parts - 2 layers36 × 38 mm
- 4 layers46.8 × 52.4 mm
- 4 layers33.8 × 38 mm
Watchy MrT ESP32-S3-V1
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
86 parts1 - 2 layers58 × 84 mm
- 2 layers152 × 85 mm
- 2 layers55.6 × 48.8 mm
AAquad PCB
Fberbari/AAquad
(OUTDATED, see AAQuad-Evolution) a baremetal implementation of a multirotor flight computer.
38 partsGPL-3.0
Questions
How big is the STS1 EDU V3 0 PCB?
It measures 81.1 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STS1 EDU V3 0 use?
108 parts, built around the BME688, BMM150, MP28167GQ-P and PCA9546APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STS1 EDU V3 0 KiCad files?
From the SpaceTeam/STS1_EDU_Hardware repository on GitHub, at the commit this page was made from: the board is STS1_EDU_V3_0/STS1_EDU_V3_0.kicad_pcb and its schematic STS1_EDU_V3_0/STS1_EDU_V3_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STS1 EDU V3 0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SpaceTeam before reusing the design.