4 layers81.1 × 85 mm
STS1 EDU V3 0
SpaceTeam/STS1_EDU_Hardware
Contains all Hardware Informations from EDU 2.6 onwards
108 parts2
4 layers65 × 56 mm
EDU V3 0 Raspi Hat
SpaceTeam/EDU_RASPI_HATSThis Repo contains the EDU Raspberry Pi hats from STS1.
- Size
- 65 × 56 mm
- Copper layers
- 4
- Thickness
- 4.48 mm
- Parts
- 38
- Nets
- 47
- Pads
- 156
- Tracks, vias
- 228, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Apr 2024
- Updated
- 13 Apr 2024
Overview
EDU V3 0 Raspi Hat is an open-source printed circuit board by SpaceTeam, from the SpaceTeam/EDU_RASPI_HATS repository on GitHub. It is a 4-layer board of 65 × 56 mm with 38 parts on 47 nets, routed with 228 tracks and 25 vias.
It is built around the BME688, BMM150 and ADXL345BCCZ-RL, with the L3GD20H among its other parts. Its parts include 10 capacitors, 8 resistors, 6 ICs, 4 diodes and 4 connectors.
Main components
4
BME688
SMD-8P-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 2.1uA I2C、SPI ±0.5℃ ±3%RH SMD-8P Temperature and Humidity Sensor ROHSBosch SensortecTemperature And Humidity Sensor
BMM150
WLCSP-12(1.6x1.6)-40℃~+85℃ 1.62V~3.6V I2C、SPI ±1.3mT ±2.5mT WLCSP-12(1.6x1.6) 3D Magnetic Sensors ROHSBosch3D Magnetic Sensors
ADXL345BCCZ-RL
LGA-14-40℃~+85℃ 100nA 13bit 2V~3.6V Accelerometer SPI、I2C X,Y,Z ±16g LGA-14(3x5) Accelerometers ROHSAnalog DevicesAccelerometers
L3GD20H
LGA-16-40℃~+85℃ 16bit 1uA 2.2V~3.6V Gyroscope SPI、I2C X,Y,Z ±2000dps LGA-16 Accelerometers ROHSSTMicroelectronicsAccelerometers
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C6, C9 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7 |
| 4 | 3mm_Mounting_Hole | project_footprints:NPTH_3mm_ID | H1, H2, H3, H4 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R8 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J4 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 10nF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 40HAT | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | ADXL345BCCZ-RL | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U5 |
| 1 | BME688 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U1 |
| 1 | BMM150 | Package_CSP:WLCSP-12_1.56x1.56mm_P0.4mm | U3 |
| 1 | L3GD20H | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | LOGO | project_footprints:Logo_mod | G*** |
| 1 | LOGO | project_footprints:QRNeu__mod | G*** |
| 1 | TMP112AIDRLT | Package_TO_SOT_SMD:SOT-563 | U4 |
| 1 | coordinate_system | STS:Coordinates | U1 |
Similar boards
- 2 layers36 × 38 mm
- 4 layers46.8 × 52.4 mm
- 4 layers33.8 × 38 mm
Watchy MrT ESP32-S3-V1
MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".
86 parts1 - 2 layers58 × 84 mm
- 2 layers152 × 85 mm
- 2 layers55.6 × 48.8 mm
AAquad PCB
Fberbari/AAquad
(OUTDATED, see AAQuad-Evolution) a baremetal implementation of a multirotor flight computer.
38 partsGPL-3.0 - 6 layers70 × 40.5 mm
FMUv246-imported
yagamy4680/drone-study
AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)
290 parts
Questions
How big is the EDU V3 0 Raspi Hat PCB?
It measures 65 × 56 mm and has 4 copper layers, 4.48 mm thick.
What parts does the EDU V3 0 Raspi Hat use?
38 parts, built around the BME688, BMM150, ADXL345BCCZ-RL and L3GD20H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDU V3 0 Raspi Hat KiCad files?
From the SpaceTeam/EDU_RASPI_HATS repository on GitHub, at the commit this page was made from: the board is EDU_V3_0_Raspi_Hat/EDU_V3_0_Raspi_Hat.kicad_pcb and its schematic EDU_V3_0_Raspi_Hat/EDU_V3_0_Raspi_Hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDU V3 0 Raspi Hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask SpaceTeam before reusing the design.