Skip to the content
123

CJ2301

Jiangsu Changjing Electronics Technology (CJ)Extended

-55℃~+150℃ 1 P-Channel 142mΩ@2.5V 1V 2.3A 20V 400mW 405pF 55pF 75pF P-Channel SOT-23 MOSFETs ROHS

Part id
cj/CJ2301
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
0 at JLCPCB (C2910170)
Used on
18 open-source boards

Overview

The CJ2301 is a MOSFET made by Jiangsu Changjing Electronics Technology (CJ) in a SOT-23 package with 3 pins. -55℃~+150℃ 1 P-Channel 142mΩ@2.5V 1V 2.3A 20V 400mW 405pF 55pF 75pF P-Channel SOT-23 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_PMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2910170). 18 open-source boards in 14 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_PMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the CJ2301
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

18See all 18
  • 2 layers33.8 × 46 mmWatchy, the printed circuit board in 3D

    Watchy

    xywatch/watchy-hardware-v2

    watchy hardware v2 with typec

    64 parts8
  • 2 layers25.6 × 44.5 mmEsp32-chungus lipo, the printed circuit board in 3D

    Esp32-chungus lipo

    ayan4m1/esp-chungus

    Chungus is an ESP32-S3 development board created as a learning exercise in KiCad.

    27 parts2MIT
  • 2 layers38 × 60 mmCrossometer mini, the printed circuit board in 3D

    Crossometer mini

    fredszaq/crossometer-mini

    Design files for crossometer-mini device

    63 parts2CERN-OHL-S-2.0
  • 4 layersSuborbitum 25, the printed circuit board in 3D

    Suborbitum 25

    Merix-Industries/CanSat-STM-PCB

    A custom-designed PCB for a CanSat project, built around the STM32F405RGT microcontroller. The board integrates all essential subsystems for atmospheric data collection, positioning, and communication into a single…

    127 parts1MIT
  • 4 layers33.8 × 38 mmWatchy MrT ESP32-S3-V1, the printed circuit board in 3D

    Watchy MrT ESP32-S3-V1

    MrT-Stephens/Watchy-MrT-Stephens

    This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

    86 parts1
  • 4 layers45 × 50 mmChip8-pcb, the printed circuit board in 3D

    Chip8-pcb

    plorefice/chip8-rs

    CHIP-8 interpreter written in Rust

    58 parts1
  • 4 layers88.4 × 63.2 mmRobot Controller PCB, the printed circuit board in 3D

    Robot Controller PCB

    akashh218/Voice-and-AI-Enabled-Intelligent-Robot-Controller-PCB

    Custom 4-layer PCB for a voice and AI-enabled intelligent robot, integrating ESP32 control, dual DC motors, three servos, voice recognition, AI audio interaction, temperature monitoring, RGB LEDs, and expansion…

    84 parts
  • 4 layers33.8 × 46 mmV2-baseline, the printed circuit board in 3D

    V2-baseline

    jamesjnadeau/watchy-ref-counter

    I have clone the repo locally at ../Watchy

    70 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CJ2301?

Yes. The symbol is Pinmap_Generic:Q_PMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CJ2301?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the CJ2301 datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the CJ2301?

JLCPCB lists it as part C2910170, with 0 in stock; the sellers' links on this page open their listings.

What can replace the CJ2301?

Parts like it in the library: the AO3400 by GOODWORK, the AP2300 by ALLPOWER, the SI2302-2.3A-JSM by JSMSEMI and the AO3400A by Alpha & Omega Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CJ2301?

18 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.