

Tympan Rev E
Repository for Tympan Rev E Electronics and case designs
- Size
- 38 × 74 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 181
- Pads
- 440
- Tracks, vias
- 816, 139
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Jan 2020
- Updated
- 19 Jan 2024
Overview
Tympan Rev E is an open-source printed circuit board by Tympan, from the Tympan/Tympan_Rev_E_Hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 38 × 74 mm with 93 parts on 181 nets, routed with 816 tracks and 139 vias.
It is built around the TEENSY 4.1, TLV320AIC3206IRSBT and 74LVC1G66GW, with the LP5907MFX-1.8, MCP73831 and SPM0687LR5H-1 among its other parts. Its parts include 33 resistors, 26 capacitors, 13 connectors, 7 ICs and 4 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
10TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedTLV320AIC3206IRSBT
WQFN-40(5x5)-40℃~+85℃ 1.5V~5.5V 48kHz Encoder/decoder I2C、SPI WQFN-40(5x5) Audio Interface ICs ROHSTexas InstrumentsAudio Interface ICs74LVC1G66GW
SOT-353-40℃~+125℃ 1.65V~5.5V 11pF 155MHz 1:1 4.2ns 5.3ns 600ps 6Ω SOT-353 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, MultiplexersLP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP73831
UncategorisedMicrochip TechnologySPM0687LR5H-1
SMD-40dB 1.15mm 2.3V~3.6V 285uA 3.76mm 300Ω 4.72mm 70dB Differential output Omnidirectional SMD MEMS Microphones ROHSKnowlesMEMS MicrophonesAPHB1608SGNC
SMD-4P-40℃~+85℃ 130° 15mcd、15mcd 2.05V、2.2V 565nm、607nm 568nm、602nm Orange, Green Water Clear SMD-4P LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteCL-SB-22A-01
-Slide SwitchesNidecSJ-3523-SMT-TR
SMD-25℃~+85℃ 12V 19mm 1A 3.5mm Headphone Jack 5mm 9mm Black Brass、Copper alloy Silver Surface Mount TRS SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)SJ-3524-SMT-TR-PI
--25℃~+85℃ 12V 1A Brass、Copper alloy Silver - Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.mdTympan Rev E Hardware v2.0.0
Repository for Tympan Rev E v2 Electronics and case designs. This version of the Rev E is based on the Teensy 4.1 by PJRC and incorporates the Teensy 4.1 into our own design, as we did with the Tympan Rev D. Checkout the v1 branch for the previous daughter card version of this project.
Check Back For Updates
Update
This project is also on Circuit Hub
Click HERE to view this project on Circuit Hub
Push of 5/13/21 Added breakout of the Program pin to an Tympan board pushbutton. Location of Pushbutton is between the IN OUT at the TOP of the board.

Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C11, C15, C16, C23, C24 |
| 8 | 33R | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 7 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6, C8, C10, C13, C17, C18, C25 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C12, C19, C20, C21, C22, C26 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R11, R21, R22 |
| 4 | 4K7 | Resistor_SMD:R_0402_1005Metric | R29, R30, R32, R33 |
| 4 | CONN_01X06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | P1, P2, P3, P4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R23, R24, R31 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C7, C9, C14 |
| 3 | 470R | Resistor_SMD:R_0402_1005Metric | R26, R27, R28 |
| 3 | CONN_01X01 | MountingHole:MountingHole_3mm | P6, P7, P8 |
| 3 | DNP | Resistor_SMD:R_0603_1608Metric | R2, R16, R17 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R15, R18 |
| 2 | 240R | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | Conn_01x24 | Pin_Headers:Pin_Header_Straight_1x24_Pitch2.54mm_SMD_Pin1Left | J5, J6 |
| 2 | LED | Capacitor_SMD:C_1206_3216Metric | D2, D3 |
| 2 | SPM0687LR5H-1 | Tympan:SPM0687LR5H-1 | MIC1, MIC2 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 2.2K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 4UCON-20519 | Solutions:4UCON-0217-20519 | BT2 |
| 1 | 74LVC1G66 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | APHB1608SGNC | Tympan:ABHB1608S | D1 |
| 1 | BC127 | Tympan:BC127 | IC1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3001_1x12mm | BT1 |
| 1 | CL-SB-22A | Tympan:CL-SB-22A | SW1 |
| 1 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.00mm | J3 |
| 1 | FUSE | Capacitor_SMD:C_1206_3216Metric | F1 |
| 1 | LC709203 | Tympan:WDFN8_3X4mm_0.65P | U6 |
| 1 | LOGO | Solutions:Tympan_LOGO | G*** |
| 1 | LOGO | Solutions:oshwa-logo-gear | G*** |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Led_RGB_CA | Solutions:CLMVB-FKA-CFHEHLCBB7a363 | D4 |
| 1 | MCP73831 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | POT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | Qwiik Connector | Connectors_JST:JST_SH_SM04B-SRSS-TB_04x1.00mm_Angled | J4 |
| 1 | SJ-3523-SMT-TR | Tympan:SJ-3523-SMT-TR | J1 |
| 1 | SJ-3524-SMT-TR-PI | Tympan:SJ-3524-SMT-TR | J2 |
| 1 | SW_Push | Tympan:MJTP1117 | SW2 |
| 1 | TLV320AIC3206IRSBT | Package_DFN_QFN:UQFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm | U2 |
| 1 | Teensy4.1 | teensy:Teensy41_SMT | U5 |
Similar boards
- 4 layers38 × 74 mm

- 4 layers38 × 74 mm

- 4 layers38 × 46 mm

- 4 layers38.5 × 97.6 mm

- 4 layers38 × 40 mm

Tympan AIC Shield
Tympan/Tympan_AIC_Shield
Add a CODEC to your Tympan with this daughter card!
51 parts2MIT - 4 layers38 × 40 mm

- 4 layers38 × 40 mm

Tympan Earpiece Shield
Tympan/Tympan_Earpiece_Shield
Shield for Tympan Rev D that supports Tympan BTE Hardware
49 parts - 2 layers58.8 × 55.7 mm

A1s mini
martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth
86 parts24MIT
Questions
How big is the Tympan Rev E PCB?
It measures 38 × 74 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tympan Rev E use?
93 parts, built around the TEENSY 4.1, TLV320AIC3206IRSBT, 74LVC1G66GW and LP5907MFX-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tympan Rev E KiCad files?
From the Tympan/Tympan_Rev_E_Hardware repository on GitHub, at the commit this page was made from: the board is Tympan_Rev_E/Tympan_Rev_E.kicad_pcb and its schematic Tympan_Rev_E/Tympan_Rev_E.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tympan Rev E design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).