

Auren shield
Auren Hearing Probe Hardware
- Size
- 38 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 62
- Pads
- 187
- Tracks, vias
- 443, 61
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Aug 2025
- Updated
- 20 Oct 2025
Overview
Auren shield is an open-source printed circuit board by Tympan, from the Tympan/auren-hardware repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 38 × 40 mm with 50 parts on 62 nets, routed with 443 tracks and 61 vias.
It is built around the TLV320AIC3206IRSBT and 74LVC1G66GW. Its parts include 18 resistors, 16 capacitors, 12 connectors and 2 ICs. It belongs with the sensors and measurement boards of this library.
Main components
2TLV320AIC3206IRSBT
WQFN-40(5x5)-40℃~+85℃ 1.5V~5.5V 48kHz Encoder/decoder I2C、SPI WQFN-40(5x5) Audio Interface ICs ROHSTexas InstrumentsAudio Interface ICs74LVC1G66GW
SOT-353-40℃~+125℃ 1.65V~5.5V 11pF 155MHz 1:1 4.2ns 5.3ns 600ps 6Ω SOT-353 Analog Switches, Multiplexers ROHSNexperiaAnalog Switches, Multiplexers
README
README.mdAuren Hardware Repository
Hardware designs for the Auren Hearing Test Hardware.
The production files for the Fall 2025 prototype production run of 12 units. Photos of the Probe below, Pics of the Shield will follow.

Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 33R | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R7, R9, R10, R11, R18 |
| 6 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C7, C10, C12, C13 |
| 6 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C2, C8, C23, C24, C25, C26 |
| 6 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P1, P2, P3, P4, P5, P6 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4, C6, C11 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 4K7 | Resistor_SMD:R_0402_1005Metric | R1, R8 |
| 2 | Conn_01x01 | MountingHole:MountingHole_3.2mm_M3 | J5, J6 |
| 2 | DNP | Resistor_SMD:R_0603_1608Metric | R14, R17 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 74LVC1G66 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | HDMI_A_Molex_208658-1001 | Connector_Video:HDMI_A_Molex_208658-1001_Horizontal | J3 |
| 1 | Headphone Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LOGO | Graphics:Tympan_LOGO | G*** |
| 1 | LOGO | Graphics:oshwa-logo-gear | G*** |
| 1 | MIC In | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | TLV320AIC3206IRSBT | Housings_DFN_QFN:UQFN-40-1EP_5x5mm_Pitch0.4mm | U2 |
More from Tympan/auren-hardware
1- 2 layers24.4 × 22.2 mm

Similar boards
- 4 layers38 × 74 mm

Tympan Rev E
Tympan/Tympan_Rev_E_Hardware
Repository for Tympan Rev E Electronics and case designs
93 parts14MIT - 4 layers38 × 74 mm

- 4 layers38 × 74 mm

- 4 layers38 × 40 mm

Tympan AIC Shield
Tympan/Tympan_AIC_Shield
Add a CODEC to your Tympan with this daughter card!
51 parts2MIT - 4 layers38 × 40 mm

Tympan Earpiece Shield
Tympan/Tympan_Earpiece_Shield
Shield for Tympan Rev D that supports Tympan BTE Hardware
49 parts - 4 layers38.5 × 97.6 mm

- 4 layers38 × 46 mm

- 2 layers77 × 97 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
76 parts1kGPL-3.0
Questions
How big is the Auren shield PCB?
It measures 38 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Auren shield use?
50 parts, built around the TLV320AIC3206IRSBT and 74LVC1G66GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Auren shield KiCad files?
From the Tympan/auren-hardware repository on GitHub, at the commit this page was made from: the board is auren-shield/auren-shield.kicad_pcb and its schematic auren-probe/auren-probe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Auren shield design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).