
Tympan Rev E
Tympan/Tympan_Rev_E_Hardware
Repository for Tympan Rev E Electronics and case designs

Repository for the board files for Tympan Rev C
Tympan C is an open-source printed circuit board by Tympan, from the Tympan/Tympan_Rev_C_Hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 38.5 × 97.6 mm with 82 parts on 113 nets, routed with 618 tracks and 102 vias.
It is built around the TLV320AIC3206IRSBT, LP5907MFX-1.8 and MCP73831, with the SPH1642HT5H-1, CL-SB-22A-01 and SJ-3523-SMT-TR among its other parts. Its parts include 26 capacitors, 24 resistors, 13 connectors, 5 diodes and 4 ICs.
Repository for the board files for Tympan Rev C
These design files were made with KiCAD PCB capture software. The custom component files for parts used in this design are located in the repo as well. Everything should render correctly in the Schematic and the PCB. If not, you may need to adjust the library paths.
This work is based on work done by Creare and their team in Spring of 2017. Modifications have been made to their Rev A hardware design to overcome bugs and improve the design.
The Teensy 3.6 from PJRC is the 'brain' that drives our audio board. In order to make the Tympan and the Teensy live happily together, you will need to modify the Teensy board as shown.

The change allows us to use the VUSB (5V) to charge the LiIon battery with circuitry on the Tympan. That's it! Follow the getting started guide for the Teensy, and then you will be up and running with our Tympan Library for Arduino!
The Tympan Case is 3D printed, and the design files can be found here There is also a Bill of Materials that will list the screws and threaded inserts that we used.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitors_SMD:C_0402 | C1, C3, C5, C7, C10, C12, C13, C14, C16, C18 |
| 10 | 33 | Resistors_SMD:R_0201_NoSilk | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 8 | 2.2uF | Capacitors_SMD:C_0402 | C2, C8, C17, C19, C23, C24, C25, C26 |
| 5 | 10uF | Capacitors_SMD:C_0402 | C4, C6, C11, C15, C21 |
| 5 | 220 | Resistors_SMD:R_0402 | R1, R18, R21, R22, R23 |
| 5 | CONN_02X01 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P7, P8, P9, P10, P11 |
| 5 | LED | Capacitors_SMD:C_1206 | D1, D2, D3, D4, D5 |
| 4 | 0 | Capacitors_SMD:C_0603 | R12, R13, R15, R16 |
| 3 | 1uF | Capacitors_SMD:C_0402 | C9, C20, C22 |
| 3 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | P5, TP1, TP2 |
| 2 | 1K | Resistors_SMD:R_0402 | R19, R20 |
| 2 | CONN_01X24 | Pin_Headers:Pin_Header_Straight_1x24_Pitch2.54mm | P4, P6 |
| 2 | DNP | Capacitors_SMD:C_0603 | R14, R17 |
| 2 | SPH1642HT5H-1 | Tympan:SPH1642HT5H | MIC1, MIC2 |
| 1 | 2K | Resistors_SMD:R_0402 | R24 |
| 1 | CL-SB-22A | Tympan:CL-SB-22A | SW1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P2 |
| 1 | FUSE | Capacitors_SMD:C_1206 | F1 |
| 1 | LP5907MFX-1.8 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | LiPo | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | BT1 |
| 1 | MCP73831 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | POT | Tympan:Bourns_3386F | RV1 |
| 1 | RN42 | RF_Modules:RN42 | U1 |
| 1 | SJ-3523-SMT-TR | Tympan:SJ-3523-SMT-TR | J1 |
| 1 | SJ-3524-SMT-TR-PI | Tympan:SJ-3524-SMT-TR | J2 |
| 1 | TLV320AIC3206IRSBT | Housings_DFN_QFN:UQFN-40-1EP_5x5mm_Pitch0.4mm | U2 |
The 78 most common of 82 parts.

Tympan/Tympan_Rev_E_Hardware
Repository for Tympan Rev E Electronics and case designs




Tympan/Tympan_AIC_Shield
Add a CODEC to your Tympan with this daughter card!

martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth


Tympan/Tympan_Earpiece_Shield
Shield for Tympan Rev D that supports Tympan BTE Hardware
It measures 38.5 × 97.6 mm and has 4 copper layers, 1.6 mm thick.
82 parts, built around the TLV320AIC3206IRSBT, LP5907MFX-1.8, MCP73831 and SPH1642HT5H-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tympan/Tympan_Rev_C_Hardware repository on GitHub, at the commit this page was made from: the board is Tympan_C.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).