2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108
2 layers90.2 × 36.8 mm
esp8266 mains switch
- Size
- 90.2 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 23
- Pads
- 76
- Tracks, vias
- 202, 16
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Oct 2015
- Updated
- 12 Oct 2015
Overview
ESP is an open-source printed circuit board by TurBoss, from the TurBoss/ESP-MAINS-SWITCH repository on GitHub. It is a 2-layer board of 90.2 × 36.8 mm with 25 parts on 23 nets, routed with 202 tracks and 16 vias.
It is built around the MOC3041M. Its parts include 12 resistors, 6 connectors, 4 ICs, 1 capacitor and 1 diode.
Main components
1Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R4, R5, R6, R7 |
| 1 | - + | Connect:bornier2 | P2 |
| 1 | 0.1 400V | Capacitors_ThroughHole:C_Rect_L18_W7_P15 | C1 |
| 1 | 100 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R8 |
| 1 | 100 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R12 |
| 1 | 10K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R3 |
| 1 | 390 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R10 |
| 1 | 470 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R11 |
| 1 | 4N35 | Sockets_DIP:DIP-6__300_ELL | U1 |
| 1 | 68 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R9 |
| 1 | BT808 | Transistors_TO-220:TO-220_Neutral123_Vertical_LargePads | U4 |
| 1 | BTN | Connect:bornier2 | P1 |
| 1 | CONN | Connect:bornier2 | P5 |
| 1 | ESP-13-WROOM-02 | ESP8266:ESP-13-WROOM-02 | U2 |
| 1 | FUSE | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | LAMP | Connect:bornier2 | P4 |
| 1 | LED | LEDs:LED-3MM | D1 |
| 1 | MOC3041M | Sockets_DIP:DIP-6__300_ELL | U3 |
| 1 | PROG | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | RX TX G | Pin_Headers:Pin_Header_Straight_1x03 | P6 |
Questions
How big is the ESP PCB?
It measures 90.2 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP use?
25 parts, built around the MOC3041M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP KiCad files?
From the TurBoss/ESP-MAINS-SWITCH repository on GitHub, at the commit this page was made from: the board is ESP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP design in my own project?
Its repository states no licence, so its author keeps all rights: ask TurBoss before reusing the design.
Similar boards
- 2 layers50.8 × 50.8 mm
- 2 layers90 × 100 mm
Olivia control
AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.
51 parts4LGPL-2.1 - 2 layers100 × 74 mm
Qym solder
basson/qym-solder
QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.
135 parts4GPL-3.0 - 2 layers68.6 × 73.7 mm
Lm324 soldering station
JanoVel/lm324_soldering_station
The KiCad project of the lm324 soldering station described in this post: http://electronics.vlzqz.com/analog-closed-loop-controlled-soldering-station.html
40 parts4MIT - 2 layers51.9 × 52 mm
- 2 layers148 × 61 mm
- 2 layers100 × 100 mm
Splitflap berlin
julianschick/fallblatt-schematics-ep2
Fallblattanzeige der S-Bahn Berlin (Leiterplattenlayout)
64 parts2MIT