2 layers42 × 67 mm
2 layers187.8 × 140.3 mm
Nitingale pcb
Tsuiha/Nitingale_verLIT230keys lowprofile left hand keyboard gaming device
- Size
- 187.8 × 140.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 56
- Pads
- 244
- Tracks, vias
- 419, 19
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Mar 2024
- Updated
- 24 Mar 2024
Overview
Nitingale pcb is an open-source printed circuit board by Tsuiha, from the Tsuiha/Nitingale_verLIT repository on GitHub. It is a 2-layer board of 187.8 × 140.3 mm with 58 parts on 56 nets, routed with 419 tracks and 19 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 31 switches, 15 capacitors, 6 resistors, 3 ICs and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
readme.mdNitingale ver.LIT 30keys left hand keyboard, gaming device, macropad rp2040 qmk keyboard
Contact Twitter : @TsuihaJP E-mail : contact@tsuiha.com
build guide : https://tsuiha.com/nitingale_lit_buildguide/ describe : https://tsuiha.com/nitingale_verlit/
In addition to the pcb, an M2 x 2 mm screw, an M2 x 5 mm spacer and a gateron lowprofile 2.0 switch are required
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | SW_PUSH | mylib:GLP2-nitingale | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14 |
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C4, C6, C7, C9, C10, C11, C12, C13, C14 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C3, C5, C15 |
| 2 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R3 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C8 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R2, R4 |
| 2 | 5.1k | Capacitor_SMD:C_0402_1005Metric | R6, R7 |
| 1 | Crystal_GND2 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | NCP1117-1.5_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | Polyfuse | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW31 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the Nitingale pcb PCB?
It measures 187.8 × 140.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nitingale pcb use?
58 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nitingale pcb KiCad files?
From the Tsuiha/Nitingale_verLIT repository on GitHub, at the commit this page was made from: the board is kicad_data/nitingale_pcb/nitingale_pcb.kicad_pcb and its schematic kicad_data/nitingale_pcb/nitingale_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nitingale pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tsuiha before reusing the design.