

Hypjolin panel
Cross-modulating ultra-chaos generator
- Size
- 200 × 151.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 60
- Pads
- 224
- Tracks, vias
- 425, 43
- Pours
- 220
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Aug 2022
- Updated
- 21 Jul 2023
Overview
Hypjolin panel is an open-source printed circuit board by triglav-modular, from the triglav-modular/Hypjolin repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 200 × 151.7 mm with 61 parts on 60 nets, routed with 425 tracks and 43 vias.
It is built around the 1N4148W. Its parts include 29 connectors, 6 diodes, 2 switches and 1 resistor.
Main components
1README
README.mdHypjolin
The Hypjolin is a cross-modulating ultra-chaos generator device which combines Rob Hordijk’s Benjolin and Ian Fritz’s Hypster circuits.
By merging the Benjolin’s stepped chaos with the Hypster’s smooth, fluctuating chaos, the Hypjolin produces remarkably unpredictable, yet controllable sonic outcomes.
The integration of these two systems is facilitated through a banana jack patchbay, with blue banana jacks representing Benjolin outputs and purple ones denoting Hypster outputs. The black jacks serve as inputs. The patch bay is spaced for use with shorting bars.

Mouser Cart: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=39b2feea56
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Triglav:MusicThingModular-9MM_SNAP-IN_POT | FREQ_A1, FREQ_B1, FREQ_CV_A1, FREQ_CV_B1, FREQ_CV_F1, FREQ_F1, LOOP_OFFSET1, RESONANCE1, RUNGLER_A1, RUNGLER_B1, RUNGLER_FILTER1 |
| 8 | 100k | Triglav:MusicThingModular-9MM_SNAP-IN_POT | damp_mod1, damp1, fine1, gain_mod1, gain1, rate_mod1, rate1, shape1 |
| 2 | 1N4148W | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D30, D31 |
| 2 | SUBMINI_SPDT | Connector_Triglav:1082MS1T1B1M2QEEVX | SW1, SW2 |
| 1 | 47k* | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | CONN_1_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J39 |
| 1 | CONN_2_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J35 |
| 1 | CONN_3_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J40 |
| 1 | CONN_4_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J31 |
| 1 | CONN_5_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J33 |
| 1 | CONN_6_P | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J37 |
| 1 | LED_Dual_Bidirectional_U | LED_THT:LED_D3.0mm_Clear | D27 |
| 1 | LED_Dual_Bidirectional_X | LED_THT:LED_D3.0mm_Clear | D32 |
| 1 | LED_Dual_Bidirectional_Y | LED_THT:LED_D3.0mm_Clear | D29 |
| 1 | LED_Dual_Bidirectional_Z | LED_THT:LED_D3.0mm_Clear | D28 |
| 1 | LOGO | LOGO | G*** |
| 1 | damp_mod | Connector_B:Banana_Jack_1Pin | J25 |
| 1 | ext_in | Connector_B:Banana_Jack_1Pin | J3 |
| 1 | freq_cv_in_a | Connector_B:Banana_Jack_1Pin | J1 |
| 1 | freq_cv_in_b | Connector_B:Banana_Jack_1Pin | J2 |
| 1 | freq_cv_in_filter | Connector_B:Banana_Jack_1Pin | J12 |
| 1 | gain_mod | Connector_B:Banana_Jack_1Pin | J23 |
| 1 | out -U | Connector_B:Banana_Jack_1Pin | J15 |
| 1 | out -X | Connector_B:Banana_Jack_1Pin | J21 |
| 1 | out -Y | Connector_B:Banana_Jack_1Pin | J20 |
| 1 | out -Z | Connector_B:Banana_Jack_1Pin | J18 |
| 1 | out U | Connector_B:Banana_Jack_1Pin | J16 |
| 1 | out X | Connector_B:Banana_Jack_1Pin | J22 |
| 1 | out Y | Connector_B:Banana_Jack_1Pin | J19 |
| 1 | out Z | Connector_B:Banana_Jack_1Pin | J17 |
| 1 | out_amp | Connector_B:Banana_Jack_1Pin | J8 |
| 1 | p1 | Connector_B:Banana_Jack_1Pin | J7 |
| 1 | p2 | Connector_B:Banana_Jack_1Pin | J4 |
| 1 | pwm | Connector_B:Banana_Jack_1Pin | J9 |
| 1 | rate_mod | Connector_B:Banana_Jack_1Pin | J24 |
| 1 | run_cv | Connector_B:Banana_Jack_1Pin | J10 |
| 1 | t1 | Connector_B:Banana_Jack_1Pin | J5 |
| 1 | t2 | Connector_B:Banana_Jack_1Pin | J6 |
| 1 | xor | Connector_B:Banana_Jack_1Pin | J11 |
The 58 most common of 61 parts.
More from triglav-modular/Hypjolin
2- 2 layers200.4 × 251.2 mm

- 2 layers200 × 75.1 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm

- 4 layers95.6 × 73.6 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm

- 2 layers99.1 × 90.7 mm

Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm

Questions
How big is the Hypjolin panel PCB?
It measures 200 × 151.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hypjolin panel use?
61 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hypjolin panel KiCad files?
From the triglav-modular/Hypjolin repository on GitHub, at the commit this page was made from: the board is hypjolin-panel.kicad_pcb and its schematic hypjolin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hypjolin panel design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).