Skip to the content
4 layers14 × 32.7 mmTwisted, the printed circuit board in 3D

The key chain sized expandable ESP32-S3 platform.

Size
14 × 32.7 mm
Copper layers
4
Thickness
1.2 mm
Parts
54
Nets
87
Pads
250
Tracks, vias
664, 119
Pours
146
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Aug 2026
Updated
8 Oct 2026

Overview

Twisted is an open-source printed circuit board by Triax-Labs, from the Triax-Labs/twisted repository on GitHub. It is a 4-layer board of 14 × 32.7 mm with 54 parts on 87 nets, routed with 664 tracks and 119 vias.

It is built around the ESP32-S3FH4R2, BQ25628RYKR and FXL6408UMX, with the H5VU25UC, KH-1.27FH-2X10P-H4.3-SMT and LW5233N11E among its other parts. Its parts include 20 capacitors, 7 switches, 6 ICs, 4 resistors and 2 inductors. It belongs with the audio and music and radio and wireless boards and the ESP32 boards of this library.

Main components

12

README

README.md

logo

Twisted

Twisted is a tiny (14x32mm to be precise) ESP32-S3 based platform, which has dual Xtensa LX7 cores, 4Mb of flash, 2Mb of PSRAM, 512Kb of SRAM as well as BLE and WiFi on board, paired with an 0.42" IPS LCD, a keypad, a Neopixel and built-in battery management with USB OTG.

pcb layer by layer view

There is one more thing, the platform is extendable! It features a 20 pin 1.27mm expansion header which allows you of attaching other boards that add extra features, giving Twisted a reason for its name.

We currently have three expansion boards for Twisted...

Twisted Listen

An audio codec based on ES8316, which provides a high performance DAC and ADC, the attachment comes with both a builtin microphone and amplifier for a loudspeaker, as well as a 3.5mm headphone jack (with microphone in.)

pcb layer by layer view

Twisted Connect

A shield for the Twisted Bus that provides the functionality of an extra microcontroller, it adds on a CH585 MCU which comes with an interesting set of peripherals, NFC/RFID (with support for reading, writing and emulating tags,) both a USB High Speed and a USB Full Speed controller as well as a BLE / 2.4GHz modem.

Twisted Connect could be used for using the peripherals on the CH585 MCU alongside the ESP32-S3 on the main Twisted board or it could be used to deep sleep the ESP32-S3 to preserve power, since Twisted Connect could take over the bus, it can wake up the ESP32-S3 when a trigger happens (e.g. sensors over I2C or a BLE/USB packet.)

pcb layer by layer view

Twisted Sense (WIP)

An attachment that provides a a suite of sensors and trackers (pressure, temperature, humidity, gyroscope, accelerometer, magnetometer and GPS/GNSS) aiming to help the device "feel" what happens around it.

Production

Production could be done through JLCPCB's PCBA service.

Total (estimated) costs for Twisted boards (does not include any of the extra shields):

ItemPriceQtyWhere
PCB$75 BoardsJLCPCB
PCBA$1005 BoardsJLCPCB

You will need to assemble one side of the board, the other side which has the display, a resistor and the keypad you will have to assemble it yourself, or let JLCPCB assemble it for you at a higher cost.

You will need the display to be sourced and assembled by yourself, this is where you can buy it:

If you decide to buy the display from a different supplier, make sure it comes with a 16 pin flex cable, it also has to follow this pinout:

Total (estimated) costs for Twisted Listen boards:

ItemPriceQtyWhere
PCB$75 BoardsJLCPCB
PCBA$605 BoardsJLCPCB

Total (estimated) costs for a Twisted Connect boards:

ItemPriceQtyWhere
PCB$75 BoardsJLCPCB
PCBA$805 BoardsJLCPCB

Note that these tables don't include shipping charges.

Production files could be found in /hardware/X/production.

GPIO Pins Mapping (Twisted Bus)

GPIOStrapADCHWSPIRemarkExposedOn Twisted
0YesPull LOW to Enter BOOTNoBoot Button
1NoADC1 CH0YesExpansion Header
2NoADC1 CH1YesExpansion Header
3YesADC1 CH2Pull LOW to Use An External Debugger Instead of USBYesExpansion Header
4NoADC1 CH3YesExpansion Header
5NoADC1 CH4YesExpansion Header
6NoADC1 CH5YesExpansion Header
7NoADC1 CH6YesExpansion Header
8NoADC1 CH7YesExpansion Header
9NoADC1 CH8HoldYesExpansion Header
10NoADC1 CH9CSYesExpansion Header
11NoADC2 CH0MOSIYesExpansion Header
12NoADC2 CH1SCKYesExpansion Header
13NoADC2 CH2MISOYesExpansion Header
14NoADC2 CH3WPYesExpansion Header
15NoADC2 CH4YesExpansion Header
16NoADC2 CH5YesExpansion Header
17NoADC2 CH6YesExpansion Header
18NoADC2 CH7NoKeypad: INT
19YesADC2 CH8USB D-YesUSB Port
20YesADC2 CH9USB D+YesUSB Port
21NoNoNeopixel: DIN
26YesUsed for QSPI Flash/PSRAMNoUnused
27YesUsed for QSPI Flash/PSRAMNoUnused
28YesUsed for QSPI Flash/PSRAMNoUnused
29YesUsed for QSPI Flash/PSRAMNoUnused
30YesUsed for QSPI Flash/PSRAMNoUnused
31YesUsed for QSPI Flash/PSRAMNoUnused
32YesUsed for QSPI Flash/PSRAMNoUnused
33MaybeStraps for Chips w/ Octal-SPI PSRAMNoLCD: RST
34MaybeStraps for Chips w/ Octal-SPI PSRAMNoLCD: SCK
35MaybeStraps for Chips w/ Octal-SPI PSRAMNoLCD: CS
36MaybeStraps for Chips w/ Octal-SPI PSRAMNoLCD: MOSI
37MaybeStraps for Chips w/ Octal-SPI PSRAMNoLCD: BKL
38NoNoUnused
39NoNoKeypad: RST
40NoNoUnused
41NoThrough TestpointInternal I2C: SDA
42NoThrough TestpointInternal I2C: SDA
43NoDefault UART: TXThrough TestpointUnused
44NoDefault UART: RXThrough TestpointUnused
45YesNoUnused
46YesNoUnused
47NoNoLCD: DC
48NoNoBMS: INT

Parts

54
QtyValueFootprintReferences
8CL05A475MP5NRNClcsc:C0402C1, C2, C4, C5, C7, C8, C9, C10
7TS-1088-AR02016lcsc:SW-SMD_L3.9-W3.0-P4.45SW1, SW2, SW3, SW4, SW5, SW6, SW7
6CL05B104KO5NNNClcsc:C0402C3, C13, C14, C15, C17, C18
20402WGF5601TCElcsc:R0402R1, R2
2CL05A105KA5NQNClcsc:C0402C12, C16
2CL05C100JB5NNNClcsc:C0402C10, C11
10402WGF1001TCElcsc:R0402R4
10402WGF499JTCElcsc:R0402R5
1APH160808C1R0MX02lcsc:L0603L1
1BAT_STATlcsc:TinyTestPointTP1
1BQ25628RYKRlcsc:WQFN-18_L3.0-W2.5-P0.40-TLU1
1CC0402KRX7R7BB104lcsc:C0402C19
1CL10B473KB8NNNClcsc:C0603C6
1DY-S1515065/RGBC/6805-5Tlcsc:LED-SMD_4P-L1.5-W1.5LED2
1ESP32-S3FH4R2lcsc:QFN-56_L7.0-W7.0-P0.40-BL-EP5.7U6
1FXL6408UMXlcsc:UQFN-16_L2.6-W1.8-P0.40-BLU5
1GNDlcsc:2xTinyTestPointTP10
1H5VU25UClcsc:DFN2510-10_L2.5-W1.0-P0.50-BLU2
1KH-1.27FH-2X10P-H4.3-SMTlcsc:CONN-SMD_20P-P1.27_KINGHELM_KH-1.27FH-2X10P-H4.3-SMTU3
1KH-3216-A27lcsc:ANT-SMD_L3.2-W1.6L2
1LW5233N11Elcsc:DFN-4_L1.0-W1.0-P0.65-BL-EPU4
1RESETlcsc:2xTinyTestPointTP4
1SCLlcsc:TinyTestPointTP3
1SDAlcsc:TinyTestPointTP2
1SX16Y040000B71T001lcsc:CRYSTAL-SMD_4P-L1.6-W1.2-BLX1
1TYPE-C-31-M-12lcsc:USB-C_SMD-TYPE-C-31-M-12_1USBC1
1UART_RXlcsc:2xTinyTestPointTP6
1UART_TXlcsc:2xTinyTestPointTP5
1USB_D+lcsc:2xTinyTestPointTP7
1USB_D-lcsc:2xTinyTestPointTP8
1VBUSlcsc:2xTinyTestPointTP9
1battery connectorlcsc:PinSocket_1x02_P1.27mm_VerticalJ1
1~lcsc:0.42-ST7735-BentLCD1

More from Triax-Labs/twisted

2
  • 4 layers14 × 32.7 mmTwisted Listen Rev2, the printed circuit board in 3D

    Twisted Listen Rev2

    Triax-Labs/twisted

    The key chain sized expandable ESP32-S3 platform.

    56 parts7
  • 4 layers30.2 × 32.7 mmTwisted Connect, the printed circuit board in 3D

    Twisted Connect

    Triax-Labs/twisted

    The key chain sized expandable ESP32-S3 platform.

    46 parts7

Similar boards

  • 4 layers50 × 69.5 mmRia, the printed circuit board in 3D

    Ria

    B44ken/ria

    ria is a small wheeled biped built for jumping and fast ground motion.

    107 parts
  • 4 layers83.8 × 22.9 mmRemex wch, the printed circuit board in 3D

    Remex wch

    ArcaneNibble/remex-wch

    CH32V307 GigE development board

    102 parts10BSD
  • 4 layers62.9 × 88.3 mmAirgradient go main, the printed circuit board in 3D

    Airgradient go main

    Open-Air-Foundation/pcb-go

    AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an…

    194 parts1CC-BY-SA-4.0
  • 4 layers43.2 × 17.8 mmGeekble Nano ESP32S3, the printed circuit board in 3D

    Geekble Nano ESP32S3

    SooDragon/Geekble-nano-ESP32S3

    Geekble nano ESP32S3

    94 parts6CC0-1.0
  • 4 layers100 × 70 mmData port x4, the printed circuit board in 3D

    Data port x4

    kartben/hw-testing-rack

    3D-printed, tilted test shelf for 16 dev boards: sliding drawers, per-bay ESP32-S3 running Zephyr (USB/IP, power switching, metering), KiCad PCBs, OpenSCAD parts, BOM and an interactive 3D viewer

    290 parts
  • 4 layers70 × 50 mmMotor power poc, the printed circuit board in 3D

    Motor power poc

    Galacs/motor-power-poc

    A POC PCB to test circuit electrical protections and motor control schemes

    165 parts
  • 4 layers29 × 42 mmRollxoxo shim, the printed circuit board in 3D

    Rollxoxo shim

    Galacs/rollxoxo-shim

    Shim pcb to allow remote control of rollxio garage door via wifi or bluetooth

    72 parts
  • 2 layers42 × 32 mmRAMS - PCB, the printed circuit board in 3D

    RAMS - PCB

    JanClyde05/Road-Accident-Monitoring-System

    This directory contains the planning, specification, and initial KiCad project for RAMS Wearable PCB Revision C. Do not fabricate from this directory yet -- manual schematic wiring and DRC verification are still needed.

    68 parts1

Questions

How big is the Twisted PCB?

It measures 14 × 32.7 mm and has 4 copper layers, 1.2 mm thick.

What parts does the Twisted use?

54 parts, built around the ESP32-S3FH4R2, BQ25628RYKR, FXL6408UMX and H5VU25UC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Twisted KiCad files?

From the Triax-Labs/twisted repository on GitHub, at the commit this page was made from: the board is hardware/twisted/Twisted.kicad_pcb and its schematic hardware/twisted-connect/Twisted-Connect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Twisted design in my own project?

Its repository states no licence, so its author keeps all rights: ask Triax-Labs before reusing the design.