

CpuPrint
- Size
- 40.6 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 76
- Pads
- 230
- Tracks, vias
- 632, 152
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Oct 2024
- Updated
- 24 Nov 2024
Overview
CpuPrint is an open-source printed circuit board by tpotechnix, from the tpotechnix/TraktorAllrad repository on GitHub. It is a 2-layer board of 40.6 × 30.5 mm with 62 parts on 76 nets, routed with 632 tracks and 152 vias.
It is built around the ESP32-S3-WROOM-1-N8 and BTS5030-1EJA. Its parts include 41 resistors, 13 capacitors, 3 ICs, 2 transistors and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
2ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBTS5030-1EJA
DSO-8-EP-40℃~+150℃ 1 30mΩ 5A 5V~28V Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection DSO-8-EP Power Distribution Switches ROHSInfineon TechnologiesPower Distribution Switches
README
README.mdTraktorAllrad
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 680 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R14, R15, R16, R21, R22, R23, R24, R25, R26, R27, R28, R29, R33, R34, R35 +7 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8, R9, R10, R11, R30 |
| 5 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R17, R18, R19, R20 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C7, C10 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C11, C12, C13 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C9 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 100u/6,3V | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C2, C6 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32 |
| 2 | BC818 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | BTS5030-1EJA | TPO_LIB:Infineon_PG-DSO-8-43_tpo | U3 |
| 1 | Conn_02x16_Odd_Even | Connector_EDGE:ConnEdge_2x16_2.54mm | J1 |
| 1 | ESP32-S3-WROOM-1 | TPO_LIB:ESP32-S3-WROOM-1_tpo | U1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | PROG_DBG | Connector_Molex:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J2 |
More from tpotechnix/TraktorAllrad
2- 2 layers40.6 × 12.7 mm

- 2 layers8.4 × 14.6 mm

Similar boards
- 2 layers41 × 79.3 mm

LiControl
doppelhub/MuddersMIMA
Mudders Take on Manual IMA Control in the G1 Honda Insight
84 parts5GPL-3.0 - 2 layers109.1 × 100.1 mm

Sterownik DC
lologog/RowSeederController
This project is a row seeder controller featuring DC motor control and CAN communication for efficient and precise seeding operations
134 partsMIT - 2 layers85 × 115 mm

OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers299 × 82.5 mm

PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 4 layers56.5 × 99.8 mm

BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers129.5 × 50.8 mm

- 4 layers84.5 × 129.5 mm

- 2 layers110 × 115 mm

Esp32 keyboard v0.1
hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1
230 parts168GPL-3.0
Questions
How big is the CpuPrint PCB?
It measures 40.6 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CpuPrint use?
62 parts, built around the ESP32-S3-WROOM-1-N8 and BTS5030-1EJA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CpuPrint KiCad files?
From the tpotechnix/TraktorAllrad repository on GitHub, at the commit this page was made from: the board is hardware/CpuPrint/CpuPrint.kicad_pcb and its schematic hardware/ConnPrint/ConnPrint.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CpuPrint design in my own project?
Its repository states no licence, so its author keeps all rights: ask tpotechnix before reusing the design.