2 layers116.8 × 61 mm
2 layers129.5 × 50.8 mm
Lilka
lilka-dev/lilka234Схема та документація ігрової консолі Lilka
- Size
- 129.5 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 49
- Pads
- 204
- Tracks, vias
- 338, 33
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Feb 2024
- Updated
- 20 Oct 2026
Overview
Lilka is an open-source printed circuit board by lilka-dev, from the lilka-dev/lilka repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 129.5 × 50.8 mm with 39 parts on 49 nets, routed with 338 tracks and 33 vias.
It is built around the ESP32-S3-WROOM-1-N8, IRLML6401 and TP4056. Its parts include 12 switches, 6 connectors, 4 resistors, 3 capacitors and 3 ICs. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
IRLML6401
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 125pF 12V 15nC@5V 180pF 4.3A 830pF 85mΩ@1.8V 950mV P-Channel SOT-23 MOSFETs ROHSKEXINMOSFETs
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdЛілка
DIY-консоль, яку можна зібрати з дешевих готових модулів.
Де її можна купити?
Всі посилання та інструкції доступні ось тут!
Демо
Новини про проєкт Лілка V2:
Перша версія Лілки:
Документація
Повна документація проєкту буде доступна ось тут: https://docs.lilka.dev
Спільнота
Приєднуйтесь до нашого сервера в Discord!
Я хочу допомогти писати код!
Ми будемо тільки раді! Є декілька варіантів:
- Хочете написати гру, програму, документацію чи щось таке? Звісно! Документація є тут (C++) і тут (Lua).
- Хочете допомогти з вдосконаленням коду? Виконайте команду
make todo- вона відобразить всі TODO з коду, де потрібна допомога. - Хочете допомогти ідейно? Знайшли баг або маєте ідею щодо покращення архітектури? Створіть новий тікет або пишіть в наш Discord в форум
#лілка.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 10uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | A | Buttons:SW_PUSH-12mm-fixed-min | SW5 |
| 1 | AudioJack | Connectors:JackSocketTRS_PJ3013D | J6 |
| 1 | B | Buttons:SW_PUSH-12mm-fixed-min | SW6 |
| 1 | Buzzer | footprints:Buzzer_Wide | BZ1 |
| 1 | C | Buttons:SW_PUSH-12mm-fixed-min | SW7 |
| 1 | D | Buttons:SW_PUSH-12mm-fixed-min | SW8 |
| 1 | Down | Buttons:SW_PUSH-12mm-fixed-min | SW2 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | Ext | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | G*** | kibuzzard-65B2D7AF | kibuzzard-65B2D7AF |
| 1 | IRLML6401 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Left | Buttons:SW_PUSH-12mm-fixed-min | SW3 |
| 1 | NoBat | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Power | Button_Switch_THT:SW_E-Switch_EG1271_SPDT | SW11 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW12 |
| 1 | Right | Buttons:SW_PUSH-12mm-fixed-min | SW4 |
| 1 | Select | Button_Switch_THT:SW_PUSH_6mm | SW9 |
| 1 | Start | Button_Switch_THT:SW_PUSH_6mm | SW10 |
| 1 | TLV1117LV33 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | TP4056 | Connectors:Charge_Controller_TP4056_4pin | J4 |
| 1 | Up | Buttons:SW_PUSH-12mm-fixed-min | SW1 |
| 1 | uSD | footprints:MicroSD-Adapter-3v3 | J3 |
| 1 | ~ | Connectors:USB_2.0_PCB | J1 |
| 1 | ~ | footprints:MAX98357-I2S-Module | J5 |
| 1 | ~ | Display:TFT_240x280_2pads | U2 |
More from lilka-dev/lilka
1Similar boards
- 2 layers35 × 26.8 mm
Definitely not a fire hazard
seidenstrasse/capsules
3D printable models and schematics for capsule bodies and electronics
34 parts2MIT - 4 layers310.5 × 21.4 mm
- 2 layers39 × 19.2 mm
- 4 layers60.8 × 64.8 mm
- 4 layers53.2 × 138.8 mm
- 4 layers259.1 × 13.5 mm
- 4 layers115.5 × 14.4 mm
- 4 layers88.2 × 61.4 mm
Questions
How big is the Lilka PCB?
It measures 129.5 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lilka use?
39 parts, built around the ESP32-S3-WROOM-1-N8, IRLML6401 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lilka KiCad files?
From the lilka-dev/lilka repository on GitHub, at the commit this page was made from: the board is hardware/v2/main.kicad_pcb and its schematic hardware/v1/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lilka design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).