

AeroBlinker
Custom PCB w/ KiCAD that reads Receiver Signals to control light flash patterns - Aeronautics Team
- Size
- 38.3 × 26.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 37
- Pads
- 123
- Tracks, vias
- 251, 53
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Oct 2026
- Updated
- 6 Nov 2026
Overview
AeroBlinker is an open-source printed circuit board by toyJig, from the toyJig/AeroBlinker repository on GitHub. It is a 2-layer board of 38.3 × 26.8 mm with 42 parts on 37 nets, routed with 251 tracks and 53 vias.
It is built around the STM32F042F6P6, MP3362GJ and USBLC6-2SC6, with the XC6206P332MR-G and B5819W SL among its other parts. Its parts include 9 capacitors, 9 resistors, 6 connectors, 4 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
5STM32F042F6P6
TSSOP-20(4.4x6.5)-40℃~+85℃ 1.65V~3.6V 12bit 16 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH TSSOP-20(4.4x6.5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MP3362GJ
TSOT23-8TSOT23-8 New Arrivals ROHSMonolithic Power SystemsUncategorisedUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)XC6206P332MR-G
UncategorisedUnknown makerB5819W SL
SOD-1231A 40V 600mV@1A 9A Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
README
README.mdAeroBlinker
Custom PCB w/ KiCAD that reads Receiver Signals to control light flash patterns - Aeronautics Team.
Read JOURNAL.md for the logged process!
| Features: |
|---|
| A small STM32F042F6P6 MCU that decodes PWM frequencies to control a MOSFET |
| USB-C flashing and a LDO regulator for the USB-C VBUS (the STM can't handle 5V) |
| An on-board 3.3v Buck Convertor to step down efficiently from 1S or 2S Voltages |
| Connectors to connect up to 3 LEDs with (Can wire more in series if needed) |
View the PCB Here!:
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C4, C6 |
| 3 | B5819W_SL | Diode_SMD:D_SOD-123 | D3, D4, D5 |
| 3 | LED_GND | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 0.56 | Resistor_SMD:R_0402_1005Metric | R7, R10 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C10 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C8 |
| 2 | 5K1 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 3.3u | Custom_footprt_sch_and_models:IND-SMD_L4.0-W4.0_0.47UH04209.5A | L2 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 40K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 75K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BATT | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MP3362GJ | Package_TO_SOT_SMD:TSOT-23-8 | U6 |
| 1 | RECEIVER | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | STM32F042F6P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SW_Push | Custom_footprt_sch_and_models:SW-SMD_L3.9-W3.0-P4.45 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | XC6206P332MR-G | Package_TO_SOT_SMD:SOT-23-3 | U5 |
Similar boards
- 2 layers

- 4 layers30 × 28 mm

Rebot ctrl
Matheus3007/pcb-lab
PCBs designed entirely as code: Python circuits + KiCad 10 + Freerouting, checked, rendered and ordered assembled from JLCPCB
58 partsMIT - 4 layers60.8 × 61.3 mm

- 2 layers20 × 38.5 mm

Arm tiny pcb
Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.
29 partsCERN-OHL-S-2.0 - 2 layers100 × 130 mm

Pride Badge prototype
aziraphale/pride-badge-v1
🌈⚡Pride badge PCB with LEDs, STM32, and 3D printed diffuser+case!
92 parts - 4 layers122 × 40 mm

Implant detector
KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).
65 parts - 2 layers107.5 × 49.1 mm

AN EIGHT CHANNEL
laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management
28 parts - 4 layers18 × 51 mm

Questions
How big is the AeroBlinker PCB?
It measures 38.3 × 26.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AeroBlinker use?
42 parts, built around the STM32F042F6P6, MP3362GJ, USBLC6-2SC6 and XC6206P332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AeroBlinker KiCad files?
From the toyJig/AeroBlinker repository on GitHub, at the commit this page was made from: the board is AeroBlinker.kicad_pcb and its schematic AeroBlinker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AeroBlinker design in my own project?
Its repository states no licence, so its author keeps all rights: ask toyJig before reusing the design.