
Arm tiny pcb
Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.

All the hardware needed to build your own OS3M Mouse!
OS3M Mouse is an open-source printed circuit board by spoter368, from the spoter368/os3m-hardware repository on GitHub. It is a 4-layer board of 60.8 × 61.3 mm with 51 parts on 44 nets, routed with 524 tracks and 65 vias.
It is built around the STM32F042F6P6, AP2112K-3.3 and USBLC6-2SC6. Its parts include 22 capacitors, 8 resistors, 6 inductors, 5 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Here are all the files pertaining to the OS3M mouse's PCB. I only commit and push here when I have a full revision update to the PCB. So far there are only 2 revisions, 0 and 1, and you should only make the current one (1). Gerbers can be found in the os3m-gerbers folder, and can be sent to JLC for easy fab. I also plan on selling these on tindie at some point.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1n | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C19, C20 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6, C14, C16, C18 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R7 |
| 6 | PCB_COIL | PCB_Coil:COIL_GENERATOR_0 | L1, L2, L3, L4, L5, L6 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5, C17 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C12, C13, C21 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C11, C22 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BLUE_LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | DBG_HDR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | EXP_HDR | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Horizontal | J3 |
| 1 | LDC1612 | Package_SON:WSON-12-1EP_4x4mm_P0.5mm_EP2.6x3mm_ThermalVias | U4 |
| 1 | LDC1614 | Package_DFN_QFN:WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U2 |
| 1 | STM32F042F6P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | XTAL_40MHz | Oscillator:Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm | X1 |

Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.

toyJig/AeroBlinker
Custom PCB w/ KiCAD that reads Receiver Signals to control light flash patterns - Aeronautics Team

aziraphale/pride-badge-v1
🌈⚡Pride badge PCB with LEDs, STM32, and 3D printed diffuser+case!

KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).

laforestlabs/KiCraft
KiCad PCB automation toolkit — placement, routing, scoring, and experiment management

PetteriAimonen/relaymux
Hardware and firmware for a USB connected relay box

abstractfoundry/lumicube-boards
PCB and firmware design files for some of the LumiCube components

ckemere/usb-imu
USB IMU for camera rigs: BNO055 module (STM32F042) and an FE1.1S hub carrier with JST-GH camera ports. KiCad 9.
It measures 60.8 × 61.3 mm and has 4 copper layers, 4.69 mm thick.
51 parts, built around the STM32F042F6P6, AP2112K-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the spoter368/os3m-hardware repository on GitHub, at the commit this page was made from: the board is PCB/OS3M_Mouse.kicad_pcb and its schematic PCB/OS3M_Mouse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask spoter368 before reusing the design.