2 layers139.7 × 101.6 mm
Isa monster fdc
skiselev/monster-fdc
ISA floppy disk controller card that supports up to 8 floppy drives
57 parts78
4 layers101.6 × 54.6 mm
Rc duino
TomPlano/AVRC-2560Project for interfacing Atmega2560 to the rcbus
- Size
- 101.6 × 54.6 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 35
- Nets
- 141
- Pads
- 462
- Tracks, vias
- 878, 94
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Jan 2024
- Updated
- 31 Oct 2024
Overview
Rc duino is an open-source printed circuit board by TomPlano, from the TomPlano/AVRC-2560 repository on GitHub. It is a 4-layer board of 101.6 × 54.6 mm with 35 parts on 141 nets, routed with 878 tracks and 94 vias.
It is built around the 74HCT595D and 74HCT688D. Its parts include 11 capacitors, 11 connectors, 5 ICs, 2 resistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdAVRC-2560
Project for interfacing Atmega2560 to the rcbus
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | .1uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C8, C9, C11, C13 |
| 3 | Conn_01x08_Male | Connector_IDC:IDC-Header_2x04_P2.54mm_Horizontal | J4, J5, J6 |
| 2 | 20pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C5, C6 |
| 2 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J13, J14 |
| 1 | .1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 16Mhz Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 74HCT595D | lib-rc-duino:74HCT595D | U3 |
| 1 | 74HCT688 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U5 |
| 1 | ATMEGA2560-16AUR | lib-rc-duino:ATMEGA2560-16AUR | U2 |
| 1 | AVRC-Logo | lib-rc-duino:avrc_2560 | H1 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | 47uf1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_IDC:IDC-Header_2x04_P2.54mm_Horizontal | J10 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J8 |
| 1 | D | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | RCBus | lib-rc-duino:RCBus | U1 |
| 1 | RCBus Logo | lib-rc-duino:RCBUS | H2 |
| 1 | SN74LVC1G374DCKR | lib-rc-duino:SN74LVC1G374DCKR | U4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | Reset |
| 1 | proto_area_power_gnd | lib-rc-duino:protoarea | J7 |
Questions
How big is the Rc duino PCB?
It measures 101.6 × 54.6 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Rc duino use?
35 parts, built around the 74HCT595D and 74HCT688D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rc duino KiCad files?
From the TomPlano/AVRC-2560 repository on GitHub, at the commit this page was made from: the board is kicad_proj/rc-duino.kicad_pcb and its schematic kicad_proj/rc-duino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rc duino design in my own project?
Its repository states no licence, so its author keeps all rights: ask TomPlano before reusing the design.
Similar boards
- 2 layers176.5 × 85.1 mm
- 2 layers100 × 50 mm
Rc2014-ds1302-rtc
electrified/rc2014-ds1302-rtc
DS1302 Real Time Clock for the RC2014 computer
34 parts25 - 2 layers76.2 × 134.1 mm
Multiplier board
michaelkamprath/minimal-64x4-expansion-cards
A set of expansion boards for the Minimal 64x4 Home Computer
80 parts19 - 4 layers63.5 × 102.6 mm
Card
sam-falvo/VDC-II
An open source Video Display Controller following in the footsteps, but not a clone, of the Commodore 8568 VDC chip.
21 parts17MPL-2.0 - 4 layers65.4 × 111.6 mm
- 2 layers100 × 50 mm
Rc2014-ym2151
electrified/rc2014-ym2151
Yamaha's DX21, DX27 and DX100 synthesisers used a derivative IC which is very similar.
33 parts9 - 2 layers188 × 102.9 mm
RC200-Dev Backplane
MarkD833/RCBUS-68xxx
My Motorola 68000 & 68302 processors (+ SIO, PIO & MFP boards) for the RCBus ecosystem.
102 parts8GPL-3.0