Skip to the content
12345678910111213141516

74HCT595D

NexperiaExtended

-40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHS

Part id
nexperia/74HCT595D
Category
Shift Registers
Package
SOIC-16
Pins
16
In stock
10,205 at JLCPCB (C282339)
Used on
74 open-source boards

Overview

The 74HCT595D is a shift Register made by Nexperia in a SOIC-16 package with 16 pins. -40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHS.

PCBKit's library has its KiCad symbol (74xx:74HCT595, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 10,205 are in stock at JLCPCB (part C282339). 74 open-source boards in 51 repositories on GitHub use it.

Symbol

1QB2QC3QD4QE5QF6QG7QH8GND9QH'10SRCLR11SRCLK12RCLK13OE14SER15QA16VCC
74xx:74HCT595From KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

From the datasheet

8
Supply, least
4.5 V · VCC, recommended operating min · p. 7
Supply, most
5.5 V · VCC, recommended operating max · p. 7
Supply, absolute maximum
7 V · VCC, absolute max · p. 6
Works from
-40 °C · Ambient temperature min · p. 7
Works up to
125 °C · Ambient temperature max · p. 7
Takes working
160 µA · VCC supply current max, inputs at rails, IO = 0 A, VCC = 5.5 V, -40 °C to +125 °C · p. 9
A pin gives at most
25 mA · Q7S source or sink absolute max · p. 6
A pin gives at most
35 mA · Qn source or sink absolute max per pin · p. 6

What it is and has

8
Serial input
8-bit · p. 1
Output
8-bit serial or parallel · p. 1
Storage register
3-state outputs · p. 1
Shift register
Direct clear · p. 1
Input levels
TTL · p. 1
Latch-up performance
Exceeds 100 mA per JESD 78 Class II Level B · p. 1
ESD protection
HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V · p. 1
ESD protection
CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V · p. 1

Specifications

81
ParameterConditionsAs printedPage
supply voltage VCCVoltages referenced to GNDmin -0.5 · max 7 V6
input clamping current IIKVI < -0.5 V or VI > VCC + 0.5 V; ± maximummax 20 mA6
output clamping current IOKVO < -0.5 V or VO > VCC + 0.5 V; ± maximummax 20 mA6
output current IOVO = -0.5 V to (VCC + 0.5 V); pin Q7S; ± maximummax 25 mA6
output current IOVO = -0.5 V to (VCC + 0.5 V); pins Qn; ± maximummax 35 mA6
supply current ICCmax 70 mA6
ground current IGNDmin -70 mA6
storage temperature Tstgmin -65 · max 150 °C6
total power dissipation Ptot74HCT595D; SOT109-1max 500 mW6
supply voltage VCC74HCT595min 4.5 · typ 5 · max 5.5 V7
input voltage VI74HCT595; maximum VCCmin 0 V7
output voltage VO74HCT595; maximum VCCmin 0 V7
input transition rise and fall rate Δt/ΔV74HCT595; VCC = 4.5 Vtyp 1.67 · max 139 ns/V7
ambient temperature Tamb74HCT595min -40 · typ 25 · max 125 °C7
HIGH-level input voltage VIH74HCT595; VCC = 4.5 V to 5.5 V; -40 °C to +85 °Cmin 2 · typ 1.6 V8
HIGH-level input voltage VIH74HCT595; VCC = 4.5 V to 5.5 V; -40 °C to +125 °Cmin 2 V8
LOW-level input voltage VIL74HCT595; VCC = 4.5 V to 5.5 V; -40 °C to +85 °Ctyp 1.2 · max 0.8 V8
LOW-level input voltage VIL74HCT595; VCC = 4.5 V to 5.5 V; -40 °C to +125 °Cmax 0.8 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; all outputs; IO = -20 uA; -40 °C to +85 °Cmin 4.4 · typ 4.5 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; all outputs; IO = -20 uA; -40 °C to +125 °Cmin 4.4 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; Q7S output; IO = -4 mA; -40 °C to +85 °Cmin 3.84 · typ 4.32 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; Q7S output; IO = -4 mA; -40 °C to +125 °Cmin 3.7 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; Qn bus driver outputs; IO = -6 mA; -40 °C to +85 °Cmin 3.7 · typ 4.32 V8
HIGH-level output voltage VOH74HCT595; VI = VIH or VIL; VCC = 4.5 V; Qn bus driver outputs; IO = -6 mA; -40 °C to +125 °Cmin 3.7 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; all outputs; IO = 20 uA; -40 °C to +85 °Ctyp 0 · max 0.1 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; all outputs; IO = 20 uA; -40 °C to +125 °Cmax 0.1 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; Q7S output; IO = 4.0 mA; -40 °C to +85 °Ctyp 0.15 · max 0.33 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; Q7S output; IO = 4.0 mA; -40 °C to +125 °Cmax 0.4 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; Qn bus driver outputs; IO = 6.0 mA; -40 °C to +85 °Ctyp 0.16 · max 0.33 V8
LOW-level output voltage VOL74HCT595; VI = VIH or VIL; VCC = 4.5 V; Qn bus driver outputs; IO = 6.0 mA; -40 °C to +125 °Cmax 0.4 V8
input leakage current II74HCT595; VI = VCC or GND; VCC = 5.5 V; -40 °C to +85 °C; ± maximummax 1 uA9
input leakage current II74HCT595; VI = VCC or GND; VCC = 5.5 V; -40 °C to +125 °C; ± maximummax 1 uA9
OFF-state output current IOZ74HCT595; VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND; -40 °C to +85 °C; ± maximummax 5 uA9
OFF-state output current IOZ74HCT595; VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND; -40 °C to +125 °C; ± maximummax 10 uA9
supply current ICC74HCT595; VI = VCC or GND; IO = 0 A; VCC = 5.5 V; -40 °C to +85 °Cmax 80 uA9
supply current ICC74HCT595; VI = VCC or GND; IO = 0 A; VCC = 5.5 V; -40 °C to +125 °Cmax 160 uA9
additional supply current ΔICC74HCT595; per input pin MR, SHCP, STCP, OE; other inputs at VCC or GND; IO = 0 A; VI = VCC - 2.1 V; VCC = 4.5 V to 5.5 V; -40 °C to +85 °Ctyp 150 · max 675 uA9
additional supply current ΔICC74HCT595; per input pin MR, SHCP, STCP, OE; other inputs at VCC or GND; IO = 0 A; VI = VCC - 2.1 V; VCC = 4.5 V to 5.5 V; -40 °C to +125 °Cmax 735 uA9
additional supply current ΔICC74HCT595; pin DS; other inputs at VCC or GND; IO = 0 A; VI = VCC - 2.1 V; VCC = 4.5 V to 5.5 V; -40 °C to +85 °Ctyp 25 · max 113 uA9
additional supply current ΔICC74HCT595; pin DS; other inputs at VCC or GND; IO = 0 A; VI = VCC - 2.1 V; VCC = 4.5 V to 5.5 V; -40 °C to +125 °Cmax 123 uA9
input capacitance CI74HCT595; -40 °C to +85 °Ctyp 3.5 pF9
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; SHCP to Q7S; 25 °Ctyp 25 · max 42 ns11
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; SHCP to Q7S; -40 °C to +85 °Cmax 53 ns11
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; SHCP to Q7S; -40 °C to +125 °Cmax 63 ns11
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; STCP to Qn; 25 °Ctyp 24 · max 40 ns11
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; STCP to Qn; -40 °C to +85 °Cmax 50 ns11
propagation delay tpd74HCT595; VCC = 4.5 V to 5.5 V; STCP to Qn; -40 °C to +125 °Cmax 60 ns11
HIGH to LOW propagation delay tPHL74HCT595; VCC = 4.5 V to 5.5 V; MR to Q7S; 25 °Ctyp 23 · max 40 ns11
HIGH to LOW propagation delay tPHL74HCT595; VCC = 4.5 V to 5.5 V; MR to Q7S; -40 °C to +85 °Cmax 50 ns11
HIGH to LOW propagation delay tPHL74HCT595; VCC = 4.5 V to 5.5 V; MR to Q7S; -40 °C to +125 °Cmax 60 ns11
enable time ten74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; 25 °Ctyp 21 · max 35 ns11
enable time ten74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; -40 °C to +85 °Cmax 44 ns11
enable time ten74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; -40 °C to +125 °Cmax 53 ns11
disable time tdis74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; 25 °Ctyp 18 · max 30 ns11
disable time tdis74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; -40 °C to +85 °Cmax 38 ns11
disable time tdis74HCT595; VCC = 4.5 V to 5.5 V; OE to Qn; -40 °C to +125 °Cmax 45 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; SHCP HIGH or LOW; 25 °Cmin 16 · typ 6 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; SHCP HIGH or LOW; -40 °C to +85 °Cmin 20 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; SHCP HIGH or LOW; -40 °C to +125 °Cmin 24 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; STCP HIGH or LOW; 25 °Cmin 16 · typ 5 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; STCP HIGH or LOW; -40 °C to +85 °Cmin 20 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; STCP HIGH or LOW; -40 °C to +125 °Cmin 24 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; MR LOW; 25 °Cmin 20 · typ 8 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; MR LOW; -40 °C to +85 °Cmin 25 ns11
pulse width tW74HCT595; VCC = 4.5 V to 5.5 V; MR LOW; -40 °C to +125 °Cmin 30 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; 25 °Cmin 16 · typ 5 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; -40 °C to +85 °Cmin 20 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; -40 °C to +125 °Cmin 24 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; SHCP to STCP; 25 °Cmin 16 · typ 8 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; SHCP to STCP; -40 °C to +85 °Cmin 20 ns11
set-up time tsu74HCT595; VCC = 4.5 V to 5.5 V; SHCP to STCP; -40 °C to +125 °Cmin 24 ns11
hold time th74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; 25 °Cmin 3 · typ -2 ns11
hold time th74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; -40 °C to +85 °Cmin 3 ns11
hold time th74HCT595; VCC = 4.5 V to 5.5 V; DS to SHCP; -40 °C to +125 °Cmin 3 ns11
recovery time trec74HCT595; VCC = 4.5 V to 5.5 V; MR to SHCP; 25 °Cmin 10 · typ -7 ns11
recovery time trec74HCT595; VCC = 4.5 V to 5.5 V; MR to SHCP; -40 °C to +85 °Cmin 13 ns11
recovery time trec74HCT595; VCC = 4.5 V to 5.5 V; MR to SHCP; -40 °C to +125 °Cmin 15 ns11
maximum frequency fmax74HCT595; VCC = 4.5 V to 5.5 V; SHCP and STCP; 25 °Cmin 30 · typ 52 MHz11
maximum frequency fmax74HCT595; VCC = 4.5 V to 5.5 V; SHCP and STCP; -40 °C to +85 °Cmin 24 MHz11
maximum frequency fmax74HCT595; VCC = 4.5 V to 5.5 V; SHCP and STCP; -40 °C to +125 °Cmin 20 MHz11
power dissipation capacitance CPD74HCT595; VCC = 4.5 V to 5.5 V; fi = 1 MHz; VI = GND to VCC - 1.5 V; all 9 outputs switching; 25 °Ctyp 130 pF11

Pins, by the datasheet

16
1 Q1
Parallel data output. · p. 5
2 Q2
Parallel data output. · p. 5
3 Q3
Parallel data output. · p. 5
4 Q4
Parallel data output. · p. 5
5 Q5
Parallel data output. · p. 5
6 Q6
Parallel data output. · p. 5
7 Q7
Parallel data output. · p. 5
8 GND
Ground (0 V). · p. 5
9 Q7S
Serial data output. · p. 5
10 MR
Master reset (active LOW). · p. 5
11 SHCP
Shift register clock input. · p. 5
12 STCP
Storage register clock input. · p. 5
13 OE
Output enable input (active LOW). · p. 5
14 DS
Serial data input. · p. 5
15 Q0
Parallel data output 0. · p. 5
16 VCC
Supply voltage. · p. 5

Ordering codes, by the datasheet

1
74HCT595D
SO16 · TTL input levels; -40 °C to +125 °C; 16 leads; SOT109-1 · p. 2

Open-source boards using it

74See all 74
  • 2 layers92 × 94.5 mmPicoCNC, the printed circuit board in 3D

    PicoCNC

    phil-barrett/PicoCNC

    Raspberry Pi Pico based grblHAL Controller

    152 parts173
  • 2 layers116.8 × 73.7 mmDuPal V3, the printed circuit board in 3D

    DuPal V3

    DuPAL-PAL-DUmper/DuPAL_Board

    This repository contains the KiCad files and the gerber files for the DuPAL boards.

    133 parts57CC-BY-SA-4.0
  • 2 layers102 × 102 mmMRR ESPE, the printed circuit board in 3D

    MRR ESPE

    maplerainresearch/MRR_ESPE

    MRR ESPE 3D printer control board

    168 parts39
  • 2 layers209.1 × 126.6 mmTH XWhatsIt, the printed circuit board in 3D

    TH XWhatsIt

    listofoptions/TH-XWhatsIt

    through hole implementation of the capsense controllers by XWhatsIt

    60 parts21
  • 2 layers70 × 65 mmFluepdot, the printed circuit board in 3D

    Fluepdot

    Fluepke/Fluepdot

    Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe

    116 parts17AGPL-3.0
  • 2 layers199.4 × 50.8 mmNixie board, the printed circuit board in 3D

    Nixie board

    vascofazza/cloxie_nixie_clock

    Schematics and code for Cloxie: my Nixie Tube Clock.

    85 parts17GPL-3.0
  • 2 layers90.6 × 77.8 mmEmurom, the printed circuit board in 3D

    Emurom

    jtsiomb/emurom

    ROM emulator. Accepts ROM images through USB and acts as a parallel ROM chip.

    58 parts15CC-BY-SA-4.0
  • 2 layers94.9 × 94.7 mmGate, the printed circuit board in 3D

    Gate

    CountMurphy/DoorwayToHeaven

    A gate to other worlds

    141 parts13MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74HCT595D?

Yes. The symbol is 74xx:74HCT595 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74HCT595D?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the 74HCT595D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74HCT595D?

JLCPCB lists it as part C282339, with 10,205 in stock; the sellers' links on this page open their listings.

What can replace the 74HCT595D?

Parts like it in the library: the GN595D by GN Semic, the MC74HCT595AD by onsemi, the MM74HC595MX by onsemi and the XL74HC595 by XINLUDA. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74HCT595D?

74 boards in 51 repositories on GitHub; the most starred are listed on this page, with their KiCad files.