
BeamshipPlugboard
listofoptions/TH-XWhatsIt
through hole implementation of the capsense controllers by XWhatsIt

through hole implementation of the capsense controllers by XWhatsIt
TH XWhatsIt is an open-source printed circuit board by listofoptions, from the listofoptions/TH-XWhatsIt repository on GitHub. It is a 2-layer board of 209.1 × 126.6 mm with 60 parts on 176 nets, routed with 1,509 tracks and 1,574 vias.
It is built around the 74HCT595D and LM339. Its parts include 17 connectors, 16 resistors, 7 capacitors and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

through hole implementation of the capsense controllers by XWhatsIt (Tom Wong-Cornell). original liscencure holds, as well as CERN OSH (compatible license).
original implementation of Tom Wong-Cornell's controller documented here
http://downloads.cornall.co/ibm-capsense-usb-web/ibm-capsense-usb.html
component documentation is supplied, working theory of operation is under the previous link.
Please read the following files:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7, R8, R9, R10, R11, R12, R13 |
| 7 | 0U1 | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4, C5, C7, C8, C9, C10 |
| 4 | Solderable ground strap | TH-XWhatsIt:ChassisGnd | H6, H7, H8, H9 |
| 3 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14, R15, R16 |
| 3 | 74HCT595 | Package_DIP:DIP-16_W7.62mm | U3, U5, U8 |
| 3 | Grounded hole for M3 standoff | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H3, H4 |
| 2 | 100K | Resistor_THT:R_Array_SIP5 | RN1, RN3 |
| 2 | 20K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4 |
| 2 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R5 |
| 2 | LM339 | Package_DIP:DIP-14_W7.62mm | U1, U6 |
| 2 | MODEL F PLUGBOARD CONNECTOR | TH-XWhatsIt:Model_F_3.96mm_pitch_footprint | J14, J16 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | BEAMSPRING PLUGBOARD COLUMNS | Connector_PinSocket_2.54mm:PinSocket_1x27_P2.54mm_Vertical | J6 |
| 1 | BEAMSPRING PLUGBOARD CONNECTOR | TH-XWhatsIt:beamspring_connector_footprint | J7 |
| 1 | BEAMSPRING PLUGBOARD ROWS | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J8 |
| 1 | Beamspring Mounting Hole | TH-XWhatsIt:BeamSpringGroundingMountingHoleForTHOnly | H5 |
| 1 | COLUMNS | Connector_PinHeader_2.54mm:PinHeader_1x27_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | TH-XWhatsIt:PadsToShort | J13 |
| 1 | Conn_01x30 | TH-XWhatsIt:Displaywriter_with_mountinghole_footprint | J15 |
| 1 | Conn_01x30 | TH-XWhatsIt:displaywriter-connector_v3 | J10 |
| 1 | DISPLAYWRITER PLUGBOARD COLUMNS | Connector_PinSocket_2.54mm:PinSocket_1x27_P2.54mm_Vertical | J9 |
| 1 | DISPLAYWRITER PLUGBOARD ROWS | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J11 |
| 1 | EXPANSION HEADER | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | Left Mountinghole | TH-XWhatsIt:ModelF_new_mounting_hole_left | H10 |
| 1 | Locklights | TH-XWhatsIt:FAT_LockLightsConnector | J17 |
| 1 | MCP4921-EP | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | MODEL F PLUGBOARD COLUMNS | Connector_PinSocket_2.54mm:PinSocket_1x27_P2.54mm_Vertical | J3 |
| 1 | MODEL F PLUGBOARD CONNECTOR | Connector_PinHeader_2.54mm:PinHeader_1x30_P2.54mm_Vertical | J4 |
| 1 | MODEL F PLUGBOARD ROWS | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J5 |
| 1 | Net-Tie_3 | TH-XWhatsIt:NetTie-3_THT_Pad1.0mm_mod_thicker | NT2 |
| 1 | ProMicro | promicro:ProMicro | U7 |
| 1 | ROWS | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | Right Mountinghole | TH-XWhatsIt:ModelF_new_mounting_hole_right | H11 |

listofoptions/TH-XWhatsIt
through hole implementation of the capsense controllers by XWhatsIt

listofoptions/TH-XWhatsIt
through hole implementation of the capsense controllers by XWhatsIt


DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.


Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe

vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.

jtsiomb/emurom
ROM emulator. Accepts ROM images through USB and acts as a parallel ROM chip.


It measures 209.1 × 126.6 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the 74HCT595D and LM339. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the listofoptions/TH-XWhatsIt repository on GitHub, at the commit this page was made from: the board is TH-XWhatsIt/TH-XWhatsIt.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask listofoptions before reusing the design.