

TFT8K3548FPC A1-E
- Size
- 49.4 × 89.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 39
- Pads
- 116
- Tracks, vias
- 288, 28
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 May 2019
- Updated
- 3 Feb 2021
Overview
TFT8K3548FPC A1-E is an open-source printed circuit board by todo-assert, from the todo-assert/project.pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.4 × 89.2 mm with 25 parts on 39 nets, routed with 288 tracks and 28 vias.
It is built around the AMS1117-3.3 and GP2302. Its parts include 6 resistors, 5 capacitors, 2 connectors, 1 IC and 1 transistor.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsGP2302
SOT-23-55℃~+150℃ 1 N-channel 1.2V 2.1A 20V 260pF 27pF 350mW 48pF 5nC@4.5V 60mΩ@2.5V SOT-23 MOSFETs ROHSGPMOSFETs
README
README.mdproject.pcb
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R6 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | TP8, TP9 |
| 1 | +3.3V | TestPoint:TestPoint_Pad_2.5x2.5mm | TP6 |
| 1 | +5V | TestPoint:TestPoint_Pad_2.5x2.5mm | TP5 |
| 1 | 0.1uF/25F | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 22R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5 |
| 1 | GND | TestPoint:TestPoint_Pad_2.5x2.5mm | TP7 |
| 1 | GP2302 | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | LCD_I8080_CONNECTOR_16x2 | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J2 |
| 1 | LCD_ID | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | LEDA | TestPoint:TestPoint_Pad_2.5x2.5mm | TP3 |
| 1 | LEDK | TestPoint:TestPoint_Pad_2.5x2.5mm | TP4 |
| 1 | LOGO | logo:monggoyun2 | +1 |
| 1 | TE | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | TFT8K3548FPC-A1-E | qconnectors:TFT8K3548FPC-A1-E | J1 |
More from todo-assert/project.pcb
7- 2 layers48.3 × 78.7 mm

- 2 layers92 × 84 mm

- 2 layers117.4 × 103.6 mm

- 2 layers99.4 × 89.2 mm

- 2 layers45 × 84 mm

- 2 layers58 × 103.6 mm

- 2 layers58 × 104.6 mm

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the TFT8K3548FPC A1-E PCB?
It measures 49.4 × 89.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TFT8K3548FPC A1-E use?
25 parts, built around the AMS1117-3.3 and GP2302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TFT8K3548FPC A1-E KiCad files?
From the todo-assert/project.pcb repository on GitHub, at the commit this page was made from: the board is KiCAD/TFT8K3548FPC-A1-E/TFT8K3548FPC-A1-E/TFT8K3548FPC-A1-E.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TFT8K3548FPC A1-E design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).