Skip to the content
2 layers172.7 × 44.4 mmEight by, the printed circuit board in 3D

An 8-knob + 8 buttons + eight RGB LEDs board, all controllable with only 8 pins

Size
172.7 × 44.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
32
Pads
170
Tracks, vias
271, 33
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 May 2024
Updated
16 Jun 2025

Overview

Eight by is an open-source printed circuit board by todbot, from the todbot/eight_by repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 172.7 × 44.4 mm with 42 parts on 32 nets, routed with 271 tracks and 33 vias.

It is built around the 74HC4051 and WS2812B. Its parts include 10 capacitors, 8 diodes, 8 switches, 2 ICs and 1 resistor.

Main components

2

README

README.md

eight_by

An 8-knob + 8 buttons + eight RGB LEDs board,
all controllable with only 8 pins

Pot options:

  • 9mm Song Hui trimmer pots B10K - synthcube
  • Just about any other 9mm pot

Buttons are:

  • 12mm tact (LCSC C561260)

Parts

42
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C5, C6, C7, C8, C9, C10
8R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK09K_Single_VerticalRV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8
8SW_Push_45degButton_Switch_THT:SW_PUSH_6mm_H7.3mmSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
8WS2812BLED_SMD:LED_WS2812B-Mini_PLCC4_3.5x3.5mmLED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
274HC4051Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1, U2
110kResistor_SMD:R_0603_1608MetricR1
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1

More from todbot/eight_by

1
  • 2 layers198.9 × 48.4 mmEight by qtpy, the printed circuit board in 3D

    Eight by qtpy

    todbot/eight_by

    An 8-knob + 8 buttons + eight RGB LEDs board, all controllable with only 8 pins

    53 partsGPL-3.0

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers85.6 × 88.9 mmOM Landroid MB, the printed circuit board in 3D

    OM Landroid MB

    rich21044/Openmower-for-Landroid-WR141E

    Taking the hardware developed as part of ClemensElfleins work on Openmower and adapting it to fit a 2019 Landroid WR141E.

    126 parts8GPL-3.0
  • 2 layers240 × 239.9 mmKiCad chessLab, the printed circuit board in 3D

    KiCad chessLab

    dev-campusfab/chessLab

    Interactive Chess board that brings visuals to the game and can help the player to learn.

    295 parts2AGPL-3.0
  • 4 layers90 × 77.9 mmLighting Tile Circuit V3, the printed circuit board in 3D

    Lighting Tile Circuit V3

    OA-Designs/LED-TILE

    Modular decorative LED tiles in multiple shapes (hex, square, triangle...) sharing one PCB design. Tiles connect edge-to-edge to share power and sync lighting effects across a network.

    77 partsGPL-3.0
  • 4 layers136 × 95 mmGamepad PCB, the printed circuit board in 3D

    Gamepad PCB

    pacman314159/Multipurpose_ESP32_Gamepad

    140 parts
  • 2 layersMain pcb, the printed circuit board in 3D

    Main pcb

    PMheiilsDev/midi_test

    58 parts
  • 2 layers66 × 81 mmKabeltester v2, the printed circuit board in 3D

    Kabeltester v2

    luhbots/luhsoccer_electronics

    The eletronics projects of our robots and basestation.

    67 parts2
  • 2 layers180 × 170 mmOpenMowerMainboard, the printed circuit board in 3D

    OpenMowerMainboard

    kitspace-test-repos/kicad6-file-collection

    168 partsMIT

Questions

How big is the Eight by PCB?

It measures 172.7 × 44.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Eight by use?

42 parts, built around the 74HC4051 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eight by KiCad files?

From the todbot/eight_by repository on GitHub, at the commit this page was made from: the board is schematics/eight_by/eight_by.kicad_pcb and its schematic schematics/eight_by/eight_by.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eight by design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).