2 layers53.2 × 49.3 mm
2 layers115.1 × 71.6 mm
H10 Controller
tlsystems/H10-Controller1- Size
- 115.1 × 71.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 71
- Pads
- 169
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 8 Jan 2018
- Updated
- 8 Jan 2018
Overview
H10 Controller is an open-source printed circuit board by tlsystems, from the tlsystems/H10-Controller repository on GitHub. It is a 2-layer board of 115.1 × 71.6 mm with 25 parts on 71 nets.
It is built around the MAX3232ID, 74HCT04D and 74HCT165D, with the 74HCT595D among its other parts. Its parts include 9 capacitors, 5 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
74HCT04D
SO-14-40℃~+125℃ 1 19ns@4.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SO-14 Inverters ROHSNexperiaInverters74HCT165D
SOIC-16-40℃~+125℃ 1 34ns@4.5V,50pF 4.5V~5.5V 44MHz 500mW 74HCT 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers74HCT595D
SOIC-16-40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift Registers
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | H10 Controller:C_0805 | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 6 | mounting_hole_4-40 | H10 Controller:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4, MH5, MH6 |
| 1 | 74HCT04 | H10 Controller:TSSOP-14_4.4x5mm_Pitch0.65mm | U4 |
| 1 | 74HCT165 | H10 Controller:SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
| 1 | 74HCT595 | H10 Controller:SOIC-16_3.9x9.9mm_Pitch1.27mm | U3 |
| 1 | ArduinoNano | H10 Controller:ArduinoNano | U1 |
| 1 | CONN_01X05 | H10 Controller:Pin_Header_Straight_1x05_Pitch2.54mm | J4 |
| 1 | CONN_02X05 | H10 Controller:Pin_Header_Straight_2x05_Pitch2.54mm | J3 |
| 1 | CONN_02X05 | H10 Controller:Pin_Header_Straight_2x05_Pitch2.00mm | J2 |
| 1 | CONN_02X13 | H10 Controller:Pin_Header_Straight_2x13_Pitch2.54mm | J1 |
| 1 | JumperBlock_2-Pin | H10 Controller:Jumper_Block_1x02_2.54mm | JB1 |
| 1 | MAX3232 | H10 Controller:SSOP-16_4.4x5.2mm_Pitch0.65mm | U5 |
Questions
How big is the H10 Controller PCB?
It measures 115.1 × 71.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the H10 Controller use?
25 parts, built around the MAX3232ID, 74HCT04D, 74HCT165D and 74HCT595D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the H10 Controller KiCad files?
From the tlsystems/H10-Controller repository on GitHub, at the commit this page was made from: the board is Controller Nano/H10 Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the H10 Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask tlsystems before reusing the design.
More from tlsystems/H10-Controller
1Similar boards
- 2 layers69.9 × 96.1 mm
Zxsd
sittner/tinyfs
TinyFS is a minimalist filesystem designed for extremely constrained embedded systems. The initial reason to create this project was the attempt to build a filesystem that can run on a ZX81 without any additional…
37 parts3GPL-3.0 - 4 layers161.1 × 82.9 mm
- 2 layers99.1 × 99.7 mm
RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers102 × 96 mm
- 2 layers76.6 × 57.4 mm
Divtiesus acer
arleybls/divtiesus-acer
Custom 2-layer PCB re-layout of DivTIESUS — a DivMMC SD card interface for the ZX Spectrum, with the upstream CPLD firmware unchanged.
42 parts3 - 2 layers55.9 × 99.7 mm
- 2 layers
Solartron 7075 interface unplaced
cHemingway/llm_circuitgen_tests
Tests of various "circuit as code" tools
94 parts - 2 layers218 × 125 mm
EVA1 v2
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
160 parts