

Breakout tt08-cob
- Size
- 50 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 157
- Nets
- 64
- Pads
- 439
- Tracks, vias
- 873, 118
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Oct 2025
- Updated
- 29 Oct 2025
Overview
Breakout tt08-cob is an open-source printed circuit board by TinyTapeout, from the TinyTapeout/breakout-tt08-cob repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50 × 52 mm with 157 parts on 64 nets, routed with 873 tracks and 118 vias.
It is built around the 24LC02BT-I/MC, RC1206FR-130RL and RC0402JR-070RL, with the NPTC202KFMS-RC among its other parts. Its parts include 19 capacitors, 6 resistors, 5 connectors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
424LC02BT-I/MC
UDFN-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C DFN-8-EP(2x3) EEPROM ROHSMicrochip TechnologyEEPROMRC1206FR-130RL
1206-55℃~+155℃ 130Ω 200V 250mW Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRC0402JR-070RL
UncategorisedUnknown makerNPTC202KFMS-RC
SMD,P=2.54mm-40℃~+125℃ 2 2.54mm 2.54mm 250V 3A 40P 7.6mm Phosphor bronze Square Hole Surface Mount,Vertical Tin SMD,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
README
README.mdTiny Tapeout COB pcb (TT08)

Parts
157| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1, STITCHB1 +45 |
| 37 | StitchingVia-0.3mm | flyingcarsfootprints:StitchingVia-0.3mm | STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1, STITCHM1 +21 |
| 12 | Jumper_2_Small_Bridged | TinyTapeout:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmEasyCut | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12 |
| 10 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 9 | C_1u_0603_50V | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C14, C15, C16, C17, C18, C19 |
| 5 | TestPoint_Alt | TestPoint:TestPoint_Keystone_5019_Minature | TP1, TP2, TP3, TP4, TP9 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP5, TP6, TP7, TP8 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2, J3 |
| 2 | NPTC202KFMS-RC | TinyTapeout:FH-00148_PinSocket_2x20_P2.54mm | CON1, CON2 |
| 1 | 24LC02 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MountingHole | MountingHole:ToolingHole_1.152mm | H2 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1 |
| 1 | Openframe_COB_TT08 | cob:caravel_cob_100_105 | U1 |
| 1 | TT_logo | Logos:TT_logo | TTLOGO1 |
Similar boards
- 2 layers50 × 52 mm

- 2 layers50 × 52 mm

Breakout tt06-qfn
htfab/breakout-pcb-snapshot
The Tiny Tapeout chips are delivered on a breakout board that allows:
153 partsApache-2.0 - 2 layers58 × 52 mm

Adapter tt04-cb tt06-db
TinyTapeout/adapter-pcb
For interfacing between different versions of the carrier board and the demo board
9 partsApache-2.0 - 4 layers50 × 50 mm

- 4 layers89 × 61 mm

- 2 layers76 × 100 mm

AD3D Cloud Connect Board
Autodrop3d/AD3D-Connect-Board
Universal control board for Autodrop3d printers
23 parts1 - 2 layers45 × 52.5 mm

Breakout tt04-qfn openframe
chipfoundry/breakout-pcb-standalone
The Tiny Tapeout chips are delivered on a breakout board that allows:
106 partsApache-2.0 - 2 layers72.4 × 61.6 mm

Tt06-vga interposer
algofoogle/tt06-grab-bag
Assortment of analog and digital stuff for TT06
65 parts3Apache-2.0
Questions
How big is the Breakout tt08-cob PCB?
It measures 50 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout tt08-cob use?
157 parts, built around the 24LC02BT-I/MC, RC1206FR-130RL, RC0402JR-070RL and NPTC202KFMS-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout tt08-cob KiCad files?
From the TinyTapeout/breakout-tt08-cob repository on GitHub, at the commit this page was made from: the board is breakout-tt08-cob.kicad_pcb and its schematic breakout-tt08-cob.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout tt08-cob design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).