Skip to the content
2 layers68.6 × 48.3 mmOk to wake, the printed circuit board in 3D

This project provides code for a digital OK-to-Wake clock using an ESP32 with multiple input and output components.

Size
68.6 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
15
Pads
54
Tracks, vias
69, 1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Jul 2025
Updated
27 Jul 2025

Overview

Ok to wake is an open-source printed circuit board by timothy-s-dev, from the timothy-s-dev/ok-to-wake-clock repository on GitHub. It is a 2-layer board of 68.6 × 48.3 mm with 8 parts on 15 nets, routed with 69 tracks and 1 via.

It is built around the 2N2222A. Its parts include 3 switches, 2 connectors, 1 diode and 1 transistor. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

OK-to-Wake Clock - ESP32 Multi-Function Clock

This project provides code for a digital OK-to-Wake clock using an ESP32 with multiple input and output components. The clock includes rotary encoder input (w/ switch), RGB LED state indicator, alphanumeric display, and an RTC with battery backup so the time is not lost when power is.

A schedule can be set for each day of the week, with the following time windows:

  • Wind Down (Blue)
  • Sleep (Red)
  • Quiet (Yellow)
  • Wake (White)

Depending on which window the current time falls in for the current day's schedule the RGB LED will change colors.

Parts

8
QtyValueFootprintReferences
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
12N2222APackage_TO_SOT_THT:TO-92Q1
1Alphanumeric_Display_SocketConnector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_VerticalS1
1Barrel_JackConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ1
1MOUDLE-SEEEDUINO-XIAO-ESP32C3RF_Module:MCU_Seeed_ESP32C3MCU1
1NeoPixel_SocketConnector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_VerticalS2
1RTC_SocketConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalS3
1Rotary_Encoder_SocketConnector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_VerticalJ2

Similar boards

  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 2 layers279.4 × 203.2 mmZ180GDC, the printed circuit board in 3D

    Z180GDC

    lynchaj/rhyophyre

    Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

    249 parts12
  • 2 layers99.1 × 99.1 mmQL Qsound10x10, the printed circuit board in 3D

    QL Qsound10x10

    alvaroalea/QL_QsoundQprint_clone

    A clone board of the Sound card for the Sinclair QL Computer.

    23 parts11
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 2 layers89.3 × 50 mmMM58167-ISA RTC, the printed circuit board in 3D

    MM58167-ISA RTC

    jensma-de/MM58167-ISA-RTC

    RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.

    29 parts9
  • 2 layers97.6 × 76.8 mm12f675-mppt, the printed circuit board in 3D

    12f675-mppt

    rasberryrabbit/PIC12F675MPPT

    Solar MPPT circuit.

    45 parts9GPL-3.0
  • 2 layers14.6 × 13.6 mmChip and transistor, the printed circuit board in 3D

    Chip and transistor

    gidim/e61-gauge

    An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

    15 parts8
  • 2 layers147.2 × 58.3 mmLi IonBatteryProtection, the printed circuit board in 3D

    Li IonBatteryProtection

    cnobile2012/Li-IonBatteryProtection

    Circuit to protect Li-Ion and Li-Po batteries at the cell level.

    81 parts6MIT

Questions

How big is the Ok to wake PCB?

It measures 68.6 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ok to wake use?

8 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ok to wake KiCad files?

From the timothy-s-dev/ok-to-wake-clock repository on GitHub, at the commit this page was made from: the board is kicad/ok-to-wake/ok-to-wake.kicad_pcb and its schematic kicad/ok-to-wake/ok-to-wake.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ok to wake design in my own project?

Its repository states no licence, so its author keeps all rights: ask timothy-s-dev before reusing the design.