

Ok to wake
This project provides code for a digital OK-to-Wake clock using an ESP32 with multiple input and output components.
- Size
- 68.6 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 15
- Pads
- 54
- Tracks, vias
- 69, 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jul 2025
- Updated
- 27 Jul 2025
Overview
Ok to wake is an open-source printed circuit board by timothy-s-dev, from the timothy-s-dev/ok-to-wake-clock repository on GitHub. It is a 2-layer board of 68.6 × 48.3 mm with 8 parts on 15 nets, routed with 69 tracks and 1 via.
It is built around the 2N2222A. Its parts include 3 switches, 2 connectors, 1 diode and 1 transistor. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdOK-to-Wake Clock - ESP32 Multi-Function Clock
This project provides code for a digital OK-to-Wake clock using an ESP32 with multiple input and output components. The clock includes rotary encoder input (w/ switch), RGB LED state indicator, alphanumeric display, and an RTC with battery backup so the time is not lost when power is.
A schedule can be set for each day of the week, with the following time windows:
- Wind Down (Blue)
- Sleep (Red)
- Quiet (Yellow)
- Wake (White)
Depending on which window the current time falls in for the current day's schedule the RGB LED will change colors.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 2N2222A | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | Alphanumeric_Display_Socket | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | S1 |
| 1 | Barrel_Jack | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | RF_Module:MCU_Seeed_ESP32C3 | MCU1 |
| 1 | NeoPixel_Socket | Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical | S2 |
| 1 | RTC_Socket | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | S3 |
| 1 | Rotary_Encoder_Socket | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J2 |
Similar boards
- 2 layers101.5 × 83 mm

- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers99.1 × 99.1 mm

QL Qsound10x10
alvaroalea/QL_QsoundQprint_clone
A clone board of the Sound card for the Sinclair QL Computer.
23 parts11 - 2 layers156.5 × 67.5 mm

NixieScanDisplay
profdc9/NixieClock
A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.
106 parts10 - 2 layers89.3 × 50 mm

MM58167-ISA RTC
jensma-de/MM58167-ISA-RTC
RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.
29 parts9 - 2 layers97.6 × 76.8 mm

- 2 layers14.6 × 13.6 mm

Chip and transistor
gidim/e61-gauge
An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.
15 parts8 - 2 layers147.2 × 58.3 mm

Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT
Questions
How big is the Ok to wake PCB?
It measures 68.6 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ok to wake use?
8 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ok to wake KiCad files?
From the timothy-s-dev/ok-to-wake-clock repository on GitHub, at the commit this page was made from: the board is kicad/ok-to-wake/ok-to-wake.kicad_pcb and its schematic kicad/ok-to-wake/ok-to-wake.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ok to wake design in my own project?
Its repository states no licence, so its author keeps all rights: ask timothy-s-dev before reusing the design.