Skip to the content
2 layersSpinnekop, the printed circuit board in 3D

A microcontroller development board for 8-pin ATtiny AVR chips.

Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
9
Pads
31
Tracks, vias
76, 0
Routed
Yes
KiCad
KiCad 4
Created
18 Dec 2014
Updated
29 Jun 2015

Overview

Spinnekop is an open-source printed circuit board by thoquz, from the thoquz/Spinnekop-board repository on GitHub. It is a 2-layer board with 8 parts on 9 nets, routed with 76 tracks and 0 vias.

It is built around the ATTINY13A-SU and 78L05. Its parts include 4 connectors, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Spinnekop-board

A minimalist development board for 8-pin ATtiny series chips from Atmel.


Basic useful feature list:

  • Designed to be put on the edge of a breadboard, thus taking up minimal space for prototyping.
  • Acts as a breakout board for surface-mount ATtiny chips, each pin is directly broken out the same as the chip's topology.
  • Can be easily made at home, only a single layer of copper traces and 8 components. (including connectors)
  • Supports the ATtiny13/45/85 chips.
  • A programming port. (6-pin ICSP)
  • A linear voltage regulator for powering the board externally. (The LM78L05 can be swapped with a LP2950)

The board is designed in KiCAD

The example code requires the avr-gcc compiler.

Compiling and flashing the code on a Debian-based distro:

Shell
sudo apt-get install gcc-avr binutils-avr gdb-avr avr-libc avrdude
make
make flash

If the last command fails, change the PROGRAMMER variable in the Makefile to match your programming device. Consult the avrdude man page for the name of your programming device.

Parts

8
QtyValueFootprintReferences
2CCapacitors_ThroughHole:Capacitor3MMDiscRM2.5C1, C2
2CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P1, P2
178L05Discret:LM78LXXU1
1ATTINY13A-SSMD_Packages:SOIC-8-WIC1
1AVR-ISP-6Pin_Headers:Pin_Header_Straight_2x03CON1
1CONN_01X02Pin_Headers:Pin_Header_Straight_2x01P3

Similar boards

  • 2 layers110 × 99.6 mmPCIce, the printed circuit board in 3D

    PCIce

    ZoidTechnology/PCIce

    A PCI Express card with an inbuilt PWM fan controller and mounting points for an 80mm fan.

    22 parts90GPL-3.0
  • 2 layers180.1 × 180.3 mmLibreRouter MegaBoard, the printed circuit board in 3D

    LibreRouter MegaBoard

    LibreRouterOrg/board

    LibreRouter hardware repository

    237 parts55AGPL-3.0
  • 2 layers100.6 × 74.9 mmNes discrete mapper 1-1, the printed circuit board in 3D

    Nes discrete mapper 1-1

    MouseBiteLabs/NES-Cartridges

    A collection of Nintendo Entertainment System (NES) cartridge circuit boards

    55 parts25CC-BY-SA-4.0
  • 2 layers51 × 43 mmEgg timer, the printed circuit board in 3D

    Egg timer

    MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board

    A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

    25 parts13GPL-3.0
  • 2 layers10.2 × 27.7 mmXbox tray emulator, the printed circuit board in 3D

    Xbox tray emulator

    AR1972/Xbox_tray_emulator

    Original Xbox DVD tray emulation via ATtiny MCU

    6 parts6WTFPL
  • 2 layers26.2 × 29.7 mmDigipot, the printed circuit board in 3D

    Digipot

    dilshan/mcp4141-digital-pot

    MCP4141 and ATtiny13 based digital potentiometer

    5 parts5MIT
  • 2 layers70 × 50.1 mmDoom clock, the printed circuit board in 3D

    Doom clock

    stecman/avr-doomclock

    GPS clock on an ATTiny with MAX7219 7-segment driver

    24 parts5MIT
  • 2 layers40 × 25 mmToastFlow, the printed circuit board in 3D

    ToastFlow

    jaanuskalde/ToastFlow

    Toaster reflow oven controller

    23 parts1

Questions

What parts does the Spinnekop use?

8 parts, built around the ATTINY13A-SU and 78L05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spinnekop KiCad files?

From the thoquz/Spinnekop-board repository on GitHub, at the commit this page was made from: the board is spinnekop.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spinnekop design in my own project?

Its repository states no licence, so its author keeps all rights: ask thoquz before reusing the design.