Skip to the content
2 layers72 × 45 mmMocap jacks, the printed circuit board in 3D

PCB to create Qualisys connexion point that can be shunted by standard ethernet cable instead of long and expensive teconnectivity cloudsplitter cables (power + data)

Size
72 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
27
Pads
95
Tracks, vias
111, 16
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Feb 2025
Updated
18 Feb 2025

Overview

Mocap jacks is an open-source printed circuit board by thomasfla, from the thomasfla/Qualisys-passthrough-connector repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 72 × 45 mm with 9 parts on 27 nets, routed with 111 tracks and 16 vias.

It is built around the RJ45.

Main components

1

README

README.md

Qualisys-passthrough-connector

PCB to create Qualisys connexion point that can be shunted by standard ethernet cable instead of long and expensive teconnectivity cloudsplitter cables (power + data)

Online viewer for this PCB: https://kicanvas.org/?github=https%3A%2F%2Fgithub.com%2Fthomasfla%2FQualisys-passthrough-connector

BOM:

Parts

9
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_2.5mm_Pad_ViaH1, H2, H3
22178126-1lib:21781261J1, J2
2Conn_01x02_SocketConnector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalJ5, J6
2RJ45Connector_RJ:RJ45_Amphenol_54602-x08_HorizontalJ3, J4

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 4 layers84 × 82 mmToad, the printed circuit board in 3D

    Toad

    travisgoodspeed/goodfet

    An embedded bus adapter for various microcontrollers and radios.

    241 parts333
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99
  • 2 layers50 × 55.4 mmCasserole, the printed circuit board in 3D

    Casserole

    puddly/casserole

    Control GE appliances

    23 parts94Apache-2.0
  • 2 layers67.9 × 47.8 mmPlatine, the printed circuit board in 3D

    Platine

    nv1t/standing-desk-interceptor

    I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project

    11 parts52CC0-1.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layers73.9 × 84.5 mmAei, the printed circuit board in 3D

    Aei

    Severson-Group/AMDC-Hardware

    Circuit board designs for controlling advanced motor systems

    54 parts51
  • 2 layers99 × 60 mmPwr, the printed circuit board in 3D

    Pwr

    mfkiwl/KiwiSDR_PCB

    KiCAD PCB files for KiwiSDR project including active antenna and bias tee

    64 parts46

Questions

How big is the Mocap jacks PCB?

It measures 72 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mocap jacks use?

9 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mocap jacks KiCad files?

From the thomasfla/Qualisys-passthrough-connector repository on GitHub, at the commit this page was made from: the board is mocap_jacks.kicad_pcb and its schematic mocap_jacks.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mocap jacks design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).