
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

Modern implementation of the AGC Monitor, for use with a real Apollo Guidance Computer
Agc monitor is an open-source printed circuit board by thewonderidiot, from the thewonderidiot/agc_monitor repository on GitHub, published under the MIT licence. It is a 4-layer board of 144.6 × 73 mm with 66 parts on 191 nets, routed with 2,059 tracks and 144 vias.
It is built around the MMBT3904. Its parts include 20 resistors, 6 diodes, 6 connectors, 4 transistors and 3 capacitors.
This is a modern reimplementation of the AGC Monitor, for use with a real Apollo Guidance Computer. The panel layout and behavior were implemented according to pictures and descriptions from E-2026, User's Guide to the AGC Monitor (Core Rope Simulator). Both the descriptions and pictures in this document leave a lot to be desired, so best guesses were made where concrete information was not available. All logic is implemented in a Numato Lab Styx Z7 FPGA Module, which is connected to the AGC via interface circuits powered by the AGC itself. Host interfacing is done via FTDI Synchronous FIFO. The host GUI is implemented in python using PySide2.
An early version of this project was shown in episode 8 of the Apollo Guidance Computer Restoration video series, and it played a central role for the rest of the restoration.
Original AGC Monitor panel and modern GUI
Monitor board installed in an AGC for testing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 3.3k | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8, RN9, RN10, RN11, RN12, RN13, RN14, RN15, RN16 |
| 6 | 1.5k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R8, R12 |
| 6 | 330 | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R25, R26 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6 |
| 6 | MountingHole_Pad | agc_monitor:MountingHole_ANSI_4 | H1, H2, H3, H4, H5, H6 |
| 4 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | 1.2k | Resistor_SMD:R_0603_1608Metric | R6, R10 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R14 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C3 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 8.2uH | Inductor_SMD:L_1812_4532Metric | L1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Horizontal | J3 |
| 1 | STMPS2151_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Styx_P4 | agc_monitor:PinHeader_4x24_P2.54mm_Vertical | J4 |
| 1 | Styx_P5 | agc_monitor:PinHeader_4x24_P2.54mm_Vertical | J5 |
| 1 | TPS77633_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | test_connector | agc_monitor:test_connector | P1 |

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io



iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
It measures 144.6 × 73 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thewonderidiot/agc_monitor repository on GitHub, at the commit this page was made from: the board is board/agc_monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).