

BadgeMagic
Badge Magic Hardware Board
- Size
- 90 × 25.5 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 525
- Nets
- 59
- Pads
- 1,152
- Tracks, vias
- 4,005, 561
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Jul 2016
- Updated
- 6 Jul 2026
Overview
BadgeMagic is an open-source printed circuit board by fossasia, from the fossasia/badgemagic-hardware repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 90 × 25.5 mm with 525 parts on 59 nets, routed with 4,005 tracks and 561 vias.
It is built around the CH582M, DW03 and XC6206P362MR, with the MMBT3904 among its other parts. Its parts include 484 diodes, 12 resistors, 8 capacitors, 5 ICs and 2 connectors. It belongs with the lEDs and displays boards of this library.
Main components
4CH582M
QFN-48-EP(5x5)-40℃~+85℃ 12bit 2.3V~3.6V 32 Bit 32KB 40 512KB 80MHz Built-in+External FLASH Others Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Software reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、Calendar function、Built-in temperature sensor、Touch function QFN-48-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)DW03
SOT-23-5L-40℃~+85℃ 1 1uA 2.4V 2V~6V 4.3V Protection IC Support SOT-23-5L Battery Management ROHSHXY MOSFETBattery ManagementXC6206P362MR
SOT-23-25℃~+80℃@(Ta) 1 200mV@(50mA) 250mA 3.6V 40dB@(1kHz) 7uA 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdBadge Magic Hardware
This repository contains the hardware design files for Badge Magic, an open-source LED badge platform that lets you create and display custom text, clipart, and animations over Bluetooth using the Badge Magic apps or Python libraries. While its latest hardware revision may not yet be mass-produced, it shares the same RISC-V chip as many other LED badges (e.g., LeSun, Victronics) but provides extra functionality, including a built-in microphone for real-time ambient sound visualization, external flash storage, and two top-mounted buttons that allow for mini-games and other interactive features. To see which functions are supported or in progress, visit the dedicated firmware repository.
PCB Layout
Front side

Back side

Applications and Firmware Source Repositories
The following software components are available:
- Firmware: https://github.com/fossasia/badgemagic-firmware
- Android app: https://github.com/fossasia/badgemagic-app
Buy Device
- You can get the board at the FOSSASIA Shop.
Platform
- Microcontroller Platform: WCH QingKe RISC-V Bluetooth
- Toolchain: MRS_Toolchain_Linux_x64_V1.91
- Programming Tool: wchisp
Parts list
- WCH CH582M(QFN48) Microcontroller
- XC6206P332MR
- LP4054
- DW03
- USB-C
- Electret microphone
- External flash storage
- 32Mhz Crystal
- 3.7v 280mAh Li-ion battery
- LEDs, buttons, resistors, capacitors,
- and more
Hardware Specs
- 11x44 LED Matrix display
- BLE 5.3
- USB 1.1
Parts
525| Qty | Value | Footprint | References |
|---|---|---|---|
| 484 | LED | BadgeMagic:LED_0603 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +468 |
| 8 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | button | BadgeMagic:1TS003A-1800-3500A-CT | KEY1, KEY2, KEY3, KEY4 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R12 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R6, R9 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | TestPoint | BadgeMagic:TestPoint_Pad_D0.6mm | TP3, TP4 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 182k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 3.7v 280mAh | BadgeMagic:Battery cell | BT1 |
| 1 | 30K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 32 MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 3k92 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | Antenna | BadgeMagic:Custom_SWRA117D_2.4GHz_Right | AE1 |
| 1 | CH582M | BadgeMagic:CH582-QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm | U1 |
| 1 | Conn_01x02 | BadgeMagic:JST_1x02_P2.50mm_SMD_Horizontal | J1 |
| 1 | DW03 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | LP4054 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | NOR Flash | BadgeMagic:USON-8_2x3 | U5 |
| 1 | RX | BadgeMagic:TestPoint_Pad_D0.6mm | TP2 |
| 1 | SAMZO MIC-4013-G-G00 | BadgeMagic:microphone | MK1 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | TX | BadgeMagic:TestPoint_Pad_D0.6mm | TP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | BadgeMagic:USB_C_Receptacle_GCT_USB4110 | J2 |
| 1 | XC6206P362MR | Package_TO_SOT_SMD:SOT-23-3 | U2 |
Similar boards
- 2 layers59.2 × 52.9 mm

- 2 layers16.5 × 16.2 mm

- 2 layers34 × 38.4 mm

Oledmotion
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
47 parts114 - 2 layers31.8 × 25.4 mm

- 4 layers95 × 55.5 mm

EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers74.5 × 70.3 mm

Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
229 parts628CERN-OHL-S-2.0
Questions
How big is the BadgeMagic PCB?
It measures 90 × 25.5 mm and has 2 copper layers, 0.8 mm thick.
What parts does the BadgeMagic use?
525 parts, built around the CH582M, DW03, XC6206P362MR and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BadgeMagic KiCad files?
From the fossasia/badgemagic-hardware repository on GitHub, at the commit this page was made from: the board is schematics/BadgeMagic.kicad_pcb and its schematic schematics/2col.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BadgeMagic design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).