Skip to the content
4 layers54 × 92 mmMouse1, the printed circuit board in 3D

This is a mouse with hall effect switches that I made after 1 week of starting electrical engineering( since I'm in high school math and some things might be flawed but I will update the designs)

Size
54 × 92 mm
Copper layers
4
Thickness
1.6 mm
Parts
21
Nets
88
Pads
179
Tracks, vias
407, 54
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Oct 2024
Updated
3 Oct 2024

Overview

Mouse1 is an open-source printed circuit board by thesamurai1A, from the thesamurai1A/Hall-Effect-mouse-V1 repository on GitHub. It is a 4-layer board of 54 × 92 mm with 21 parts on 88 nets, routed with 407 tracks and 54 vias.

It is built around the ESP32-WROOM-32, MPR121QR2 and PMW3360DM-T2QU, with the DRV5053VAQDBZRQ1 among its other parts. Its parts include 5 capacitors, 5 resistors, 5 ICs, 4 switches and 1 connector. It belongs with the ESP32 and STM32 boards of this library.

Main components

4

README

README.md

Hall-Effect-mouse-V1

This is a mouse with hall effect switches that I made after 1 week of starting electrical engineering( since I'm in high school math and some things might be flawed but I will update the designs)

Wiring and components is as follow: U1/stm32f042k6ux

PB0: SDA PB1: SCL VDD: VBUS and Ground through C1 VSS: Ground PA0: Vout U2 PA1: Vout U3 PA2: SW1 through R2 PA3: SW2 PA4: SW3 PA5: SW4 PA6: SCLK PA7: M0SI PA8: TxD0 PA9: RxD0 PA11: D- PA12: D+ through R1 PA13: MISO PA14: CS PA15: IRQ

U2/drv5053vaqdbzr

VCC: Vbus GND: Ground Vout: PA1

U3/drv5053vaqdbzr

VCC: Vbus GND: Ground Vout: PA0

U4/PMW3360dm-t2qu

VDD: Vbus GND: Ground LED_P: Vbus Reset: SW1 through R3 SCLK: PA6 MOSI: PA7 MISO: PA13 CS: PA14 P1/USB_C_Plug_USB2.0

Vbus: CC, Ground and other components power connections CC: Vbus D-: PA11 D+: PA12 through R GND: Vbus and Ground Shield: Ground through C3

MOD1/ESP32-WROOM-32

3v3: Vbus TxDO: PA8 RxDO: PA9 GND: ground GND: ground GND: ground GND: ground

U5/MPR121QR2

VDD: Vbus VSS: Ground parallel C2 SDA: PB0 SCL: PB1 IRQ: PA15

SW1

PIN1: PA2 through R2 and reset U4 PIN2: Ground

SW2

PIN1: PA3 PIN2: Ground

SW3

PIN1: PA4 PIN2: Ground

SW4

PIN1: PA5 PIN2: Ground

C1: VDD and VDD to ground

C2: Parallel to VSS and ground

C3: Shield and ground

C4: Vbus and GND

C5: Parallel to U4GND and ground

R1: PA12 and D+

R2: PA2 and SW1

R3: Parallel to R2 connected to SW1 wiring

R4: Connected in parallel Vbus and LED_P

R5: Connected in parallel to VDD and Vbus

Parts

21
QtyValueFootprintReferences
41ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C5
310kPCM_Resistor_SMD_AKL:R_0805_2012MetricR2, R3, R5
2DRV5053VAQDBZRdigikey-footprints:SOT-23-3U2, U3
2SW_Omron_B3FSPCM_Switch_Keyboard_Alps_Matias:SW_Alps_MatiasSW2, SW3
110ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
122PCM_Resistor_SMD_AKL:R_0805_2012MetricR1
1330PCM_Resistor_SMD_AKL:R_0805_2012MetricR4
1ESP32-WROOM-32digikey-footprints:ESP32-WROOM-32DMOD1
1MPR121QR2Package_DFN_QFN:UQFN-20_3x3mm_P0.4mmU5
1PMW3360DM-T2QUPMW3360DM-T2QU (1):PMW3360U4
1STM32F042K6UxPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU1
1SW_Omron_B3FSButton_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx43PSMTRSW4
1SW_Omron_B3FSButton_Switch_SMD:SW_SPST_Omron_B3FS-100xPSW1
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11P1

Similar boards

  • 2 layers259.5 × 133 mmMainBoard BrooksGen5XMini, the printed circuit board in 3D

    MainBoard BrooksGen5XMini

    tristanmelton/FaradayFightstick

    Utilize Hall Effect sensors in an open-source leverless

    110 parts3MIT
  • 2 layers16.4 × 7 mmSense pcb, the printed circuit board in 3D

    Sense pcb

    ab3nd/ouija_board

    Hardware and software plans for a ouija board that is controlled by a computer as an IO device

    18 parts2
  • 2 layers220 × 20 mmSensorboard, the printed circuit board in 3D

    Sensorboard

    penton1753/knightly

    Assets for Knightly, an automatic chessboard product by Chessington.

    32 parts1CC-BY-SA-4.0
  • 2 layers82 × 60 mmAngloRightKeyboard, the printed circuit board in 3D

    AngloRightKeyboard

    schult/midi_concertina

    This is a 30-button Anglo Concertina MIDI controller. Click the image below to watch a short demo:

    47 parts1
  • 2 layers135 × 58.1 mmMotherboard, the printed circuit board in 3D

    Motherboard

    serge-scl/mini-keyboard

    mouse keyboard device

    90 parts
  • 4 layers41 × 90.2 mmAeropod2, the printed circuit board in 3D

    Aeropod2

    eyendamuri/aeropod

    An esp32 based mp3 player with the ability to play video too.

    67 parts
  • 4 layers74.5 × 70.3 mmNest mini v2-drop in pcb, the printed circuit board in 3D

    Nest mini v2-drop in pcb

    iMike78/nest-mini-drop-in-pcb

    Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

    229 parts628CERN-OHL-S-2.0
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188

Questions

How big is the Mouse1 PCB?

It measures 54 × 92 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mouse1 use?

21 parts, built around the ESP32-WROOM-32, MPR121QR2, PMW3360DM-T2QU and DRV5053VAQDBZRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mouse1 KiCad files?

From the thesamurai1A/Hall-Effect-mouse-V1 repository on GitHub, at the commit this page was made from: the board is mouse1/mouse1.kicad_pcb and its schematic mouse1/mouse1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mouse1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask thesamurai1A before reusing the design.