
Trs master board v3
TheRobotStudio/Electronics
KiCad projects for robot custom electronics.

KiCad projects for robot custom electronics.
Trs slave board v6 is an open-source printed circuit board by TheRobotStudio, from the TheRobotStudio/Electronics repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 40 × 58.4 mm with 20 parts on 55 nets, routed with 179 tracks and 0 vias.
It is built around the SN65HVD232D. Its parts include 9 connectors, 2 capacitors, 2 resistors and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_4 | PIN_ARRAY_4x1 | P1, P2, P6 |
| 2 | CONN_1 | PIN_ARRAY_1 | P8, P9 |
| 2 | CONN_6 | PIN_ARRAY-6X1 | P3, P4 |
| 2 | P*** | 1pin | 1PIN, 1PIN |
| 1 | 10µF | C1V5 | C1 |
| 1 | 120 | c_0603 | R1 |
| 1 | C | c_0603 | C2 |
| 1 | CONN_10 | r_pack9 | P5 |
| 1 | CONN_3 | PIN_ARRAY_3X1 | K1 |
| 1 | CONN_8X2 | pin_array_8x2 | P7 |
| 1 | Headers_CONN | PIN_ARRAY_5x2 | MASTER_EPOS2_1 |
| 1 | MUX_CD74HC4067 | SOIC24-WIDE | MUX_1 |
| 1 | R | c_0603 | R2 |
| 1 | SN65HVD232D | so-8 | CAN_Transceiver1 |
| 1 | mbed_NXP_LPC1768 | Mbed | MBED_SB_1 |

TheRobotStudio/Electronics
KiCad projects for robot custom electronics.

ClemensElflein/xESC
The xESC is an easy to use, low cost electronic speed controller (ESC) design for sensored brushless DC (BLDC) motors.

vedderb/QuadcopterSystem
The hardware and software for our quadcopter system



wjklimek1/CAN_motor_controller
H-bridge for DC motor controlled by CAN or PWM

KozaMateusz/tire_temperature_sensor
TTS (Tire Temperature Sensor) is a PCB designed to measure the temperature quickly, at a distance, and without the need to touch the wheels.

PREDICT-EPFL/RoboCape
This repository is dedicated to a Beaglebone cape extension developped at EPFL in the Automatic Control Laboratory.

TreeNewbeer/Coonix
Coonix is a funny project about building a application platform in Allwinner-v3s processor.
It measures 40 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the SN65HVD232D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheRobotStudio/Electronics repository on GitHub, at the commit this page was made from: the board is slave_board/trs_slave_board_v6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).