
Trs slave board v6
TheRobotStudio/Electronics
KiCad projects for robot custom electronics.

KiCad projects for robot custom electronics.
Trs master board v3 is an open-source printed circuit board by TheRobotStudio, from the TheRobotStudio/Electronics repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 53.3 × 77.7 mm with 20 parts on 28 nets, routed with 235 tracks and 0 vias.
It is built around the MAX232N. Its parts include 6 switches, 2 capacitors, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SLAVE_CONN | pin_array_4x2 | S1, S2, S3, S4, S5, S6 |
| 3 | 100 nF | C1 | C_BYPASS1, C3, C4 |
| 2 | 1µF | C1 | C1, C2 |
| 2 | P*** | 1pin | 1PIN, 1PIN |
| 1 | 10µF | C1V5 | CF2 |
| 1 | 47µF | C1V7 | CF1 |
| 1 | CONN_2 | PIN_ARRAY_2X1 | P1 |
| 1 | DB9 | DB9FC | SUB_D1 |
| 1 | MAX232 | DIP-16__300 | U1 |
| 1 | SWADJ | LM78XXV | 4.5v1 |
| 1 | mbed_NXP_LCP1768 | Mbed | MBED_MB_1 |

TheRobotStudio/Electronics
KiCad projects for robot custom electronics.


peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

necroware/ps2-serial-mouse-adapter
PS/2 to serial port mouse adapter

LimeProgramming/USB-serial-mouse-adapter
Convert USB mouse to Serial mouse using Pi Pico

RetroFuturisticEngineer/RetroARDUInput
Use USB Keyboards, Mice and Joysticks on PC/XT, PC/AT, Tandy 1000, Atari, Amiga, C64 and Apple

jbevren/6809v2
Code and design repository for the 6809v2 SBC: To be released at VCFMW 13

cyberboy666/_transcribe_
midi to rs232 bridge - for performance control of old video mixers and switchers

AK-Homberger/NMEA0183-WiFi-Multiplexer
Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.
It measures 53.3 × 77.7 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the MAX232N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TheRobotStudio/Electronics repository on GitHub, at the commit this page was made from: the board is master_board/trs_master_board_v3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).