

STM32F401
Have fun with an STM32F401 breakout board
- Size
- 36.8 × 95.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 108
- Pads
- 323
- Tracks, vias
- 629, 85
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Oct 2022
- Updated
- 10 Jan 2023
Overview
STM32F401 is an open-source printed circuit board by thecasterian, from the thecasterian/STM32F401-Playground repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 36.8 × 95.3 mm with 67 parts on 108 nets, routed with 629 tracks and 85 vias.
It is built around the STM32F103CBT6, STM32F401RCT6 and AMS1117-3.3, with the USBLC6-2SC6, TC2030-IDC-NL and B5819W among its other parts. Its parts include 22 resistors, 21 capacitors, 7 connectors, 4 ICs and 4 diodes. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.
Main components
7STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F401RCT6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 12bit 256KB 32 Bit 50 64KB 84MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)TC2030-IDC-NL
UncategorisedTag ConnectB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesS9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdSTM32F401 Playground
STM32F401 Breakout Board
This is a breakout board for the STM32F401RCT6 microcontroller. It has a built-in ST-Link programmer just like ST's discovery boards. It also has a reset button, 8-MHz HSE crystal, and jumper pins for the BOOT0 and the virtual COM port.
References
- STM32F401 Reference Manual
- Custom ST-Link V2.0 / V2.1 / V3.0
- Reference for the hardware and the firmware of ST-Link programmer.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C8, C9, C10, C11, C12, C13, C15, C16, C17, C18 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R6, R7, R16 |
| 5 | 22 | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20, R21 |
| 4 | 30pF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C20, C21 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C14, C19 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R14, R15, R22 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R5, R11 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R9 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1, Y2 |
| 2 | Pin Socket 2.54 mm | Connector_PinSocket_2.54mm:PinSocket_1x26_P2.54mm_Vertical | J4, J5 |
| 2 | Red | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | TC2030-IDC | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1, J7 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 600 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | NP | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | Pin Header 2.54 mm | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Pin Header 2.54 mm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | S9013 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | STM32F401RCT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | Tactile Switch | Custom Parts:SW_TS-1187A-B-A-B | SW1 |
| 1 | USB Micro B | Connector_USB:USB_Micro-B_Molex-105017-0001 | J6 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
Similar boards
- 4 layers55 × 55 mm

- 2 layers25.4 × 80.2 mm

RedPill board
simonyiszk/STM32-RedPill
STM32-based development board with integrated ST-LINK/V2 compatible programmer, to be used on SEM advanced courses.
63 parts1CERN-OHL-W-2.0 - 4 layers31 × 15 mm

- 4 layers100 × 100 mm

UMMTJ Mainboard
vamatis/UMMTJ
A universal Test jig setup for small production and prototype shops
147 parts - 4 layers48.3 × 47.5 mm

HWCorso
GiovanniRaseraF/DroneTheory
Tests, Theory, Development of Drone HW and SW + Vespin 1 Hardware
48 parts1GPL-3.0 - 4 layers76 × 76.9 mm

- 4 layers22.4 × 70.5 mm

- 2 layers46.5 × 37.4 mm

Hellen1-mcu
rusefi/hellen-miata-NB2
a rusEFI board with a 72 pin connector. Works for a Mazda Miata NB2 or any generic 8 cylinder vehicle :)
92 parts
Questions
How big is the STM32F401 PCB?
It measures 36.8 × 95.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STM32F401 use?
67 parts, built around the STM32F103CBT6, STM32F401RCT6, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F401 KiCad files?
From the thecasterian/STM32F401-Playground repository on GitHub, at the commit this page was made from: the board is Hardware/STM32F401.kicad_pcb and its schematic Hardware/ST-LINK_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F401 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).