2 layers391 × 131.1 mm
STM32F401RCT6
STMicroelectronicsExtended
-40℃~+85℃ 1.7V~3.6V 12bit 256KB 32 Bit 50 64KB 84MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F401RCT6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- LQFP-64(10x10)
- Pins
- 64
- In stock
- 469 at JLCPCB (C74524)
- Used on
- 17 open-source boards
Overview
The STM32F401RCT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.7V~3.6V 12bit 256KB 32 Bit 50 64KB 84MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F4:STM32F401RCTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 469 are in stock at JLCPCB (part C74524). 17 open-source boards in 16 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
14- Supply, least
- 1.7 V · VDD, recommended minimum; external supply supervisor required at 1.7 V · p. 59
- Supply, most
- 3.6 V · VDD, recommended maximum · p. 59
- Supply, least
- 1.65 V · VBAT, recommended minimum · p. 59
- Supply, absolute maximum
- 4 V · VDD, VDDA and VBAT, absolute maximum · p. 57
- Works from
- -40 °C · minimum ambient, temperature range 6 · p. 60
- Works up to
- 85 °C · maximum ambient, temperature range 6, maximum power dissipation · p. 60
- Works up to
- 105 °C · maximum ambient, temperature range 6, low power dissipation; TJ must remain within limit · p. 60
- Junction, hottest
- 105 °C · maximum junction, temperature range 6 · p. 60
- Takes working
- 11.8 mA · typical VDD run current, 84 MHz, Flash, ART enabled except prefetch, peripherals disabled, 3.3 V, 25 °C · p. 66
- Takes at most
- 35 mA · max VDD run current, 84 MHz, Flash, ART and prefetch enabled, peripherals enabled, 85 °C · p. 67
- Takes asleep
- 2.1 µA · typical standby, VDD = 3.3 V, RTC and LSE off, 25 °C · p. 69
- A pin gives at most
- 25 mA · absolute maximum current sunk by one I/O or control pin · p. 58
- Junction to air (LQFP64)
- 50 K/W · junction-to-ambient thermal resistance · p. 131
- Takes working
- 22.5 mA · VDD, typical run at 84 MHz, Flash, ART enabled except prefetch, peripherals enabled, 3.3 V, 25 °C · p. 66
What it is and has
28- Core
- Arm 32-bit Cortex-M4 CPU with FPU · p. 1
- Maximum core frequency
- 84 MHz · p. 1
- Flash memory
- Up to 256 Kbytes · p. 1
- OTP memory
- 512 bytes · p. 1
- SRAM
- Up to 64 Kbytes · p. 1
- Internal high-speed oscillator
- 16 MHz factory-trimmed RC · p. 1
- External high-speed oscillator
- 4-to-26 MHz crystal oscillator · p. 1
- Internal low-speed oscillator
- 32 kHz RC with calibration · p. 1
- Power supervision
- POR, PDR, PVD and BOR · p. 1
- Debug
- Serial wire debug and JTAG · p. 1
- SDIO
- SDIO interface · p. 1
- CRC
- CRC calculation unit · p. 1
- Unique ID
- 96-bit · p. 1
- Environmental package standard
- ECOPACK2 · p. 1
- Low-power modes
- Sleep, Stop and Standby · p. 25
- Core
- Arm Cortex-M4, 32-bit, FPU · p. 1
- Maximum clock
- 84 MHz · p. 1
- Flash memory
- 256KB · p. 1
- RAM
- 64KB · p. 1
- Timers
- 11 · p. 1
- ADC
- 1 · p. 1
- Communication interfaces
- 11 · p. 1
- Package
- LQFP64 (10×10 mm) · p. 1
- Core
- Arm Cortex-M4 32-bit MCU with FPU, 105 DMIPS · p. 1
- Clock
- up to 84 MHz · p. 1
- Memories and peripherals
- 256KB Flash / 64KB RAM, 11 TIMs, 1 ADC, 11 communication interfaces · p. 1
- Debug interfaces
- SWD and JTAG · p. 1
- ADC resolution
- 12-bit · p. 104
Around it
5- cap 2.2 µF
- between VCAP_1 and GND; Main regulator stabilization; ESR <2 Ω; table specifies capacitors for available VCAP_1 and VCAP_2 pins. · p. 61
- cap 100 nF
- between VCAP_1 and GND; Decoupling capacitor replacing the 2.2 uF capacitor when bypassing the voltage regulator. · p. 61
- crystal 4 to 26 MHz
- between OSC_IN and OSC_OUT; HSE crystal/ceramic resonator; place the resonator and load capacitors as close as possible to the oscillator pins. · p. 77
- cap 5 pF to 25 pF
- between OSC_IN and GND; CL1: high-quality ceramic for high-frequency applications; select to match the crystal load requirement, including PCB and MCU pin capacitance; place close to the oscillator pin. · p. 77
- crystal 32.768 kHz
- between OSC32_IN and OSC32_OUT; Optional LSE crystal/ceramic resonator; place the resonator and load capacitors as close as possible to the oscillator pins. · p. 78
Specifications
530| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD and VBAT) VDD–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 57 |
| Input voltage on any other pin VIN | Absolute maximum ratings; minimum VSS–0.3 | max 4 V | 57 |
| Input voltage for BOOT0 VIN | Absolute maximum ratings; minimum VSS | max 9 V | 57 |
| Variations between different VDD power pins |ΔVDDx| | Absolute maximum ratings | max 50 mV | 57 |
| Variations between all the different ground pins including VREF- |VSSX −VSS| | Absolute maximum ratings | max 50 mV | 57 |
| Total current into sum of all VDD_x power lines (source) ΣIVDD | Absolute maximum ratings | max 160 mA | 58 |
| Total current out of sum of all VSS_x ground lines (sink) Σ IVSS | Absolute maximum ratings | max -160 mA | 58 |
| Maximum current into each VDD_x power line (source) IVDD | Absolute maximum ratings | max 100 mA | 58 |
| Maximum current out of each VSS_x ground line (sink) IVSS | Absolute maximum ratings | max -100 mA | 58 |
| Output current sunk by any I/O and control pin IIO | Absolute maximum ratings | max 25 mA | 58 |
| Output current sourced by any I/O and control pin IIO | Absolute maximum ratings | max -25 mA | 58 |
| Total output current sunk by sum of all I/O and control pins ΣIIO | Absolute maximum ratings | max 120 mA | 58 |
| Total output current sourced by sum of all I/Os and control pins ΣIIO | Absolute maximum ratings | max -120 mA | 58 |
| Injected current on FT pins IINJ(PIN) | Absolute maximum ratings; printed limit –5/+0 mA | min -5 · max 0 mA | 58 |
| Injected current on NRST and B pins IINJ(PIN) | Absolute maximum ratings; printed limit –5/+0 mA | min -5 · max 0 mA | 58 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute maximum ratings; printed limit ±25 mA | min -25 · max 25 mA | 58 |
| Storage temperature range TSTG | Absolute maximum ratings | min -65 · max 150 °C | 58 |
| Maximum junction temperature TJ | Absolute maximum ratings | max 130 °C | 58 |
| Internal AHB clock frequency fHCLK | Power Scale3, regulator ON, VOS[1:0] = 0x01 | min 0 · max 60 MHz | 59 |
| Internal AHB clock frequency fHCLK | Power Scale2, regulator ON, VOS[1:0] = 0x10 | min 0 · max 84 MHz | 59 |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 42 MHz | 59 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 84 MHz | 59 | |
| Standard operating voltage VDD | 1.7 V minimum requires an external power supply supervisor | min 1.7 · max 3.6 V | 59 |
| Analog operating voltage (ADC limited to 1.2 M samples) VDDA | Must be the same potential as VDD; 1.7 V minimum requires an external power supply supervisor | min 1.7 · max 2.4 V | 59 |
| Analog operating voltage (ADC limited to 2.4 M samples) VDDA | Must be the same potential as VDD | min 2.4 · max 3.6 V | 59 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 59 | |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS[1:0] = 0x01; maximum frequency 60 MHz | min 1.08 · typ 1.14 · max 1.2 V | 59 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 | VOS[1:0] = 0x10; maximum frequency 84 MHz | min 1.2 · typ 1.26 · max 1.32 V | 59 |
| Input voltage on RST and FT pins VIN | 2 V ≤ VDD ≤ 3.6 V; disable internal pull-up and pull-down above VDD+0.3 | min -0.3 · max 5.5 V | 59 |
| Input voltage on RST and FT pins VIN | VDD ≤ 2 V; disable internal pull-up and pull-down above VDD+0.3 | min -0.3 · max 5.2 V | 59 |
| Input voltage on BOOT0 pin VIN | min 0 · max 9 V | 59 | |
| Power dissipation at TA = 85 °C (range 6) or 105 °C (range 7) PD | LQFP64; range 6 at TA = 85 °C | max 313 mW | 59 |
| Ambient temperature for range 6 TA | Maximum power dissipation | min -40 · max 85 °C | 60 |
| Ambient temperature for range 6 TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 60 |
| Junction temperature range TJ | Range 6 | min -40 · max 105 °C | 60 |
| Capacitance of external capacitor with available VCAP_1 and VCAP_2 pins CEXT | typ 2.2 uF | 61 | |
| ESR of external capacitor with available VCAP_1 and VCAP_2 pins ESR | Strictly less than 2 Ω | max 2 Ω | 61 |
| VDD rise time rate tVDD | Subject to general operating conditions for TA; maximum ∞ | min 20 us/V | 61 |
| VDD fall time rate tVDD | Subject to general operating conditions for TA; maximum ∞ | min 20 us/V | 61 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals enabled; typ at 25 °C; max at 85 °C | typ 20 · max 22 mA | 64 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals enabled; typ at 25 °C; max at 85 °C | typ 14.5 · max 16 mA | 64 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals enabled; typ at 25 °C; max at 85 °C | typ 10.4 · max 12 mA | 64 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals enabled; typ at 25 °C; max at 85 °C | typ 5.5 · max 7 mA | 64 |
| Supply current in Run mode IDD | 84 MHz; external clock; all peripherals disabled; typ at 25 °C; max at 85 °C | typ 10.9 · max 13 mA | 64 |
| Supply current in Run mode IDD | 60 MHz; external clock; all peripherals disabled; typ at 25 °C; max at 85 °C | typ 8 · max 10 mA | 64 |
| Supply current in Run mode IDD | 40 MHz; external clock; all peripherals disabled; typ at 25 °C; max at 85 °C | typ 5.8 · max 7 mA | 64 |
| Supply current in Run mode IDD | 20 MHz; external clock; all peripherals disabled; typ at 25 °C; max at 85 °C | typ 3.2 · max 5 mA | 64 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 20.2 · max 22 mA | 65 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 14.7 · max 16 mA | 65 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 10.7 · max 12 mA | 65 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 5.7 · max 7 mA | 65 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 11.2 · max 13 mA | 65 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 8.2 · max 10 mA | 65 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 6.1 · max 8 mA | 65 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C, VDD = 3.3 V; max 85 °C, VDD = 3.6 V | typ 3.4 · max 5 mA | 65 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 22.2 · max 24 mA | 65 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 14.5 · max 16 mA | 65 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 10.7 · max 12 mA | 65 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 8.6 · max 10 mA | 65 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 7 · max 9 mA | 65 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 11.5 · max 13 mA | 65 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 7.7 · max 9 mA | 65 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 5.6 · max 7 mA | 65 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 4.5 · max 6 mA | 65 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 3.8 · max 6 mA | 65 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 22.5 · max 24 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 14.8 · max 17 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 11 · max 13 mA | 66 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 8.9 · max 11 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C; max 85 °C | typ 7.3 · max 9 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 11.8 · max 14 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 7.9 · max 10 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 5.8 · max 8 mA | 66 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 4.8 · max 7 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C; max 85 °C | typ 4 · max 6 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 30.6 · max 34 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 21.4 · max 24 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 15.6 · max 17 mA | 66 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 12.7 · max 14 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 10 · max 12 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 19.9 · max 23 mA | 66 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 14.6 · max 16 mA | 66 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 10.4 · max 12 mA | 66 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 8.6 · max 10 mA | 66 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 6.7 · max 8 mA | 66 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 31.8 · max 35 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 21.8 · max 23 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 16 · max 18 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 12.9 · max 15 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 10.4 · max 12 mA | 67 |
| Supply current in Run mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 21.2 · max 23 mA | 67 |
| Supply current in Run mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 15 · max 17 mA | 67 |
| Supply current in Run mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 10.9 · max 13 mA | 67 |
| Supply current in Run mode IDD | 30 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 8.8 · max 11 mA | 67 |
| Supply current in Run mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 7.1 · max 9 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 16.2 · max 18 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 10.7 · max 12 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 8.3 · max 10 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 6.8 · max 8 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz; external clock; peripherals enabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 5.9 · max 7 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 5.2 · max 7 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 3.6 · max 5 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 2.9 · max 4 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 2.6 · max 4 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz; external clock; peripherals disabled; typ 25 °C, 3.3 V; max 85 °C, 3.6 V | typ 2.6 · max 4 mA | 67 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 109 · max 440 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 41 · max 310 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 72 · max 345 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 12 · max 260 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 10 · max 230 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 111 · max 450 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 42 · max 330 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 73 · max 360 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 12 · max 270 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode; all oscillators OFF; no independent watchdog; typ 25 °C; max 85 °C | typ 10 · max 230 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; typ 25 °C; max 85 °C | typ 2.4 · max 12 uA | 68 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; typ 25 °C; max 85 °C | typ 1.8 · max 11 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; typ 25 °C; max 85 °C | typ 2.8 · max 14 uA | 69 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 25 °C | typ 2.1 · max 4 uA | 69 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 85 °C | max 13 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 1.7 V | typ 0.66 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 2.4 V | typ 0.76 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 25 °C; VBAT = 3.3 V | typ 0.97 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; TA = 85 °C; VBAT = 3.6 V | max 3 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 1.7 V | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 2.4 V | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 25 °C; VBAT = 3.3 V | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; TA = 85 °C; VBAT = 3.6 V | max 2 uA | 69 |
| Thermal resistance junction-ambient ΘJA | LQFP64 | typ 50 °C/W | 131 |
| VDD rise time rate tVDD | Regulator ON | min 20 us/V | 61 |
| VDD fall time rate tVDD | Regulator ON | min 20 us/V | 61 |
| PDR hysteresis VPDRhyst | Guaranteed by design | typ 40 mV | 63 |
| Brownout level 1 threshold VBOR1 | Falling edge | min 2.13 · typ 2.19 · max 2.24 V | 63 |
| Brownout level 1 threshold VBOR1 | Rising edge | min 2.23 · typ 2.29 · max 2.33 V | 63 |
| Brownout level 2 threshold VBOR2 | Falling edge | min 2.44 · typ 2.5 · max 2.56 V | 63 |
| Brownout level 2 threshold VBOR2 | Rising edge | min 2.53 · typ 2.59 · max 2.63 V | 63 |
| Brownout level 3 threshold VBOR3 | Falling edge | min 2.75 · typ 2.83 · max 2.88 V | 63 |
| Brownout level 3 threshold VBOR3 | Rising edge | min 2.85 · typ 2.92 · max 2.97 V | 63 |
| BOR hysteresis VBORhyst | Guaranteed by design | typ 100 mV | 63 |
| POR reset timing TRSTTEMPO | Power-on or wakeup from VBAT to first instruction fetched | min 0.5 · typ 1.5 · max 3 ms | 63 |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH | Guaranteed by design | typ 160 · max 200 mA | 63 |
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH | VDD = 1.7 V, TA = 125 °C, IRUSH = 171 mA for 31 us | max 5.4 uC | 63 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 20 · max 21 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 22 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 23 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 14.5 · max 15 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 16 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 17 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 10.4 · max 11 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 12 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 13 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 5.5 · max 6 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 7 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 8 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 10.9 · max 11 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 13 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 14 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 8 · max 9 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 10 mA | 64 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 11 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 5.8 · max 6 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 7 mA | 64 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 8 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 3.2 · max 4 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 5 mA | 64 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 6 mA | 64 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 20.2 · max 21 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 22 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 23 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 14.7 · max 15 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 16 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 18 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10.7 · max 11 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 12 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 13 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 5.7 · max 6 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 7 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 8 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 11.2 · max 12 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 13 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 14 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 8.2 · max 9 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 10 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 11 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 6.1 · max 7 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 8 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 9 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 3.4 · max 4 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 5 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 6 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 22.2 · max 23 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 24 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 25 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 14.5 · max 15 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 16 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 17 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 10.7 · max 11 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 12 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 13 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 8.6 · max 9 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 10 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 11 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical TA = 25 °C; maximum TA = 25 °C | typ 7 · max 8 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum TA = 85 °C | max 9 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum TA = 105 °C | max 10 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 11.5 · max 12 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 13 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 14 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 7.7 · max 8 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 9 mA | 65 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 10 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 5.6 · max 6 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 7 mA | 65 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 8 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 4.5 · max 5 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 6 mA | 65 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 7 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; typical TA = 25 °C; maximum TA = 25 °C | typ 3.8 · max 5 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum TA = 85 °C | max 6 mA | 65 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum TA = 105 °C | max 7 mA | 65 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 22.5 · max 23 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 24 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 25 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 14.8 · max 16 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 17 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 18 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 11 · max 12 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 13 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 14 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 8.9 · max 10 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 11 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 12 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 7.3 · max 8 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 9 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 10 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 11.8 · max 13 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 14 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 15 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 7.9 · max 9 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 10 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 11 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 5.8 · max 7 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 8 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 9 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 4.8 · max 6 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 7 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 8 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 4 · max 5 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 6 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 7 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 30.6 · max 32 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 34 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 35 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 21.4 · max 22 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 24 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 25 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 15.6 · max 16 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 17 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 18 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 12.7 · max 13 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 14 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 15 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10 · max 11 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 12 mA | 66 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 13 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 19.9 · max 21 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 23 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 25 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 14.6 · max 15 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 16 mA | 66 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 17 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10.4 · max 11 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 12 mA | 66 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 13 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 8.6 · max 9 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 10 mA | 66 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 11 mA | 66 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 31.8 · max 33 mA | 67 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 35 mA | 67 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 36 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 21.8 · max 22 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 23 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 24 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 16 · max 17 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 18 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 19 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 12.9 · max 14 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 15 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 16 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10.4 · max 11 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 12 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 13 mA | 67 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 21.2 · max 22 mA | 67 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 23 mA | 67 |
| Supply current in Run mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 24 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 15 · max 16 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 17 mA | 67 |
| Supply current in Run mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 18 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10.9 · max 12 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 13 mA | 67 |
| Supply current in Run mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 14 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 8.8 · max 10 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 11 mA | 67 |
| Supply current in Run mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 12 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 7.1 · max 8 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 9 mA | 67 |
| Supply current in Run mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 10 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 16.2 · max 17 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 18 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 19 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 10.7 · max 11 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 12 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 13 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 8.3 · max 9 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 10 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 11 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 6.8 · max 7 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 8 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 9 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals enabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 5.9 · max 6 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 85 °C | max 7 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals enabled; maximum 3.6 V, 105 °C | max 8 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 5.2 · max 6 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 7 mA | 67 |
| Supply current in Sleep mode IDD | 84 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 8 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 3.6 · max 4 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 5 mA | 67 |
| Supply current in Sleep mode IDD | 60 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 6 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 2.9 · max 3 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 4 mA | 67 |
| Supply current in Sleep mode IDD | 40 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 5 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 2.6 · max 3 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 4 mA | 67 |
| Supply current in Sleep mode IDD | 30 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 5 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals disabled; typical 3.3 V, 25 °C; maximum 3.6 V, 25 °C | typ 2.6 · max 3 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 85 °C | max 4 mA | 67 |
| Supply current in Sleep mode IDD | 20 MHz, external clock, all peripherals disabled; maximum 3.6 V, 105 °C | max 5 mA | 67 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 109 · max 135 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 440 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 650 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 41 · max 65 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 310 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 530 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 72 · max 95 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 345 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 530 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 12 · max 36 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 260 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 510 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 10 · max 27 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 230 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 460 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 111 · max 140 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 450 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 670 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 42 · max 65 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 330 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Stop mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 560 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 73 · max 100 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 360 uA | 68 |
| Main regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 560 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 12 · max 36 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 270 uA | 68 |
| Low power regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 520 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 25 °C | typ 10 · max 28 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 85 °C | max 230 uA | 68 |
| Low power low voltage regulator usage IDD_STOP | Flash in Deep power down mode, all oscillators OFF, no independent watchdog; TA = 105 °C | max 470 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 25 °C | typ 2.4 · max 4 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 85 °C | max 12 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 105 °C | max 24 uA | 68 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 25 °C | typ 1.8 · max 3 uA | 68 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 85 °C | max 11 uA | 68 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 105 °C | max 23 uA | 68 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 25 °C | typ 2.8 · max 5 uA | 69 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 85 °C | max 14 uA | 69 |
| Supply current in Standby mode IDD_STBY | LSE and RTC ON; TA = 105 °C | max 28 uA | 69 |
| Supply current in Standby mode IDD_STBY | RTC and LSE OFF; TA = 105 °C | max 27 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; VBAT = 1.7 V, TA = 25 °C | typ 0.66 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; VBAT = 2.4 V, TA = 25 °C | typ 0.76 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; VBAT = 3.3 V, TA = 25 °C | typ 0.97 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; VBAT = 3.6 V, TA = 85 °C | max 3 uA | 69 |
| Backup domain supply current IDD_VBAT | LSE and RTC ON; VBAT = 3.6 V, TA = 105 °C | max 5 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; VBAT = 1.7 V, TA = 25 °C | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; VBAT = 2.4 V, TA = 25 °C | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; VBAT = 3.3 V, TA = 25 °C | typ 0.1 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; VBAT = 3.6 V, TA = 85 °C | max 2 uA | 69 |
| Backup domain supply current IDD_VBAT | RTC and LSE OFF; VBAT = 3.6 V, TA = 105 °C | max 4 uA | 69 |
| GPIOA IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| GPIOB IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| GPIOC IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| GPIOD IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| GPIOE IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| GPIOH IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.55 uA/MHz | 73 |
| CRC IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 0.36 uA/MHz | 73 |
| DMA1 IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 20.24 uA/MHz | 73 |
| DMA2 IDD | AHB1; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 21.07 uA/MHz | 73 |
| TIM2 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 11.19 uA/MHz | 73 |
| TIM3 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 8.57 uA/MHz | 73 |
| TIM4 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 8.33 uA/MHz | 73 |
| TIM5 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 11.19 uA/MHz | 73 |
| PWR IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 0.71 uA/MHz | 73 |
| USART2 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 3.33 uA/MHz | 73 |
| I2C1/2/3 IDD | APB1; per peripheral; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 3.1 uA/MHz | 73 |
| SPI2 IDD | APB1; footnote 1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 2.62 uA/MHz | 73 |
| SPI3 IDD | APB1; footnote 1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 2.86 uA/MHz | 73 |
| I2S2 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.9 uA/MHz | 73 |
| I2S3 IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.67 uA/MHz | 73 |
| WWDG IDD | APB1; PCLK1 = 42 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 0.71 uA/MHz | 73 |
| OTG_FS IDD | AHB2; HCLK = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 23.93 uA/MHz | 73 |
| TIM1 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 5.71 uA/MHz | 74 |
| TIM9 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 2.86 uA/MHz | 74 |
| TIM10 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.79 uA/MHz | 74 |
| TIM11 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 2.02 uA/MHz | 74 |
| ADC1 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental digital current; add 1.6 mA analog current when ADC ON | typ 2.98 uA/MHz | 74 |
| SPI1 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.19 uA/MHz | 74 |
| USART1 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 3.1 uA/MHz | 74 |
| USART6 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 2.86 uA/MHz | 74 |
| SDIO IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 5.95 uA/MHz | 74 |
| SPI4 IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 1.31 uA/MHz | 74 |
| SYSCFG IDD | APB2; PCLK2 = 84 MHz, VDD = 3.3 V, TA = 25 °C; incremental current | typ 0.71 uA/MHz | 74 |
| Wakeup from Sleep mode tWUSLEEP | VDD = 3.3 V; wakeup event to first instruction | typ 4 · max 6 CPU clock cycle | 74 |
| Wakeup from Stop mode, usage of main regulator tWUSTOP | VDD = 3.3 V; wakeup event to first instruction | typ 13.5 · max 14.5 us | 74 |
| Wakeup from Stop mode, usage of main regulator, Flash memory in Deep power down mode tWUSTOP | VDD = 3.3 V; wakeup event to first instruction | typ 105 · max 111 us | 74 |
| Wakeup from Stop mode, regulator in low power mode tWUSTOP | VDD = 3.3 V; wakeup event to first instruction | typ 21 · max 33 us | 74 |
| Wakeup from Stop mode, regulator in low power mode, Flash memory in Deep power down mode tWUSTOP | VDD = 3.3 V; wakeup event to first instruction | typ 113 · max 130 us | 74 |
| Wakeup from Standby mode tWUSTDBY | VDD = 3.3 V; maximum at –40 °C; wakeup event to first instruction | typ 314 · max 407 us | 74 |
| Oscillator frequency fOSC_IN | - | min 4 · max 26 MHz | 77 |
| Feedback resistor RF | - | typ 200 kΩ | 77 |
| HSE current consumption IDD | VDD=3.3 V, ESR= 30 Ω, CL=5 pF @25 MHz | typ 450 uA | 77 |
| HSE current consumption IDD | VDD=3.3 V, ESR= 30 Ω, CL=10 pF @25 MHz | typ 530 uA | 77 |
| Maximum critical crystal gm Gm_crit_max | Startup | max 1 mA/V | 77 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 77 |
| Feedback resistor RF | - | typ 18.4 MΩ | 78 |
| LSE current consumption IDD | - | max 1 uA | 78 |
| Maximum critical crystal gm Gm_crit_max | Startup | max 0.56 uA/V | 78 |
| startup time tSU(LSE) | VDD is stabilized | typ 2 s | 78 |
| PLL input clock fPLL_IN | - | min 0.95 · typ 1 · max 2.1 MHz | 81 |
| PLL multiplier output clock fPLL_OUT | - | min 24 · max 84 MHz | 81 |
| 48 MHz PLL multiplier output clock fPLL48_OUT | - | typ 48 · max 75 MHz | 81 |
| PLL VCO output fVCO_OUT | - | min 192 · max 432 MHz | 81 |
| PLL lock time tLOCK | VCO freq = 192 MHz | min 75 · max 200 us | 81 |
| PLL lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 81 |
| Cycle-to-cycle jitter Jitter | System clock 84 MHz; RMS | typ 25 ps | 81 |
| Period Jitter Jitter | System clock 84 MHz; RMS | typ 15 ps | 81 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 192 MHz | min 0.15 · max 0.4 mA | 81 |
| PLL power consumption on VDD IDD(PLL) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 81 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 192 MHz | min 0.3 · max 0.4 mA | 81 |
| PLL power consumption on VDDA IDDA(PLL) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 81 |
| PLLI2S input clock fPLLI2S_IN | - | min 0.95 · typ 1 · max 2.1 MHz | 82 |
| PLLI2S multiplier output clock fPLLI2S_OUT | - | max 216 MHz | 82 |
| PLLI2S VCO output fVCO_OUT | - | min 192 · max 432 MHz | 82 |
| PLLI2S lock time tLOCK | VCO freq = 192 MHz | min 75 · max 200 us | 82 |
| PLLI2S lock time tLOCK | VCO freq = 432 MHz | min 100 · max 300 us | 82 |
| Master I2S clock jitter Jitter | Cycle to cycle at 12.288 MHz on 48 KHz period, N=432, R=5; RMS; main PLL running | typ 90 - | 82 |
| Master I2S clock jitter Jitter | Average frequency of 12.288 MHz, N = 432, R = 5 on 1000 samples; main PLL running | typ 90 ps | 82 |
| WS I2S clock jitter Jitter | Cycle to cycle at 48 KHz on 1000 samples; main PLL running | typ 400 ps | 82 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 192 MHz | min 0.15 · max 0.4 mA | 82 |
| PLLI2S power consumption on VDD IDD(PLLI2S) | VCO freq = 432 MHz | min 0.45 · max 0.75 mA | 82 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 192 MHz | min 0.3 · max 0.4 mA | 82 |
| PLLI2S power consumption on VDDA IDDA(PLLI2S) | VCO freq = 432 MHz | min 0.55 · max 0.85 mA | 82 |
| Supply current IDD | Write / Erase 8-bit mode, VDD = 1.7 V; TA = –40 to 125 °C | typ 5 mA | 84 |
| Supply current IDD | Write / Erase 16-bit mode, VDD = 2.1 V; TA = –40 to 125 °C | typ 8 mA | 84 |
| Supply current IDD | Write / Erase 32-bit mode, VDD = 3.3 V; TA = –40 to 125 °C | typ 12 mA | 84 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C conforming to JESD22-A114; Class 2 | max 2000 V | 88 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C conforming to ANSI/ESD STM5.3.1; Class II | max 500 V | 88 |
| Output low level voltage for an I/O pin VOL | CMOS port; IIO = +8 mA; 2.7 V ≤VDD ≤3.6 V | max 0.4 V | 92 |
| Output low level voltage for an I/O pin VOL | TTL port; IIO =+8 mA; 2.7 V ≤VDD ≤3.6 V | max 0.4 V | 92 |
| Output high level voltage for an I/O pin VOH | TTL port; IIO =+8 mA; 2.7 V ≤VDD ≤3.6 V | min 2.4 V | 92 |
| Output low level voltage for an I/O pin VOL | IIO = +20 mA; 2.7 V ≤VDD ≤3.6 V | max 1.3 V | 92 |
| Output low level voltage for an I/O pin VOL | IIO = +6 mA; 1.8 V ≤VDD ≤3.6 V | max 0.4 V | 92 |
| Output low level voltage for an I/O pin VOL | IIO = +4 mA; 1.7 V ≤VDD ≤3.6 V | max 0.4 V | 92 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD ≥ 2.70 V | max 4 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD≥ 1.7 V | max 2 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 2.70 V | max 8 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 00; CL = 10 pF, VDD ≥ 1.7 V | max 4 MHz | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 00; CL = 50 pF, VDD = 1.7 V to 3.6 V | max 100 ns | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD ≥ 2.70 V | max 25 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD ≥ 1.7 V | max 12.5 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD ≥ 2.70 V | max 50 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD ≥ 1.7 V | max 20 MHz | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD ≥2.7 V | max 10 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF, VDD ≥ 1.7 V | max 20 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD ≥ 2.70 V | max 6 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 01; CL = 10 pF, VDD ≥ 1.7 V | max 10 ns | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD ≥ 2.70 V | max 50 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD ≥ 1.7 V | max 25 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD ≥ 2.70 V | max 100 MHz | 93 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD ≥ 1.7 V | max 50 MHz | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD≥ 2.70 V | max 6 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 40 pF, VDD≥ 1.7 V | max 10 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD≥ 2.70 V | max 4 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 10; CL = 10 pF, VDD≥ 1.7 V | max 6 ns | 93 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 2.70 V | max 100 MHz | 93 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.7 V | max 50 MHz | 93 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD ≥ 2.70 V | max 180 MHz | 93 |
| Maximum frequency Fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD≥ 1.7 V | max 100 MHz | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 2.70 V | max 4 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF, VDD ≥ 1.7 V | max 6 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD≥ 2.70 V | max 2.5 ns | 93 |
| Output high to low level fall time and output low to high level rise time tf(IO)out/tr(IO)out | OSPEEDRy[1:0] = 11; CL = 10 pF, VDD≥ 1.7 V | max 4 ns | 93 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | - | min 10 ns | 93 |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 30 · typ 40 · max 50 kΩ | 94 |
| NRST Input filtered pulse VF(NRST) | - | max 100 ns | 94 |
| NRST Input not filtered pulse VNF(NRST) | VDD > 2.7 V | min 300 ns | 94 |
| Generated reset pulse duration TNRST_OUT | Internal Reset source | min 20 us | 94 |
| USB OTG FS transceiver startup time tSTARTUP | Guaranteed by design | max 1 us | 103 |
| USB OTG FS operating voltage VDD | - | min 3 · max 3.6 V | 103 |
| Differential input sensitivity VDI | I(USB_FS_DP/DM) | min 0.2 V | 103 |
| Differential common mode range VCM | Includes VDI range | min 0.8 · max 2.5 V | 103 |
| Single ended receiver threshold VSE | - | min 1.3 · max 2 V | 103 |
| Static output level low VOL | RL of 1.5 kΩ to 3.6 V | max 0.3 V | 103 |
| Static output level high VOH | RL of 15 kΩ to VSS | min 2.8 · max 3.6 V | 103 |
| PA11, PA12 (USB_FS_DM/DP) RPD | VIN = VDD | min 17 · typ 21 · max 24 kΩ | 103 |
| PA9 (OTG_FS_VBUS) RPD | VIN = VDD | min 0.65 · typ 1.1 · max 2 kΩ | 103 |
| PA11, PA12 (USB_FS_DM/DP) RPU | VIN = VSS | min 1.5 · typ 1.8 · max 2.1 kΩ | 103 |
| PA9 (OTG_FS_VBUS) RPU | VIN = VSS | min 0.25 · typ 0.37 · max 0.55 kΩ | 103 |
| Rise time tr | CL = 50 pF | min 4 · max 20 ns | 104 |
| Fall time tf | CL = 50 pF | min 4 · max 20 ns | 104 |
| Rise/ fall time matching trfm | tr/tf | min 90 · max 110 % | 104 |
| Output signal crossover voltage VCRS | - | min 1.3 · max 2 V | 104 |
| Power supply VDDA | VDDA −VREF+ < 1.2 V | min 1.7 · max 3.6 V | 104 |
| Positive reference voltage VREF+ | VDDA −VREF+ < 1.2 V; maximum VDDA | min 1.7 V | 104 |
| Negative reference voltage VREF- | - | typ 0 V | 104 |
| ADC clock frequency fADC | VDDA = 1.7 to 2.4 V | min 0.6 · typ 15 · max 18 MHz | 104 |
| ADC clock frequency fADC | VDDA = 2.4 to 3.6 V | min 0.6 · typ 30 · max 36 MHz | 104 |
| External trigger frequency fTRIG | fADC = 30 MHz, 12-bit resolution | max 1764 kHz | 104 |
| External trigger frequency fTRIG | - | max 17 1/fADC | 104 |
| Conversion voltage range VAIN | Minimum 0 (VSSA or VREF- tied to ground); maximum VREF+ | min 0 V | 104 |
| External input impedance RAIN | See Equation 1 for details | max 50 κΩ | 104 |
| Sampling switch resistance RADC | - | max 6 κΩ | 104 |
Pins, by the datasheet
56- 1 VBAT
- Backup-domain supply for RTC and backup registers; connect to VDD when no external battery or super-capacitor is present. · p. 37
- 2 PC13
- GPIO, EVENTOUT, RTC_TAMP1, RTC_OUT and RTC_TS. Output use is limited to 2 MHz and 30 pF; must not source current. · p. 37
- 7 NRST
- Reset pin with embedded weak pull-up resistor; EVENTOUT alternate function. · p. 38
- 8 PC0
- GPIO, EVENTOUT and ADC1_IN10. · p. 38
- 9 PC1
- GPIO, EVENTOUT and ADC1_IN11. · p. 38
- 10 PC2
- GPIO, SPI2_MISO, I2S2ext_SD, EVENTOUT and ADC1_IN12. · p. 38
- 11 PC3
- GPIO, SPI2_MOSI/I2S2_SD, EVENTOUT and ADC1_IN13. · p. 38
- 12 VSSA/VREF-
- Analog ground and negative reference supply. · p. 38
- 13 VDDA/VREF+
- Analog supply and positive reference supply. · p. 38
- 14 PA0
- GPIO, USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, ADC1_IN0 and WKUP. · p. 38
- 15 PA1
- GPIO, USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT and ADC1_IN1. · p. 38
- 16 PA2
- GPIO, USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT and ADC1_IN2. · p. 38
- 17 PA3
- GPIO, USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT and ADC1_IN3. · p. 39
- 18 VSS
- Ground supply. · p. 39
- 19 VDD
- Main supply. · p. 39
- 20 PA4
- GPIO, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT and ADC1_IN4. · p. 39
- 21 PA5
- GPIO, SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT and ADC1_IN5. · p. 39
- 22 PA6
- GPIO, SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT and ADC1_IN6. · p. 39
- 23 PA7
- GPIO, SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT and ADC1_IN7. · p. 39
- 24 PC4
- GPIO, EVENTOUT and ADC1_IN14. · p. 39
- 25 PC5
- GPIO, EVENTOUT and ADC1_IN15. · p. 39
- 26 PB0
- GPIO, TIM1_CH2N, TIM3_CH3, EVENTOUT and ADC1_IN8. · p. 39
- 27 PB1
- GPIO, TIM1_CH3N, TIM3_CH4, EVENTOUT and ADC1_IN9. · p. 39
- 28 PB2
- GPIO, EVENTOUT and BOOT1. · p. 39
- 29 PB10
- GPIO, SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3 and EVENTOUT. · p. 40
- 30 VCAP_1
- Internal regulator voltage; connect an external ceramic stabilization capacitor. · p. 40
- 31 VSS
- Ground supply. · p. 40
- 32 VDD
- Main supply. · p. 40
- 33 PB12
- GPIO, SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN and EVENTOUT. · p. 40
- 34 PB13
- GPIO, SPI2_SCK/I2S2_CK, TIM1_CH1N and EVENTOUT. · p. 40
- 35 PB14
- GPIO, SPI2_MISO, I2S2ext_SD, TIM1_CH2N and EVENTOUT. · p. 40
- 36 PB15
- GPIO, SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT and RTC_REFIN. · p. 40
- 37 PC6
- GPIO, I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6 and EVENTOUT. · p. 40
- 38 PC7
- GPIO, I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7 and EVENTOUT. · p. 40
- 39 PC8
- GPIO, USART6_CK, TIM3_CH3, SDIO_D0 and EVENTOUT. · p. 41
- 40 PC9
- GPIO, I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2 and EVENTOUT. · p. 41
- 41 PA8
- GPIO, I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1 and EVENTOUT. · p. 41
- 42 PA9
- GPIO, I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT and OTG_FS_VBUS. · p. 41
- 43 PA10
- GPIO, USART1_RX, TIM1_CH3, OTG_FS_ID and EVENTOUT. · p. 41
- 44 PA11
- GPIO, USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM and EVENTOUT. · p. 41
- 45 PA12
- GPIO, USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP and EVENTOUT. · p. 41
- 47 VSS
- Ground supply. · p. 41
- 48 VDD
- Main supply. · p. 41
- 50 PA15 (JTDI)
- GPIO, JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR and EVENTOUT. · p. 41
- 51 PC10
- GPIO, SPI3_SCK/I2S3_CK, SDIO_D2 and EVENTOUT. · p. 41
- 52 PC11
- GPIO, I2S3ext_SD, SPI3_MISO, SDIO_D3 and EVENTOUT. · p. 41
- 53 PC12
- GPIO, SPI3_MOSI/I2S3_SD, SDIO_CK and EVENTOUT. · p. 41
- 54 PD2
- GPIO, TIM3_ETR, SDIO_CMD and EVENTOUT. · p. 42
- 57 PB5
- GPIO, SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2 and EVENTOUT. · p. 42
- 58 PB6
- GPIO, I2C1_SCL, USART1_TX, TIM4_CH1 and EVENTOUT. · p. 42
- 59 PB7
- GPIO, I2C1_SDA, USART1_RX, TIM4_CH2 and EVENTOUT. · p. 42
- 60 BOOT0
- Dedicated BOOT0 input; VPP additional function. · p. 42
- 61 PB8
- GPIO, I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4 and EVENTOUT. · p. 42
- 62 PB9
- GPIO, SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5 and EVENTOUT. · p. 42
- 63 VSS
- Ground supply. · p. 43
- 64 VDD
- Main supply. · p. 43
- 2 layers63 × 49.2 mm
STM32F4XX
gianlucarenzi/STM32F4XX
A generic development board for the STM32F401 microcontroller.
42 parts2GPL-3.0 - 2 layers344.7 × 123.1 mm
- 4 layers76 × 76.9 mm
- 2 layers86.4 × 97.2 mm
- 2 layers102.4 × 98.6 mm
- 2 layers25.4 × 80.2 mm
RedPill board
simonyiszk/STM32-RedPill
STM32-based development board with integrated ST-LINK/V2 compatible programmer, to be used on SEM advanced courses.
63 parts1CERN-OHL-W-2.0 - 2 layers309.6 × 123.8 mm
Parts like it
8
GD32F103RBT6
LQFP-64(10x10)108MHz 128KB 12bit 2.6V~3.6V 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F103RCT6
LQFP-64(10x10)108MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M3 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)GD32F303RCT6
LQFP-64(10x10)120MHz 12bit 12bit 2.6V~3.6V 256KB 51 ARM Cortex-M4 FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)STM32F412RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 100MHz 12bit 256KB 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F403ARCT7
LQFP-64(10x10)-40℃~+105℃ 2.6V~3.6V 224Byte 240MHz 256KB 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)STM32F402RCT6
LQFP-64(10x10)LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G474RBT3
LQFP-64(10x10)-40℃~+125℃ 1.71V~3.6V 128KB 128KB 12bit 12bit 170MHz 32 Bit 52 ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AT32F403ARGT7
LQFP-64(10x10)-40℃~+105℃ 1MB 2.6V~3.6V 224Byte 240MHz 32 Bit 51 ARM Cortex-M4F Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F401RCT6?
Yes. The symbol is MCU_ST_STM32F4:STM32F401RCTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F401RCT6?
LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.
Where is the STM32F401RCT6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F401RCT6?
JLCPCB lists it as part C74524, with 469 in stock; the sellers' links on this page open their listings.
What can replace the STM32F401RCT6?
Parts like it in the library: the GD32F103RBT6 by GigaDevice, the GD32F103RCT6 by GigaDevice, the GD32F303RCT6 by GigaDevice and the STM32F412RET6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F401RCT6?
17 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.