8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0
2 layers27.3 × 27.9 mm
Accel mma84
tessel/t1-modules-kicad[UNMAINTAINED] Initial ports of t1 modules to kicad
- Size
- 27.3 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 49
- Tracks, vias
- 111, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Jul 2015
- Updated
- 23 Aug 2016
Overview
Accel mma84 is an open-source printed circuit board by tessel, from the tessel/t1-modules-kicad repository on GitHub. It is a 2-layer board of 27.3 × 27.9 mm with 10 parts on 8 nets, routed with 111 tracks and 3 vias.
It is built around the MMA8452QT and AT24CS01-STUM-T. Its parts include 3 capacitors, 3 resistors, 2 ICs and 2 connectors.
Main components
2README
README.md[UNMAINTAINED] This library does not have a maintainer. The source code and repository will be kept at this URL indefinitely. If you'd like to help maintain this codebase, create an issue on this repo explaining why you'd like to become a maintainer and tag @tessel/maintainers in the body.
t1-modules-kicad
libraries
sources:
library/tessel.pretty/QFN-*— https://github.com/KiCad/Housings_DFN_QFN.prettylibrary/freescale-ic.dcm— https://github.com/mcous/kicad-lib
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistors_SMD:R_0603 | R1, R2, R3 |
| 2 | 0.1uF | Capacitors_SMD:C_0603 | C1, C3 |
| 1 | 4.7uF | Capacitors_SMD:C_0603 | C2 |
| 1 | AT24CS01-STUM | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | IC1 |
| 1 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | J3 |
| 1 | CONN_01X10 | Socket_Strips:Socket_Strip_Angled_1x10 | J2 |
| 1 | MMA8452Q | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm | U1 |
Similar boards
- 4 layers93.3 × 60.3 mm
Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 12 layers165 × 102.7 mm
Data center rdimm ddr5-tester
antmicro/rdimm-ddr5-tester
FPGA-based DRAM tester supporting RDIMM DDR5 memories
797 parts44Apache-2.0 - 6 layers69.6 × 30 mm
Lpddr4-testbed
antmicro/lpddr4-testbed
Experimental breakout board for a signle 200-ball WFBGA LPDDR4 chip in SO-DIMM DDR4 form factor.
68 parts27Apache-2.0 - 2 layers48 × 49 mm
JBC Nano Hardware
Winkelkatze/jbc_nano_solder
DIY station for JBC nano (NT115) soldering irons
53 parts25MIT - 8 layers78 × 55 mm
Jetson AI Cam CopperPilot
CopperPilot/Jetson-AI-Cam-CopperPilot
A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.
305 parts15 - 6 layers69.6 × 40 mm
Lpddr5-testbed
antmicro/lpddr5-testbed
Experimental adapter intefacing a single LPDDR5 IC with FPGA-driven memory testers
163 parts14Apache-2.0 - 2 layers174 × 111 mm
Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0
Questions
How big is the Accel mma84 PCB?
It measures 27.3 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Accel mma84 use?
10 parts, built around the MMA8452QT and AT24CS01-STUM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accel mma84 KiCad files?
From the tessel/t1-modules-kicad repository on GitHub, at the commit this page was made from: the board is accel-mma84/accel-mma84.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accel mma84 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tessel before reusing the design.