
EtherKraken
karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.

Custom 3RRS Parallel Manipulator + CV to balance a ball!
Ball balancer is an open-source printed circuit board by tecknet-gg, from the tecknet-gg/ball-balancer repository on GitHub. It is a 2-layer board of 150.8 × 146.5 mm with 11 parts on 58 nets, routed with 102 tracks and 6 vias.
It is built around the RASPBERRY PI ZERO 2 W. Its parts include 3 diodes, 2 ICs and 1 connector. It belongs with the Raspberry Pi (Linux) boards of this library.
A custom 3RRS parallel manipulator that leverages CV to locate and mainpulate a ball on a 2D planar surface.
Build instructions can be found in the BUILD.md file, and instructions for running my firmware can be found in the FIRMWARE.md file. If I do get time, I will eventually post this on Instructables!
Still some tuning needed, but the hardware totally works, and it even balances it fully sometimes :]
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 1 | 815 | pca9685:MODULE_815 | U2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | LOGO | pics:scott1 | G*** |
| 1 | RASPBERRY_PI_ZERO_2_W | RASPBERRY_PI_ZERO_2_W:MODULE_RASPBERRY_PI_ZERO_2_W | U1 |

karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.


dihermos/GaiaBeronia
Gaia Beronia is an inspired on Flipper Zero embeeded system. It uses a system based on Python running on Linux in a Raspberry Pi Zero 2W.

impatrq/TEARIS
TEARIS (TEA + auris, latín: oído) es un sistema innovador de auriculares con cancelación activa de ruido adaptativa, creado para personas con Trastorno del Espectro Autista (TEA), PTSD, fibromialgia, migrañas crónicas y…


Sierra-College-Robotics-Club/GlowClock
PCB and Code for Sierra College Robotics Club Glow Clock

Stogalosu/Smart-Chess-Board
A smart chess board that connects to your phone and automatically makes moves

It measures 150.8 × 146.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the RASPBERRY PI ZERO 2 W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tecknet-gg/ball-balancer repository on GitHub, at the commit this page was made from: the board is pcb/Ball Balancer.kicad_pcb and its schematic pcb/ballbalancerschm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tecknet-gg before reusing the design.