2 layers87.6 × 100.8 mm
EtherKraken
karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.
84 parts3Apache-2.0
2 layers69.5 × 68.5 mm
RP0-HandHeld
OndrejVac/RP0-HandHeld1Raspberry Pi Zero 2 gaming handheld
- Size
- 69.5 × 68.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 44
- Pads
- 73
- Tracks, vias
- 182, 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 May 2025
- Updated
- 8 Sep 2025
Overview
RP0-HandHeld is an open-source printed circuit board by OndrejVac, from the OndrejVac/RP0-HandHeld repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.5 × 68.5 mm with 22 parts on 44 nets, routed with 182 tracks and 4 vias.
It is built around the RASPBERRY PI ZERO 2 W. Its parts include 13 connectors, 4 capacitors, 4 resistors and 1 IC. It belongs with the Raspberry Pi (Linux) boards of this library.
Main components
1README
README.mdRP0-HandHeld
This project was made for HackClub Highway
Raspberry Pi Zero 2 gaming handheld, that runs Retro Pie...
I always wanted gaming console that has retro games in it so I made this!
Repository Layout
The repo is structured as follows:
- PCB-related KiCad files in the
PCB/ - KiCAD case design in
CAD/ - Software related stuff is located in
Software/ - For a rough BOM, see
BOM.csv - For my development log, see
JOURNAL.md - HackClub Readme is located in
README-original.md
[!CAUTION] The physical version of the console is not finished yet! The tutorial will be made after the completation.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | Conn_01x01_Pin | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13 |
| 2 | 0.01 uf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 10 uf | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3, C4 |
| 2 | 150 Ohm | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1, R2 |
| 2 | 270 Ohm | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R3, R4 |
| 1 | RASPBERRY_PI_ZERO_2_W | RASPBERRY_PI_ZERO_2_W:MODULE_RASPBERRY_PI_ZERO_2_W | U1 |
Similar boards
- 2 layers56.1 × 53.6 mm
- 2 layers75 × 55.4 mm
GaiaBeronia
dihermos/GaiaBeronia
Gaia Beronia is an inspired on Flipper Zero embeeded system. It uses a system based on Python running on Linux in a Raspberry Pi Zero 2W.
31 parts1Apache-2.0 - 2 layers90 × 39 mm
TEARIS
impatrq/TEARIS
TEARIS (TEA + auris, latín: oído) es un sistema innovador de auriculares con cancelación activa de ruido adaptativa, creado para personas con Trastorno del Espectro Autista (TEA), PTSD, fibromialgia, migrañas crónicas y…
5 parts1 - 2 layers115.6 × 67.9 mm
GlowClockPCB
Sierra-College-Robotics-Club/GlowClock
PCB and Code for Sierra College Robotics Club Glow Clock
52 parts1 - 2 layers150 × 195 mm
SCB
Stogalosu/Smart-Chess-Board
A smart chess board that connects to your phone and automatically makes moves
52 parts1 - 2 layers30.2 × 77.8 mm
- 2 layers100 × 74 mm
HandheldGameConsole
ArnaanShah/GameboyGo
A handheld console for playing retro games with an interesting sliding mechanism.
28 partsMIT
Questions
How big is the RP0-HandHeld PCB?
It measures 69.5 × 68.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RP0-HandHeld use?
22 parts, built around the RASPBERRY PI ZERO 2 W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP0-HandHeld KiCad files?
From the OndrejVac/RP0-HandHeld repository on GitHub, at the commit this page was made from: the board is PCB/RP0-HandHeld.kicad_pcb and its schematic PCB/RP0-HandHeld.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP0-HandHeld design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).