Skip to the content
2 layers115.6 × 67.9 mmGlowClockPCB, the printed circuit board in 3D

PCB and Code for Sierra College Robotics Club Glow Clock

Size
115.6 × 67.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
75
Pads
272
Tracks, vias
360, 274
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Sep 2024
Updated
18 Sep 2026

Overview

GlowClockPCB is an open-source printed circuit board by Sierra-College-Robotics-Club, from the Sierra-College-Robotics-Club/GlowClock repository on GitHub. It is a 2-layer board of 115.6 × 67.9 mm with 52 parts on 75 nets, routed with 360 tracks and 274 vias.

It is built around the DS3231MZ/V+ and RASPBERRY PI ZERO 2 W. Its parts include 9 connectors, 8 capacitors, 6 resistors, 6 switches and 3 ICs. It belongs with the RP2040 and Raspberry Pi (Linux) boards of this library.

Main components

2

README

GlowClockPCB/README.md

GlowClock PCB

This PCB was designed to, in addition to supporting the glowclock, be a modular prototyping board for various other projects as well, with all unused GPIO broken out and accessible.

V1.0 boards have been produced and are in active use, V1.1 boards are currently under development.

Errata

V1.0

  • The second motor-driver board slot (A2) is not fully populated with the required control signals
  • The Raspberry Pi 40 pin header (not to be confused with the Pi Pico's socket) has 0.2mm hole spacing instead of the traditional 2.54mm spacing
  • The i2c SDA pin for the I2C_LCD connector is connected to GPIO22 instead of GPIO20. This can be resolved by cutting the trace and green-wiring to the Pi Pico pin 26.

Parts

52
QtyValueFootprintReferences
5CCapacitor_SMD:C_0603_1608MetricC3, C4, C5, C6, C7
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
4RResistor_SMD:R_0603_1608MetricR1, R2, R3, R4
4SPI_BRIDGEJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP3, JP4, JP5, JP6
3100µFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2, C8
2I2C_BRIDGEJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP7, JP8
2LED_SmallLED_SMD:LED_0603_1608MetricD1, D2
2Pololu_Breakout_DRV8825Module:Pololu_Breakout-16_15.2x20.3mmA1, A2
2R_SmallResistor_SMD:R_0603_1608MetricR5, R6
2UART_BRIDGEJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP1, JP2
1ADC_OUTConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ9
1BTN_BACKButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW6
1BTN_DOWNButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW3
1BTN_LEFTButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW2
1BTN_OKButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW5
1BTN_RIGHTButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW4
1BTN_UPButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1
1DS3231MZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1I2C_LCDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1LED_OUT_1Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ1
1LED_OUT_2Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ2
1LED_OUT_3Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ3
1LED_OUT_4Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ4
1Motor_1_OutConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ6
1Motor_2_OutConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ7
1POWER_INConnector_TE-Connectivity:TE_MATE-N-LOK_350211-1_1x04_P5.08mm_VerticalJ5
1RTC_BATBattery:BatteryHolder_LINX_BAT-HLD-012-SMTBT1
1RaspberryPi_Pico_WRaspberryPi_Pico:RaspberryPi_Pico_CommonU1
1Raspberry_Pi_Zero_2_WConnector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalU2
1StepperMode0Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP9
1StepperMode1Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP10
1StepperMode2Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP11

Similar boards

  • 2 layers87.6 × 100.8 mmEtherKraken, the printed circuit board in 3D

    EtherKraken

    karmakrafts/EtherKraken

    A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.

    84 parts3Apache-2.0
  • 2 layers56.1 × 53.6 mmYashica8 ver0.1.1, the printed circuit board in 3D

    Yashica8 ver0.1.1

    airpocket-soundman/motocamera

    The project to digitize Pathé's MotoCamera.

    24 parts1
  • 2 layers75 × 55.4 mmGaiaBeronia, the printed circuit board in 3D

    GaiaBeronia

    dihermos/GaiaBeronia

    Gaia Beronia is an inspired on Flipper Zero embeeded system. It uses a system based on Python running on Linux in a Raspberry Pi Zero 2W.

    31 parts1Apache-2.0
  • 2 layers90 × 39 mmTEARIS, the printed circuit board in 3D

    TEARIS

    impatrq/TEARIS

    TEARIS (TEA + auris, latín: oído) es un sistema innovador de auriculares con cancelación activa de ruido adaptativa, creado para personas con Trastorno del Espectro Autista (TEA), PTSD, fibromialgia, migrañas crónicas y…

    5 parts1
  • 2 layers69.5 × 68.5 mmRP0-HandHeld, the printed circuit board in 3D

    RP0-HandHeld

    OndrejVac/RP0-HandHeld

    Raspberry Pi Zero 2 gaming handheld

    22 parts1MIT
  • 2 layers150 × 195 mmSCB, the printed circuit board in 3D

    SCB

    Stogalosu/Smart-Chess-Board

    A smart chess board that connects to your phone and automatically makes moves

    52 parts1
  • 2 layers30.2 × 77.8 mmLaika, the printed circuit board in 3D

    Laika

    AeybelV/Laika_PCB

    PCB for the Laika Flight Computer

    22 parts
  • 2 layers100 × 74 mmHandheldGameConsole, the printed circuit board in 3D

    HandheldGameConsole

    ArnaanShah/GameboyGo

    A handheld console for playing retro games with an interesting sliding mechanism.

    28 partsMIT

Questions

How big is the GlowClockPCB PCB?

It measures 115.6 × 67.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GlowClockPCB use?

52 parts, built around the DS3231MZ/V+ and RASPBERRY PI ZERO 2 W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GlowClockPCB KiCad files?

From the Sierra-College-Robotics-Club/GlowClock repository on GitHub, at the commit this page was made from: the board is GlowClockPCB/GlowClockPCB.kicad_pcb and its schematic GlowClockPCB/GlowClockPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the GlowClockPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sierra-College-Robotics-Club before reusing the design.