
SCB normal
Stogalosu/Smart-Chess-Board
A smart chess board that connects to your phone and automatically makes moves

A smart chess board that connects to your phone and automatically makes moves
SCB is an open-source printed circuit board by Stogalosu, from the Stogalosu/Smart-Chess-Board repository on GitHub. It is a 2-layer board of 150 × 195 mm with 52 parts on 73 nets, routed with 669 tracks and 128 vias.
It is built around the SN74HCT245DWR(LX), RASPBERRY PI ZERO 2 W and TBD62083AFWG,EL, with the TCA9555PWR(UMW) among its other parts. Its parts include 20 ICs, 9 connectors, 6 capacitors, 3 inductors and 2 resistors. It belongs with the Raspberry Pi (Linux) boards of this library.
A smart chess board that connects to your phone and automatically makes the moves you and your opponent make on the screen. It can even play against you! It works by moving a magnet under the board, thus also moving the pieces which will have magnets in them.
Because I had this idea in the back if my head for a long time and I thought this was the perfect time. Also, I wanted a challenge, something new.
Well, I haven't thought it through, but my idea is to also make an Android app that connects through Bluetooth with the board so you can visualise the moves there, as well as make new ones. I also hope to allow players to make their own moves on the board using the Hall sensors that are in the board.
There is no firmware... yet. I've just finished assembling the board and will start working on the firmware soon.
This project has already been submitted to Blueprint a few months ago. In the meantime, I've made some small additions and adjustments that I've recorded using Lapse. These include:
Print all pieces. Make sure to follow the color scheme of a real chess board and keep track of which piece is which, as some of the screw holes won't align if their positions are wrong. Slide together the 4 pieces that make up the bottom of the board while inserting the y-axis rods, the x-axis idlers and the x-axis guiderail. Screw in the motor holders and the motors. Cut your belt into 2 pieces. Slide them into the x-axis carriage and fit the belts on the pulleys as described in the following image. Screw in the x-axis carriage. Attach the servomotor.
Solder the pieces onto the PCB and solder them together by connecting the pins. Connect the botton pieces of the play surface with the little pins. Fit the PCBs into it, then screw in each wall piece while keeping track of its position. Connect the motor cables and the Raspberry Pi.
At the end, cover the bottom with the play surface and screw in all the screws. Done!
Build:
3D Render:
PCB that has the Raspberry Pi on it:
The other PCB, which will be used 3 times to form a grid:
Wiring diagrams for the special PCB:
Wiring diagram for tileable PCB:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | ~ | Package_TO_SOT_SMD:TSOT-23 | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U14, U15, U16, U17 |
| 4 | Conn_01x05 | Connector_Pads:Connector_5_Pads | J1, J2, J4, J6 |
| 3 | C_Polarized | TAJC107K010RNJ:CAPPM6032X280N | C3, C4, C5 |
| 3 | L | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1, L2, L3 |
| 2 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C6 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13, J14 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3, J5 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | C1 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | RASPBERRY_PI_ZERO_2_W | Raspberry Pi Zero 2W:MODULE_RASPBERRY_PI_ZERO_2_W | U20 |
| 1 | R_Network08 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | SN74HCT245DWR | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U13 |
| 1 | TBD62083AFWG | TBD62083AFNG:SSOP18-P-225-0p65_TOS | U19 |
| 1 | TCA9555PWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U18 |
The 41 most common of 52 parts.

Stogalosu/Smart-Chess-Board
A smart chess board that connects to your phone and automatically makes moves


WestianPKl/pcb-docs
A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…


coelacant1/Protogen-Electronics
SmartMatrix SmartLED Shield breakout for Protogen hardware




It measures 150 × 195 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the SN74HCT245DWR(LX), RASPBERRY PI ZERO 2 W, TBD62083AFWG,EL and TCA9555PWR(UMW). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Stogalosu/Smart-Chess-Board repository on GitHub, at the commit this page was made from: the board is PCB/SCB.kicad_pcb and its schematic PCB/SCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Stogalosu before reusing the design.