Skip to the content
2 layers99.7 × 55.2 mmC64 Arcade, the printed circuit board in 3D

WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

Size
99.7 × 55.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
44
Pads
155
Tracks, vias
455, 50
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Dec 2020
Updated
14 Jan 2025

Overview

C64 Arcade is an open-source printed circuit board by tebl, from the tebl/C64-JoyKEY repository on GitHub. It is a 2-layer board of 99.7 × 55.2 mm with 49 parts on 44 nets, routed with 455 tracks and 50 vias.

Its parts include 16 connectors, 15 resistors, 4 diodes and 1 switch. It belongs with the retro computing and games and keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

C64 JoyKEY

The C64 JoyKEY was born out of the desire to build my own joystick, and after having a look at the various options available I chose to build one using Cherry MX keyboard switches. They are around a dollar per piece, so after getting it all to work properly on my beloved Commodore 64 I looked into using it with a whole selection of vintage computer systems as well. There are two main versions of the C64 JoyKEY, the keyboard-variant already described and a board designed for use with Sanwa arcade parts instead.

Last build Last arcade

With options to handle multiple types of systems comes complexity, you'll have to make a few decisions on what you want out of the C64 JoyKEY. Do I only want to use it as a joystick replacement on vintage systems, ideally with 2-3 fire buttons where supported? If so, then you won't need the Arduino Pro Micro.

Want to use it on a modern system as a WASD-style keyboard or a gamepad, then install it - a common use of these types of devices is as a macro-keyboard or a stream-deck. Note that compared to many similar solutions, the microcontroller is not required for use with any of the vintage systems - the adapters actually follow the original circuit descriptions for controllers used with the actual vintage computers. What that means is that there is truly no chance of lag added by the controller. Ever.

The pictures below show the unit when connected to my Commodore 64, including the jumper settings used with it. As I've tried to keep things as close to the standard usually associated with Atari-style joysticks, there are two joystick connectors - this is because a lot of the Commodore 64 games supported using a second joystick for specific game functions.

Commodore 64 C64 Configuration

As with most C64 games port 2 is the one to use, port 1 is just there to connect additional fire buttons. When in doubt, just connect a cable for port 2 and you should have a good time. This was labelled after the way the controller is used on the Commodore 64.

Getting one

I won't be selling these, so if you want one you will probably have to build it yourself (or call your favourite friend, ideally someone with a reasonable quality soldering iron). I've created a separate documents on building a C64 JoyKEY, this is also where you'll find the BOM for this project (a list of needed parts and links to where PCBs can be ordered).

As with all things you're soldering together by yourself, the one who soldered it takes responsibility for it. I'll try answer any opened tickets as far as I am able, but know that this is a hobby-grade project and I might be busy on spending the little energy I have on other things (be patient, check out the schematic while you wait).

Setting it up

The C64 JoyKEY has a handful of jumpers that need to be set correctly in order to: A - function, B - not destroy your precious vintage computer and/or consoles. The necessary details have been put into a separate configuration-document, check it out for some information on the systems I've attempted to use the C64 JoyKEY with.

Parts

49
QtyValueFootprintReferences
1110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5, R6, R9, R14, R15, R16, R17, R18, R19, R20, R21
4Mountingmounting:M3_pinM1, M2, M3, M4
2270Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4
2DEFAULT_FWConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP4, JP6
11n4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD3
11n4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD4
1ARD_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP9
1Arduino_Pro_Microarduino_pro_micro:Arduino_Pro_MicroA1
1DIR_LEFTConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ15
1DIR_RIGHTConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ3
1DOWNConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ6
1EXT_PWRConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ14
1F2_POLConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP1
1F3_POLConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP2
1FIRE3_SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJP3
1LEFTConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ7
1P1_FIRE1Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ11
1P1_FIRE2Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ12
1P1_FIRE3Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ13
1P1_FIRE4Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ16
1P2_FIRE1Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ8
1P2_FIRE2Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ9
1P2_FIRE3Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ10
1PWRConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalD1
1Port_1C64 IDC:IDC_JoystickJ1
1Port_2C64 IDC:IDC_JoystickJ2
1RESETButton_Switch_THT:SW_PUSH_6mmSW8
1RIGHTConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ5
1SYSConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalD2
1UPConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ4
1UP_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP8
1VCC_ENConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP5

More from tebl/C64-JoyKEY

12
  • 2 layers99.7 × 74.9 mmC64 Joykey 2040, the printed circuit board in 3D

    C64 Joykey 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    69 parts27
  • 2 layers99.7 × 74.9 mmC64 Joykey, the printed circuit board in 3D

    C64 Joykey

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    62 parts27
  • 2 layers58.4 × 38.1 mmAmiga CD32, the printed circuit board in 3D

    Amiga CD32

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    30 parts27
  • 2 layers81.9 × 52.7 mmArcade 2040, the printed circuit board in 3D

    Arcade 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    29 parts27
  • 2 layers58.4 × 38.1 mmNEC PC Engine, the printed circuit board in 3D

    NEC PC Engine

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    26 parts27
  • 2 layers58.4 × 43.8 mmGameport, the printed circuit board in 3D

    Gameport

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    24 parts27
  • 2 layers70.7 × 46.7 mmAdapter 9 from 2040, the printed circuit board in 3D

    Adapter 9 from 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmSega Mega Drive, the printed circuit board in 3D

    Sega Mega Drive

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmNES, the printed circuit board in 3D

    NES

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    20 parts27
  • 2 layers29.2 × 31.8 mmAtari 7800, the printed circuit board in 3D

    Atari 7800

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    10 parts27
  • 2 layers10.4 × 55.2 mmC64 SkeletonKey, the printed circuit board in 3D

    C64 SkeletonKey

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    5 parts27
  • 2 layers29.2 × 18.4 mmSega Master System, the printed circuit board in 3D

    Sega Master System

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    4 parts27

Similar boards

  • 2 layers173 × 122.5 mmCapBank, the printed circuit board in 3D

    CapBank

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    49 parts915
  • 2 layers85.1 × 49.8 mmAvrcraft m644, the printed circuit board in 3D

    Avrcraft m644

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    49 parts471
  • 2 layers50 × 90 mmMouse, the printed circuit board in 3D

    Mouse

    biomurph/Mouse

    Repository for Open Source Mouse Firmware and Hardware

    49 parts362MIT
  • 2 layers126.4 × 15.2 mmV5probe, the printed circuit board in 3D

    V5probe

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    49 parts332
  • 2 layers43 × 92.3 mmDSKY driver, the printed circuit board in 3D

    DSKY driver

    benkrasnow/DSKY_EL_replica

    Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

    49 parts261MIT
  • 2 layers58 × 110 mmUtils output ui, the printed circuit board in 3D

    Utils output ui

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    49 parts222
  • 2 layers61 × 42.5 mmShutter, the printed circuit board in 3D

    Shutter

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    49 parts208
  • 2 layers31 × 38 mmEmbedded, the printed circuit board in 3D

    Embedded

    blakesmith/embedded

    Blake's embedded projects

    49 parts167

Questions

How big is the C64 Arcade PCB?

It measures 99.7 × 55.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the C64 Arcade use?

49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C64 Arcade KiCad files?

From the tebl/C64-JoyKEY repository on GitHub, at the commit this page was made from: the board is C64 Arcade/C64 Arcade.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the C64 Arcade design in my own project?

Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.