Skip to the content
4 layers63.5 × 26.1 mmBwlr1f, the printed circuit board in 3D
Size
63.5 × 26.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
69
Nets
64
Pads
265
Tracks, vias
367, 168
Pours
16
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Dec 2023
Updated
28 Aug 2024

Overview

Bwlr1f is an open-source printed circuit board by teapotlaboratories, from the teapotlaboratories/bwlr1f repository on GitHub. It is a 4-layer board of 63.5 × 26.1 mm with 69 parts on 64 nets, routed with 367 tracks and 168 vias.

It is built around the BME688, NBM7100ABQX and RAK3172-SIP, with the RV-3028-C7, ZD24C08A-STGMT and ESD5651N-2/TR among its other parts. Its parts include 25 capacitors, 10 resistors, 8 diodes, 6 inductors and 5 ICs.

Main components

12

Parts

69
QtyValueFootprintReferences
10100nCapacitor_SMD:C_0402_1005MetricC5, C6, C7, C8, C10, C11, C14, C22, C23, C24
9ProgPinTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9
8ESD5651NDiode_SMD:D_SOD-882D1, D2, D3, D4, D5, D6, D7, D8
61uCapacitor_SMD:C_0402_1005MetricC2, C12, C13, C15, C19, C25
410KResistor_SMD:R_0402_1005MetricR3, R4, R11, R12
3120Inductor_SMD:L_0402_1005MetricL1, L3, L4
34u7Capacitor_SMD:C_0402_1005MetricC1, C3, C4
2100KResistor_SMD:R_0402_1005MetricR5, R6
21KResistor_SMD:R_0402_1005MetricR7, R8
24K7Resistor_SMD:R_0402_1005MetricR1, R2
2Battery_Cellbwlr1f:BAT-SMD_MY-2032-12BT1, BT2
2DNPCapacitor_SMD:C_0603_1608MetricC18, C20
10Inductor_SMD:L_0603_1608MetricL6
110uCapacitor_SMD:C_0603_1608MetricC17
115ubwlr1f:74404042150L5
115uInductor_SMD:L_0805_2012MetricL2
122uCapacitor_SMD:C_1206_3216MetricC21
1470nCapacitor_SMD:C_0402_1005MetricC9
1470uCapacitor_Tantalum_SMD:CP_EIA-7343-40_Kemet-YC16
1AntennaRF_Antenna:Texas_SWRA416_868MHz_915MHzAE1
1BME688bwlr1f:BME680-PSON80P300X300X100-8NU4
1Conn_01x02bwlr1f:Battery_PadJ1
1LOGObwlr1f:TeapotLogo4mmG***
1NBM7100ABQXbwlr1f:NBM7100ABQXU2
1OUTPUT_SELECTJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1RAK3172-SIPbwlr1f:RAK3172-SiP_LGA75U1
1RV-3028-C7Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mmU5
1ZD24C08APackage_TO_SOT_SMD:SOT-23-5U3

More from teapotlaboratories/bwlr1f

1
  • 2 layers61.2 × 26.1 mmBwlr1f prog, the printed circuit board in 3D

    Bwlr1f prog

    teapotlaboratories/bwlr1f

    44 parts

Similar boards

  • 4 layers56 × 52 mmEdgeLink S3 Cellular, the printed circuit board in 3D

    EdgeLink S3 Cellular

    CDonohoe-Designs/EdgeLink_S3_Cellular

    EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.

    114 parts
  • 4 layers163.1 × 116.8 mmOpenParol, the printed circuit board in 3D

    OpenParol

    OpenParol/OpenParol-Board

    Open-source project for a 6-DOF robotic arm controller

    242 partsGPL-3.0
  • 4 layers66 × 142 mmHandset, the printed circuit board in 3D

    Handset

    JeremyLakeyJr/mesh-phone

    OWASSO-1 DIY ESP32-S3 phone KiCad revF PCB project

    242 partsMIT
  • 4 layers30 × 40.8 mmDrone fc, the printed circuit board in 3D

    Drone fc

    neilpate/Drone

    A learning project: build a quadcopter from scratch — own hardware, own firmware, no existing flight stack.

    37 partsApache-2.0
  • 4 layers38.4 × 128.5 mmPlantpal, the printed circuit board in 3D

    Plantpal

    rajeev2705/PROJECTS

    Welcome to my PCB projects repository! This space is dedicated to documenting my journey in designing, creating, and improving printed circuit boards (PCBs).

    127 parts
  • 2 layers34 × 34 mmKm-2032, the printed circuit board in 3D

    Km-2032

    kiisu-io/kiisu-smol

    Hardware design files, schematics, and 3D models for KIISU SMOL — modular networking development board

    9 parts6CERN-OHL-S-2.0
  • 2 layers30 × 30 mmPocketradio, the printed circuit board in 3D

    Pocketradio

    alx-alexpark/radio-keychain

    It uses the connected headphones as an antenna, and is powered off a CR2032 coin cell. The FM tuner used is the Si4702, which supports the 76-108MHz frequency range.

    36 parts
  • 4 layers59.4 × 30 mmPcbV4, the printed circuit board in 3D

    PcbV4

    Max-Gulda/PulseBand_PCB

    68 parts

Questions

How big is the Bwlr1f PCB?

It measures 63.5 × 26.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Bwlr1f use?

69 parts, built around the BME688, NBM7100ABQX, RAK3172-SIP and RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bwlr1f KiCad files?

From the teapotlaboratories/bwlr1f repository on GitHub, at the commit this page was made from: the board is hardware/main/kicad/bwlr1f.kicad_pcb and its schematic hardware/main/kicad/bwlr1f.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bwlr1f design in my own project?

Its repository states no licence, so its author keeps all rights: ask teapotlaboratories before reusing the design.