6 layers
Pc healthypi move sensor v9
Protocentral/healthypi-move-hw
Hardware files for the HealthyPi Move
124 parts160MIT
4 layers59.4 × 30 mm
- Size
- 59.4 × 30 mm
- Copper layers
- 4
- Thickness
- 2.63 mm
- Parts
- 68
- Nets
- 78
- Pads
- 252
- Tracks, vias
- 957, 99
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Mar 2026
- Updated
- 28 May 2026
Overview
PcbV4 is an open-source printed circuit board by Max-Gulda, from the Max-Gulda/PulseBand_PCB repository on GitHub. It is a 4-layer board of 59.4 × 30 mm with 68 parts on 78 nets, routed with 957 tracks and 99 vias.
It is built around the W25Q256JVEIQ, MAX30001CWV+T and NPM1100-QDAA-R, with the 19-237/R6GHBHC-A07/2T, KMR221GLFS and MY-2032-12 among its other parts. Its parts include 27 capacitors, 16 resistors, 6 ICs, 5 connectors and 1 diode.
Main components
8
W25Q256JVEIQ
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 133MHz 2.7V~3.6V 20 Years 256Mbit 700us SPI WSON-8-EP(6x8) NOR FLASH ROHSWinbond ElecNOR FLASH
MAX30001CWV+T
WLP-30(2.7x2.9)0Hz~12MHz、32.768kHz 0℃~+70℃ 1.1V~2V 18 1V 2 512Hz 512Hz 97.7dB Programmable gain、ESD protection SPI WLP-30(2.7x2.9) Analog Front End (AFE) ROHSMaxim Integrated (Analog Devices)Analog Front End (AFE)NPM1100-QDAA-R
QFN-24(4x4)-40℃~+85℃ 1 4.1V~6.7V Lithium-ion/Polymer QFN-24(4x4) Power Management - Specialized ROHSNordic SemiconBattery Management
19-237/R6GHBHC-A07/2T
SMD-4P,1.6x1.6mm120° Common Anode SMD-4P,1.6x1.6mm RGB LEDs ROHSEverlight ElectronicsRGB LEDs
KMR221GLFS
SMD,4.6x2.8mm-40℃~+85℃ 1.9mm 2.8mm 2N 32V 4.6mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.6x2.8mm Tactile Switches ROHSC&KTactile SwitchesMY-2032-12
--25~85℃ Battery buckle CR2032 Nickel plated Phosphor bronze - ROHSMYOUNGButton And Strip Battery Connector
SDFL1608Q2R2KTF
06031.15Ω 15mA 2.2uH 35@10MHz 50MHz ±10% 0603 Inductors (SMD) ROHSSunlordInductors (SMD)
USBC-0032IPX8-00
SMD-30℃~+85℃ 1 20V 3A 5 thousand cycles 6P Black Female Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSSHOU HANUSB Connectors
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C10, C13, C16, C20, C21, C23 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C12, C14, C18, C26 |
| 4 | 10pF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C17, C30 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R18, R19 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C11, C15, C24 |
| 2 | 1M | Resistor_SMD:R_0402_1005Metric | R11, R14 |
| 2 | 200 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 47nF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 14k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 19-237/R6GHBHC-A07/2T | easyeda2kicad:LED-ARRAY-SMD_4P-L1.6-W1.6-BL-CW | LED1 |
| 1 | 1M5 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 2nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 324k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 47pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | DMC2400UV-7 | easyeda2kicad:SOT-563_L1.6-W1.2-P0.50-LS1.6-BL | Q1 |
| 1 | GND | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J4 |
| 1 | KMR221GLFS | easyeda2kicad:KEY-SMD_KMR2XXGXXX | SW1 |
| 1 | LOGO | easyeda2kicad:aer_logo | G*** |
| 1 | LSM6DSOXTR | easyeda2kicad:LGA-14L_L3.0-W2.5-P0.50-TL | U1 |
| 1 | MAX30001CWV+T | easyeda2kicad:WLP-30_L2.7-W2.9-R5-C6-P0.50-TL | U2 |
| 1 | MY-2032-12 | easyeda2kicad:BAT-SMD_MY-2032-12 | BT1 |
| 1 | NPM1100-QDAA-R | easyeda2kicad:QFN-24_L4.0-W4.0-P0.50-TL-EP2.7 | U4 |
| 1 | NRESET | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J3 |
| 1 | SDFL1608Q2R2KTF | easyeda2kicad:L0603 | L1 |
| 1 | SWDCLK | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J6 |
| 1 | SWDIO | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J7 |
| 1 | TLV70018DCKR | TLV70018DCKR:SOT65P210X110-5N | U6 |
| 1 | USBC-0032IPX8-00 | easyeda2kicad:TYPE-C-USB-SMD_USBC-0032IPX8-00 | USB2 |
| 1 | VDD | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J5 |
| 1 | W25Q256JVEIQTR | easyeda2kicad:WSON-8_L8.0-W6.10-P1.27-BL-EP | U9 |
| 1 | ~ | holyIOT:holyIOT | U3 |
The 67 most common of 68 parts.
Similar boards
- 4 layers184.1 × 132.9 mm
Board 2
Triksha-health/Hardware
Contains KiCAD files of all the PCB Boards for the Health Tracker System
170 parts - 2 layers34 × 34 mm
Km-2032
kiisu-io/kiisu-smol
Hardware design files, schematics, and 3D models for KIISU SMOL — modular networking development board
9 parts6CERN-OHL-S-2.0 - 2 layers30 × 30 mm
Pocketradio
alx-alexpark/radio-keychain
It uses the connected headphones as an antenna, and is powered off a CR2032 coin cell. The FM tuner used is the Si4702, which supports the 76-108MHz frequency range.
36 parts - 4 layers63.5 × 26.1 mm
- 4 layers50 × 50 mm
- 6 layers38 × 39 mm
- 4 layers66 × 42 mm
Questions
How big is the PcbV4 PCB?
It measures 59.4 × 30 mm and has 4 copper layers, 2.63 mm thick.
What parts does the PcbV4 use?
68 parts, built around the W25Q256JVEIQ, MAX30001CWV+T, NPM1100-QDAA-R and 19-237/R6GHBHC-A07/2T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PcbV4 KiCad files?
From the Max-Gulda/PulseBand_PCB repository on GitHub, at the commit this page was made from: the board is pcbV4.kicad_pcb and its schematic npm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PcbV4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Max-Gulda before reusing the design.