

- Size
- 38 × 39 mm
- Copper layers
- 6
- Thickness
- 0.79 mm
- Parts
- 61
- Nets
- 75
- Pads
- 258
- Tracks, vias
- 236, 63
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 26 Sep 2023
- Updated
- 1 Feb 2026
Overview
Watch is an open-source printed circuit board by cruzsbrian, from the cruzsbrian/smartwatch repository on GitHub. It is a 6-layer board of 38 × 39 mm with 61 parts on 75 nets, routed with 236 tracks and 63 vias.
It is built around the NRF52833-QDAA-R, DRV2603RUN and LIS3MDL, with the BMA456, MAX17048G+T10 and NPM1100-QDAA-R among its other parts. Its parts include 29 capacitors, 6 resistors, 6 ICs, 5 inductors and 2 connectors. It belongs with the wearables boards and the nRF52 and nRF5x boards of this library.
Main components
10NRF52833-QDAA-R
QFN-40-EP(5x5)QFN-40-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSNordic SemiconMicrocontrollers (MCU/MPU/SOC)DRV2603RUN
QFN-10(2x2)-40℃~+85℃ 2.5V~5.2V QFN-10(2x2) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversLIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsBMA456
LGA-12(2x2)-40℃~+85℃ 1.62V~3.6V 16bit 1KB 3.5uA Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSBosch SensortecAccelerometersMAX17048G+T10
DFN-8-EP(2x2)-40℃~+85℃ 1 2.5V~4.5V 3uA I2C Lithium Battery Not supported Not supported DFN-8-EP(2x2) Battery Management ROHSMaxim Integrated (Analog Devices)Battery ManagementNPM1100-QDAA-R
QFN-24(4x4)-40℃~+85℃ 1 4.1V~6.7V Lithium-ion/Polymer QFN-24(4x4) Power Management - Specialized ROHSNordic SemiconBattery ManagementTL6340AF160Q
SMD-40℃~+85℃ 1.6N 1.95mm 12V 200,000 Cycles 20mA 3.85mm IP67 Rectangular Button SMD(SMT) Tab SPST-NO Surface Mount, Right Angle SMD Tactile Switches ROHSE-SwitchTactile Switches2450AT18D0100001E
SMD-4PSMD-4P Antennas ROHSJohanson DielectricsAntennasFH19C-7S-0.5SH(10)
SMD,P=0.5mm,卧贴-55℃~+85℃ 0.2mm 0.5mm 0.88mm 7P Bottom Contact Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector AssembliesVZ43FC1B5640005L
-Vibration MotorsJinlong Machinery
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C11, C14, C21, C22, C23, C26, C27, C29 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C17, C24, C25, C28 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C20 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C9, C10 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C6 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 9pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | TL6340AF160Q | watch:SW_TL6340AF160Q | SW1, SW2 |
| 1 | 1.2pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 15nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 2.2nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 1 | 2.2uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L5 |
| 1 | 2130830005 | watch:MOLEX_2130830005 | J1 |
| 1 | 2450AT18D0100001 | watch:ANTENNA_2450AT18D0100001 | AE1 |
| 1 | 32.768kHz | watch:XTAL_SC32S | Y2 |
| 1 | 32MHz | watch:XTAL_ECX-1637B2 | Y1 |
| 1 | 4.7nF | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L3 |
| 1 | 402530 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | BT1 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 560R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 820pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | BMA456 | watch:XDCR_BMA456 | U4 |
| 1 | DRV2603 | watch:DRV2603RUN | U5 |
| 1 | FH19C-7S-0.5SH | watch:FH19C-7S-0.5SH | J2 |
| 1 | LIS3MDL | watch:LIS3MDLTR | U6 |
| 1 | LS012B7DH02 | watch:AYF531035A | DS1 |
| 1 | MAX17048G+ | watch:MAX17048G&plus_ | U3 |
| 1 | NRF52833-QDAA | watch:nRF52833-QD | U1 |
| 1 | RESET | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3 |
| 1 | SWDCLK | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | SWDIO | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | VZ43FC1B5640005L | watch:VZ43FC1B5640005L | M1 |
| 1 | nPM1100-QD | watch:nPM1100-QD | U2 |
The 59 most common of 61 parts.
More from cruzsbrian/smartwatch
4- 4 layers20.8 × 29 mm

- 2 layers10 × 31.6 mm

- 2 layers18.8 × 26.4 mm

- 2 layers13.7 × 16.3 mm

Similar boards
- 6 layers131 × 27.4 mm

- 2 layers80 × 70 mm

Esp
technoparrot01/indicatron
Clock with 400 seven-segment indicators, RTC and Wi-Fi support
54 parts1GPL-3.0 - 4 layers85 × 56 mm

- 4 layers40 × 40 mm

- 4 layers14 × 44 mm

- 4 layers50 × 50 mm

- 4 layers30 × 30 mm

Lmp91000-pcb
sigmondkukla/lmp91000
This repository contains the C++ firmware for the custom potentiostat platform (featuring an LMP91000 analog front end, EFR32BG24 MCU, and an LSM6DSV IMU) alongside a Python-based real-time wireless BLE debugging client.
54 parts1 - 4 layers66 × 42 mm

Questions
How big is the Watch PCB?
It measures 38 × 39 mm and has 6 copper layers, 0.79 mm thick.
What parts does the Watch use?
61 parts, built around the NRF52833-QDAA-R, DRV2603RUN, LIS3MDL and BMA456. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Watch KiCad files?
From the cruzsbrian/smartwatch repository on GitHub, at the commit this page was made from: the board is watch_hw/watch.kicad_pcb and its schematic breakout_boards/acc_brkt/acc_brkt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Watch design in my own project?
Its repository states no licence, so its author keeps all rights: ask cruzsbrian before reusing the design.