

Radio board
Designs for the TART-3 electronics hardware
- Size
- 55.2 × 62 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 142
- Nets
- 128
- Pads
- 556
- Tracks, vias
- 818, 397
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Sep 2022
- Updated
- 14 Aug 2025
Overview
Radio board is an open-source printed circuit board by tart-telescope, from the tart-telescope/radio_module repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 55.2 × 62 mm with 142 parts on 128 nets, routed with 818 tracks and 397 vias.
It is built around the CS48520S, CDCV304PW and GZ1608D601TF, with the LQG15HS33NG02D among its other parts. Its parts include 62 capacitors, 39 resistors, 12 diodes, 9 connectors and 6 ICs. It belongs with the radio and wireless boards of this library.
Main components
4CS48520S
SOIC-8-40℃~+125℃ 1 1 1.5mA 20Mbps 256 3V~5.5V Half-Duplex Transceiver ±20kV SOIC-8 RS-485 / RS-422 ICs ROHSChipanalogRS-485 / RS-422 ICsCDCV304PW
TSSOP-8-40℃~+85℃ 1 2.3V~3.6V 200MHz 4 TSSOP-8 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, Drivers, DistributorsGZ1608D601TF
0603-55℃~+125℃ 1 200mA 450mΩ 600Ω@100MHz ±25% 0603 Ferrite Beads ROHSSunlordFerrite BeadsLQG15HS33NG02D
04021.6GHz 33nH 350mA 580mΩ 8@100MHz ±2% 0402 Inductors (SMD) ROHSMurataInductors (SMD)
README
README.mdradio_module
Code for the TART-3 radio module (verilog for the FPGA, C for the microcontroller)
Parts
142| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C12, C13, C15, C16, C18, C21, C24, C25, C27, C28, C30, C33, C36, C37 +10 |
| 19 | 100 | Resistor_SMD:R_0402_1005Metric | R3, R4, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41 +3 |
| 12 | 0.47n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C14, C17, C19, C26, C29, C31, C38, C41, C43, C50 |
| 12 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R13, R14, R15, R17, R18, R19, R21, R22, R23 |
| 8 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C20, C32, C44, C54, C57, C60 |
| 8 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C52, C53, C55, C56, C58, C59 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R2, R25, R26, R27 |
| 4 | 100pF | Capacitor_SMD:C_0402_1005Metric | C10, C22, C34, C46 |
| 4 | 20k | Resistor_SMD:R_0402_1005Metric | R1, R16, R20, R24 |
| 4 | 27pF | Capacitor_SMD:C_0402_1005Metric | C11, C23, C35, C47 |
| 4 | ANT | Diode_SMD:D_0603_1608Metric | D2, D5, D8, D11 |
| 4 | CLKOUT | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP3, TP4, TP5 |
| 4 | GZ1608D601TF | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 4 | LD | Diode_SMD:D_0603_1608Metric | D3, D6, D9, D12 |
| 4 | LQG15HS33NG02D | Inductor_SMD:L_0402_1005Metric | L1, L2, L3, L4 |
| 4 | MAX2769B | Package_DFN_QFN:TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias | U1, U3, U4, U5 |
| 4 | PWR | Diode_SMD:D_0603_1608Metric | D1, D4, D7, D10 |
| 4 | RF | radio_module:CONN-SMD_KH-SMA-KE8-G | J2, J5, J7, J9 |
| 4 | Shield | RF_Shielding:Laird_Technologies_BMI-S-101_13.66x12.70mm | J3, J4, J6, J8 |
| 2 | GND | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2 |
| 1 | CDCV304PW | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U6 |
| 1 | CS48520S | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ~ | Connector_PCBEdge:BUS_PCIexpress_x1 | J1 |
More from tart-telescope/radio_module
6- 6 layers199.4 × 169 mm

- 6 layers168.8 × 105.3 mm

- 4 layers100 × 100 mm

- 4 layers100 × 71 mm

- 2 layers67.6 × 44.4 mm

Spartan6 correlator
tart-telescope/radio_module
Designs for the TART-3 electronics hardware
5 parts3GPL-3.0 - 4 layers67.6 × 78.5 mm

Correlator to papilio
tart-telescope/radio_module
Designs for the TART-3 electronics hardware
2 parts3GPL-3.0
Similar boards
- 2 layers31.8 × 57.2 mm

- 6 layers59 × 62 mm

- 6 layers107 × 78 mm

Zipper
myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware
945 parts49 - 4 layers115 × 82.3 mm

MainPCB
HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera
Documentation of the merged wigglegram camera
288 parts12 - 6 layers100.3 × 68.6 mm

MYRIAD RD 5.1.2.unrouted
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
984 parts7BSD-3-Clause - 4 layers100 × 100 mm

AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 4 layers43.2 × 62 mm

USBAudioBridge
fsodari/USBAudioBridge
NXP RT1010 based USB to I2S bridge to connect to a Digilent Arty A7.
120 parts - 2 layers170 × 80 mm

Questions
How big is the Radio board PCB?
It measures 55.2 × 62 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Radio board use?
142 parts, built around the CS48520S, CDCV304PW, GZ1608D601TF and LQG15HS33NG02D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Radio board KiCad files?
From the tart-telescope/radio_module repository on GitHub, at the commit this page was made from: the board is hardware/radio_board/design.kicad_pcb and its schematic hardware/correlator_to_papilio/correlator_to_papilio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Radio board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).