Skip to the content
4 layers48.3 × 48.3 mmUIUCBreakout, the printed circuit board in 3D

Hardware designs for tags and bases

Size
48.3 × 48.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
13
Nets
37
Pads
79
Tracks, vias
120, 27
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Apr 2026
Updated
5 Nov 2026

Overview

UIUCBreakout is an open-source printed circuit board by tag-designs, from the tag-designs/hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 48.3 × 48.3 mm with 13 parts on 37 nets, routed with 120 tracks and 27 vias.

It is built around the AT25FF321A-SHN-B, BMP585 and ADXL367BCCZ-RL7, with the CC0603KRX7R9BB104 among its other parts. Its parts include 7 capacitors, 3 ICs, 2 connectors and 1 resistor.

Main components

4

README

README.md

Tag Designs: Hardware

Board and mechanical designs for the ultralight archival data loggers (tags) documented at https://tag-designs.github.io/.

PathHolds
BoardDesigns/KiCad schematics and layouts for the tags and base boards, with their KiBot fabrication configurations
Mechanical/OpenSCAD sources for cases, carriers and harness jigs
docs/The hardware documentation site, published at https://tag-designs.github.io/hardware/
STM32_open_pin_dataST's pin-data submodule, used by the design-rule helpers

Board designs reach the shared symbol and footprint libraries through ${KIPRJMOD}/../../, so a board is tied to its depth in the directory tree. Moving one between directories is more than a move.

Regenerating the figures

The documentation's board renders and schematic PDFs are generated from the KiCad files and committed, because the workflow that publishes the site has no KiCad in it. After editing a board:

sh
cmake -S BoardDesigns -B build-boards
cmake --build build-boards --target board-docs

BoardDesigns/REGENERATING.md covers the targets, the three checks that guard the figures, what each of their messages means, and why generation is not done in CI. Read it before chasing a render that looks wrong — in particular, kicad-cli reports nothing at all when it cannot find a 3D model.

License

Copyright © 2018–2026 The Trustees of Indiana University.

This source describes Open Hardware and is licensed under the CERN Open Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0). You may redistribute and modify this source and make products using it under the terms of that licence, whose full text is in LICENSE and at https://ohwr.org/cern_ohl_p_v2.txt.

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the licence for applicable conditions.

The STM32_open_pin_data submodule is ST's and carries its own license. The software that runs on these boards lives in a separate repository under the MIT License; see the project licensing summary.

Parts

13
QtyValueFootprintReferences
50.1ufCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C5, C7
2Conn_01x17tag_library:PinHeader_1x17_P2.54mm_Vertical_StaggeredJ3, J4
10.22ufCapacitor_SMD:C_0603_1608MetricC4
110libraries:R_0603_1608MetricR1
14.7ufCapacitor_SMD:C_0603_1608MetricC6
1ADXL367BCCZ-RL7libraries:CC-12-4_ADIU2
1AT25FF321A-SHN-BPackage_SO:SOIC-8_5.3x6.2mm_P1.27mmU1
1BMP585libraries:LGA9_BMP585_BOSU3

More from tag-designs/hardware

12
  • 4 layers53.3 × 73.7 mmTag breakout l432-1v8-v1, the printed circuit board in 3D

    Tag breakout l432-1v8-v1

    tag-designs/hardware

    Hardware designs for tags and bases

    54 parts2CERN-OHL-P-2.0
  • 4 layers53.3 × 73.7 mmTag breakout u375-smps v1, the printed circuit board in 3D

    Tag breakout u375-smps v1

    tag-designs/hardware

    Hardware designs for tags and bases

    51 parts2CERN-OHL-P-2.0
  • 4 layers50.8 × 69.9 mmTagbase lipo v1, the printed circuit board in 3D

    Tagbase lipo v1

    tag-designs/hardware

    Hardware designs for tags and bases

    50 parts2CERN-OHL-P-2.0
  • 2 layers53.3 × 73.7 mmTag breakout v2, the printed circuit board in 3D

    Tag breakout v2

    tag-designs/hardware

    Hardware designs for tags and bases

    45 parts2CERN-OHL-P-2.0
  • 2 layers53.3 × 73.7 mmTag breakout l432v2, the printed circuit board in 3D

    Tag breakout l432v2

    tag-designs/hardware

    Hardware designs for tags and bases

    43 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 69.9 mmTagbase jlcpcb v3, the printed circuit board in 3D

    Tagbase jlcpcb v3

    tag-designs/hardware

    Hardware designs for tags and bases

    40 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 69.9 mmTagbase jlcpcb v7, the printed circuit board in 3D

    Tagbase jlcpcb v7

    tag-designs/hardware

    Hardware designs for tags and bases

    40 parts2CERN-OHL-P-2.0
  • 4 layers21.5 × 11.5 mmImutag nand, the printed circuit board in 3D

    Imutag nand

    tag-designs/hardware

    Hardware designs for tags and bases

    37 parts2CERN-OHL-P-2.0
  • 4 layers21.5 × 11.5 mmImutag nand bmp581, the printed circuit board in 3D

    Imutag nand bmp581

    tag-designs/hardware

    Hardware designs for tags and bases

    36 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 36.9 mmImutag daughtercard, the printed circuit board in 3D

    Imutag daughtercard

    tag-designs/hardware

    Hardware designs for tags and bases

    34 parts2CERN-OHL-P-2.0
  • 2 layers50 × 35 mmTagMagAccelPresBreakout, the printed circuit board in 3D

    TagMagAccelPresBreakout

    tag-designs/hardware

    Hardware designs for tags and bases

    34 parts2CERN-OHL-P-2.0

Similar boards

  • 4 layers19.1 × 26.3 mmEarworm hardware, the printed circuit board in 3D

    Earworm hardware

    jeff-shulkin/earworm_hardware

    Hardware files for the EarWorm project.

    49 parts1
  • 2 layers50.8 × 88.9 mmSolar glow drh v4 0, the printed circuit board in 3D

    Solar glow drh v4 0

    devinhorowitz/solar-business-card

    Front — the card face Back — the component side

    70 partsMIT
  • 4 layers82.8 × 33 mmE ink watch, the printed circuit board in 3D

    E ink watch

    sandgum/Triangulate-ES_01-Watch

    A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

    162 parts22
  • 2 layers140 × 60 mmFlight computer, the printed circuit board in 3D

    Flight computer

    Serra-Rocketry/flight-computer

    [Telemetry] Onboard flight computer for rocket avionics.

    44 partsMIT
  • 8 layersSportwatch revA, the printed circuit board in 3D

    Sportwatch revA

    slimmpylk/Skoll_Ultra

    a custom outdoor and endurance-sports smartwatch.

    184 parts
  • 4 layers120 × 76 mmPanel, the printed circuit board in 3D

    Panel

    vbartusevicius/weather-station

    Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…

    235 parts

Questions

How big is the UIUCBreakout PCB?

It measures 48.3 × 48.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the UIUCBreakout use?

13 parts, built around the AT25FF321A-SHN-B, BMP585, ADXL367BCCZ-RL7 and CC0603KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UIUCBreakout KiCad files?

From the tag-designs/hardware repository on GitHub, at the commit this page was made from: the board is BoardDesigns/Prototypes/UIUCBreakout/UIUCBreakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the UIUCBreakout design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).