
Lighthouse base
mwuerms/lighthouse_hardware
+ lighthouse + buoy: hand sender, ble advertising

Ultimate mischung is an open-source printed circuit board by Bestsage, from the Bestsage/Ultimate_mischung repository on GitHub. It is a 4-layer board of 18 × 50 mm with 62 parts on 77 nets, routed with 640 tracks and 71 vias.
It is built around the RP2354A, SAM-M10Q-00B and TPS62823DLC, with the W25Q128JVSIQ, BMP585 and AMS1117-5.0 among its other parts. Its parts include 26 capacitors, 14 resistors, 7 connectors, 6 ICs and 2 diodes. It belongs with the RP2350 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nf | Capacitor_SMD:C_01005_0402Metric | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C18, C19, C22 |
| 6 | 10uf | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C17, C20, C21 |
| 5 | 10k | Resistor_SMD:R_0201_0603Metric | R2, R3, R4, R5, R7 |
| 4 | Conn_01x02 | Connector_JST:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J3, J4, J5, J7 |
| 2 | 100K | Resistor_SMD:R_0201_0603Metric | R12, R14 |
| 2 | 10R | Resistor_SMD:R_0201_0603Metric | R8, R10 |
| 2 | 15pf | Capacitor_SMD:C_0201_0603Metric | C23, C24 |
| 2 | 1R | Resistor_SMD:R_0201_0603Metric | R9, R11 |
| 2 | 1uH | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R1, R6 |
| 2 | Conn_01x04 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J1, J6 |
| 2 | IRLML6244 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1uf | Capacitor_SMD:C_0201_0603Metric | C25 |
| 1 | 22uf | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 470K | Resistor_SMD:R_0201_0603Metric | R13 |
| 1 | ABM10-166-12.000MHZ-T3 | Crystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BMI270 | Library:XDCR_BMI270 | U2 |
| 1 | BMP585 | Library:XDCR_BMP585 | A1 |
| 1 | LOGO | LOGO | G*** |
| 1 | PMEG4002EJ | Diode_SMD:D_SOD-523 | D1 |
| 1 | RP2354A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | SAM-M10Q-00B | Library:SAM-M10Q_UBL | U4 |
| 1 | TPS62823DLC | Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm | U6 |
| 1 | USB4105-GF-A | Library:GCT_USB4105-GF-A | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D2 |

mwuerms/lighthouse_hardware
+ lighthouse + buoy: hand sender, ble advertising

jakeread/knuckles-imu-lsm6-lis2-rp2354a
This is an IMU module that pairs the LSM6DSV16X accelerometer with an LIS2MDL magnetometer, using an RP2354A microcontroller.


Tropaion/Manafish_Mainboard
The Manafish Mainboard is the main electronics board of the Manafish ROV. It replaces the Raspberry Pi 3B, the USB-connected Raspberry Pi Pico and the wiring between them with one board:




PennyLekas/Nixie-Clock
v1 is broken and required some bodge wires to work. I have not updated the schematic and PCB to correct my mistakes. It also has some deficencies in the dimming circuit resulint in a quiet, but audible whine.
It measures 18 × 50 mm and has 4 copper layers, 1.6 mm thick.
62 parts, built around the RP2354A, SAM-M10Q-00B, TPS62823DLC and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bestsage/Ultimate_mischung repository on GitHub, at the commit this page was made from: the board is Ultimate_mischung.kicad_pcb and its schematic Ultimate_mischung.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Bestsage before reusing the design.